Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC E 84 OF HQ CWE NW MUMBAI AGE 87 1 3 GEETA NAGAR NAVY NAGAR COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Lowest One | |
| 2 | L2₹34.1 L+₹3 L (9.65%)Rejected-Finance | L2 | Rejected-Finance Other than lowest one | |
| 3 | L3₹38.5 L+₹7.4 L (23.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest one |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
2 Sept 2021, 6:00 pmClosed
GE NW NOFRA
Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR REPLACEMENT AND MAINTENANCE OF E/M FITTING FIXTURES INCLUDING DBs MAIN SWITCHES SUB MAIN SERVICE CONNECTION EARTHING AND DAY TO DAY MAINT OF GEYSER AT OUTLYING AREA UNDER GE NW NOFRA COLABA MUMBAI
2021_MES_467600_1
8957
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹80,000
Yes
25 Jan 2022
12 Aug 2021
6 Sept 2021
12 Aug 2021
2 Sept 2021
21 Aug 2021
12 Aug 2021 - 20 Aug 2021
Amount
Material & labour for unscrewing body parts of fans of any make/brands and description and opening of the stator & rotor of following sizes of fans and taking out down rod canopy,shackle, condeser housing with rubber reel bushes,ball bearing,metal bush and carry out repairs as directed and as required as under:- (a). M&L for opening the stator & rotor of the 1200mm / 1400 mm sweep ceiling fan cutting the exsisting worn winding & rewinding the fan with superior quality rewinding wire & filling the warnish as insulation between each winds & covering each loops of winding by sleeves & paper & reassembling of complete fan by fixing servicable old and new parts of fans i.e. rubber bush of condensor & shackle housing , condensor, gun metal bushes,ball bearings twin twisted copper cable down rod assembly with its shackle condenser housing & canopy ,split pins complete all as per manufacturers design air delivery including greasing,oiling & testing of fans all as per manufacturers design & speed complete all as directed & approved for 1200mm / 1400mm sweep. NOTE for item No 1.00 to 4.00 are :-
(i). The quoted unit rate shall be deemed to be inclusive of taking out defective parts. All new parts shall be measured and paid vide relevant items of the schedule. (ii). The rates for refixing & taking out servicable parts shall be deemed to be included in quoted unit rates. (iii). New parts shall be of respective makes of fans. (iv). The quoted unit rates shall also include writing of MES No of fans (v). Unservicable /defective retrived parts shall be credited vide sch of creidt. (vi). After assembling all fans shall be tested for the speed as directed. (vii). All the fans are laying in store yard of AGE E/M and shall be repaired at store yard only.
All as per srl item No 1.00 , 1.01 here-in-before but for wall mounting fans/air circulation fans of any size complete all as specified and directed by Engineer in charge.
All as per srl item No 1.00 , 1.01 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep complete all as specified and directed by Engineer in charge.
All as per srl item No 1.00 , 1.01 here-in-before but for Exhaust fans of 450 mm sweep complete all as specified and directed by Engineer in charge.
Supply & Fix in repair elctronic Fan regulator 400 watt step type heavy duty complete all as specified and directed by Engineer in charge. Make: Havells, legrand ,Goldmedal
supply and fix in repair GI U clamp heavy duty rubber reel of superior quality and nut and bolts with locking arrangement complete all as specified and directed by Engineer in charge.
Supply & Fixing of PVC canopy cover superior quality complete all as specified and directed by Engineer in charge.
M&L for cleaning the fan motor assembly body,blade of ceiling fan, filling the cavity & painting with existing colour the ceiling fan/Exhaust fan with one coat of superior quality synthetic enamel paint by spraying appratus and spraying process including writing the MES number on the ceiling fans of 1200mm /1400 mm sweep with black colour synthetic enamel paint complete all as specified and directed by Engineer in charge.
All as per srl item No 08 here-in-before but for wall mounting fan / air circulatoe of any size complete all as specified and directed by Engineer in charge.
All as per srl item No 08 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep complete all as specified and directed by Engineer in charge.
