For Various type maintenance work of HT/LT lines, poles and Transformer installed different place in the area of Sub-Division, Puraniya, Under the jurisdiction of EUDD-Daliganj, LESA, Trans Gomti. Lucknow.

Amount

Safe loading, carriage & unloading of following material from J.E.'s store Daliganj and from J.E.'s stores to work at site.

S.T. Pole 9 Mtr long/8.5 Mtr PCC Pole

Dragging of ST/PCC pole to pit site, digging of pit erection and grouting (As per RESPO norms) of 11KV 9/11/8.5 mtr long ST/PCC pole with fixing of necessary items, such as V-type X-arm, F-bracket, 11KV Pin/Disc insulator, guarding angle(1.8 mm65x65x6) with nut & bolts its ramming as per RESSPO Specification. Only pole & insulator shall be supplied by the department.

Dismantling of existing rusted/damaged ST pole 9 meter long after opening and dismantling of all the wire and accessories of LT line, including opening of binding insulator, LT clamp and its carriage back up to JE store Daliganj&Errection of 9 meter long ST pole by digging of pit, binding of LT line accessories, grouting, Plinthing, painting of pole. Only ST pole provided by the department

Dismantling of existing damaged PCC Pole 8.5 meter long after opening and dismantling of all the wire and accessories of LT line, including opening of binding insulator, LT clamp and its carriage back to JE store Daliganj&Errection of 8.5 meter long PCC pole by digging of pit, binding of LT line accessories, grouting and proper errection of pole. Only PCC pole provided by the department.

Opening and dismantling of all the wire and accessories from tilted pole and digging the pit for strengthening of existing tilted support of HT/LT lines after strengthening of tilted pole fixing of all accessories and re-stringing of old HT/LT line with help of T&P.

Repairing of Partially damaged STP Pole due to rusting by properly cleaning of rust, painting with red-oxide premium on rusted portion and welding of angle of size 65x65x6mm angel iron on rusted portion and its proper concreting with cement, sand mortar & stone ballast around a pole up to 1 feet above & below the ground level

Repairing of existing wiremessfancing including replacement of wiremesh, angle/flat, repairing of doors with locking arrangement damaged (All material to be arranged by the contractor)

Checking of oil leakage from T/F and making necessary remadies to check the leakage bydraining of oil from T/F, opening of LT/HT connection. Opening of Top cover and replacement of porcelenelacement of per celain oil seal etc. and their boxing up and tightening of LT/HT connection.

Checking of oil leakage from T/F and replacement of oil seal etc. and tightening.

Pipe type earthing with 80 fit deep borring and providing Jindal make GI pipe 1" dia (80 fit GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece , nut & bolts and GI pipe cap.

Cutting and chopping of tree branches for clearance of HT/LT Line in the area of 33/11 KV S/S Puraniya. After clearance line throughout pieces of tree branches of site.

POWER CONTROL AND SWITCHGEARS

MEEMANSA ENTERPRISES