Supply & Fixing of bearing No 6201/6202 of any size any type for 1200/1400mm sweep ceiling fans complete all as specified and directed by engineer in charge. Make NBC, SKF , equivalent as approved by GE.
Taking down old unserviceable recess mounting tube light. Supply and fixing serene tube light 2 x 2 fit panel 36 Watts LED luminary back lit recess mounting, CRCA housing white powder coated, with decorative polymer diffuser complete with accessories locking arrangement, clips, per wire for connection and fixing in falls ceiling all as directed by Engr-in-charge. MAKE : Havells/ Philips/ Jaquar
Supply & Fixing of capacitor 2.5 MFD dry type complete all as specified and directed by engineer in charge. Make: Amcap , Epson , equivalent as approved by GE.
Supply & Fixing of capacitor 4.0 MFD dry type complete all as specified and directed by engineer in charge. Make: Amcap , Epson , equivalent as approved by GE.
Supply & Fixing of gun metal bush suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed by engineer in charge.
S&F Clamp nut , bolt incliding safety pin for ceiling fan including taking down old pin complete all as specified and directed by engineer in charge.
S&F steped type fan regulator step type electronic of capacity 300/450 watt working on 230 Volts including taking down old one complete all as specified and directed by engineer in charge.
Taking down old unserviceable rusted extaust fan shutter and supply and fixing shutter of size 255 to 450 mm sweep complete all as specified and directed by engineer in charge.
Making round/ squar hole cutting in the kitchen wall with the help of cutting machine / chisel / hammer etc for fixing of exhaust fan of size 225 mm to 300 mm & making good to the distrubed surface including plaster, distumper , white wash complete all as specified and directed by engineer in charge.
Checking serviceability of all ceiling fans/ exhaust fan in each quarter and checking clamps nut, bolts, pins are in healthy condition If any problem in any items will be note down by electrician and informed concerned JE E/M and rectify the problem next day complete all as specified and directed by engineer in charge. Note : All the items will be paid separately
Supply and fixing the ceiling fans complete with blades, down rods , 230 volts , 1200 sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushles direct current motor and fixed to ceiling and connecting up including provision of flexible 3 core copper cable and testing smooth functioning at site complete all specified and directed. Make : Havells / Orient / Philips Note : a) The ceiling fans consider against BER. b) Old fan shall be deposited to the MES store in Bhagirathi Building as directed by Engineer in charge.
Note :- 1. LT Panel shall be fabricated from CPRI approved Manufacturer. 2. Comprising of the following items :- (a) MCCB 400A, rated for 415Volt, 4 pole, 3 Phase, rupturing capacity of 36KA, Thermal-Magnetic type MCCB, Qty-01 No. (incoming), the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity (Icu) i.e. Ics =100% Icu. (Thermal adjustment and magnetic adjustment setting) (b) MCCB 250A, Rated for 415Volt, 4 pole, 3 Phase rupturing capacity of 36KA, Thermal-Magnetic type MCCB, Qty-01 No. (Outgoing) the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity (Icu) i.e. Ics =100% Icu. Fixed Thermal and magnetic setting Make : Legrend /L &T/Havells (c) MCCB 160 A, Rated for 415Volt, 4 pole, 3 Phase, rupturing capacity of 25kA, Thermal-Magnetic type Qty-01 No (Outgoing) the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity (Icu) i.e. Ics =100% Icu.Fixed Thermal and magnetic setting
(d) MCCB 100 A, Rated for 415Volt, 4 pole, 3 Phase, rupturing capacity of 25kA, Thermal-Magnetic type Qty-05 No (Outgoing) the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity (Icu) i.e. Ics =100% Icu.Fixed Thermal and magnetic setting Make : Legrend /L &T/Havells (e) MCCB 63 A, Rated for 415Volt, 4 pole, 3 Phase, rupturing capacity of 25kA, Thermal-Magnetic type Qty-01 No (Outgoing) the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity (Icu) i.e. Ics =100% Icu.Fixed Thermal and magnetic setting Make : Legrend /L &T/Havells (f) MCB, SPN, 63 Amp , Fixed thermal setting, fixed magnetic setting-01No. (g) MCB, SPN, 32 Amp , Fixed thermal setting, fixed magnetic setting-06No. (h) Change over switch on load type 400 Amps, pole, panel mounted type, front operated 425 Volts, 50 Hz supply 01 No
Supply and fixing in Replacement of electrical motors star delta starter fully automatic sheet steel enclosre of capacity 75 HP and front side openable with locking arrangement complete all as specified and directed by engineer in charge.
Supply and fixing in replacement on load manually change over sheet steel enclosre 400 Amps , TPN (04 Pole ) type and front side openable with locking arrangement and manually handle , gland plate in both side for holding of cable , including holding plate for hanging on wall complete all as specified and directed by engineer in charge. MAKE : Havells / Legrand / L&T / Schneider
Supply and fixing in replacement on load manually change over sheet steel enclosre 250 Amps , TPN (04 Pole ) type and fron side openable with locking arrangement and manually handle , gland plate in both side for holding of cable , including holding plate for hanging on wall complete all as specified and directed by engineer in charge. MAKE : Havells / Legrand / L&T / Schneider
Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by engineer in charge.
Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC casing & caping of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement , ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular boxes surfacing on wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-
(a) One light point controlled by one switch SP one way.
(b) One ceiling fan point controlled with one 5 A switch
(c) One exhaust fan point controlled with one 5 A switch
(d) One 3 pin socket outlet 5 Amps on independant board.
(e) One 3 pin socket outlet 5 Amps on same board with other switches.
(e) One 3 pin socket outlet 15 Amps on same board with other switches.
Material and Labour point wiring for Geyser /AC complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC pipe of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.
Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC pipe of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.
Supply and fix Modular Switch, 6Amp, One way, 1 module. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix support function blank plate single, 1 module complete all as specified and directed. Make : Legrand / Havells / Gold Medal.
Supply and fix Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed . Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.
Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix Modular white cover plate with Frame 2 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 3 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 4 Module complete all as specified and directed.Make : Legrand(Arteor), Havells(Coral) , Anchor(Ave) .
Supply and fix Modular white cover plate with Frame 6 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 2 module including cutting and chassing complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 3 module including cutting and chassing complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 4 module including cutting and chassing complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 6 module including cutting and chassing complete all as specified and directed.Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix baton intergrated LED channel 1x20WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by engineer in charge. Make : Havells/Philips/Jaquar as approved by GE.
Supply and fix baton intergrated LED channel 1x10WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by engineer in charge. Make : Havells/Philips/Jaquar as approved by GE.
Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed by engineer in charge.
Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping /conduit of suitable dia 20 and 25 mm, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Make : Polycab, Havells, Plaza, Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC conduit/ casing and caping as per site requirement
Supply and fix submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in and including PVC casing caping /conduit of suitable dia 20 and 25 mm, ISI marked including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Make : Polycab, Havells, Plaza as approved by GE. Note :- (i) Two runs of 6 Sqmm cable, 1 run of PVC casing caping and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC conduit/ casing and caping as per site requirment
Supply and fix sheet metal enclosure 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make: ABB/Strandard/ Legrand /Havells
Supply and fix sheet metal enclosure 8 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed . Make: ABB/ Strandard/ Legrand /Havells
MCB SPN 63 Amps, 240 Volts - 01 No Make - Legrand/Standard/ Havells
MCB SP 6-32 Amps, 240 Volts - 10 Nos Make - Legrand/Standard/ Havells
Supply and fix in repair PVC Box for fixing of Switches, sockets , regulators with fixing accessories complete of the following sizes :-
(a) -do- but size 4”x4”
(b)-do- but size 4” x 7”
(c)-do- but size 6” x 8”
(d)-do- but size 10” x 8”
Supply and fix in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply complete all as specified and directed. Make :Jaquar / Philips/ Havells
Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by engineer in charge.
NOEL ENGINEERS
DHARMESH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .