Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹10.9 LAWARDED | AWARDED |
Tender Value
₹14.3 L
EMD Value
₹42,500
Closing Date
29 Dec 2025, 10:50 pmClosed
Rural Development and Panchayat Raj Department
Construction of Anganawadi Center in Naganayakanahalli Village, Nelaguli GP, which has a large population of Scheduled Tribe community in Bengaluru South Taluk Bangalore Urban District (Under Untied Grants/2515-00-196-1-22-300/2025-26)
RDPR/2025-26/BD/WORK_INDENT22091
RDPR/2025-26/BD/WORK_INDENT22091
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Bengaluru Urban
₹500
₹42,500
22 Dec 2025
22 Dec 2025
26 Dec 2025
Construction of Anganawadi Center in Naganayakanahalli Village, Nelaguli GP, which has a large population of Scheduled Tribe community in Bengaluru South Taluk Bangalore Urban District (Under Untied Grants/2515-00-196-1-22-300/2025-26)
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and
plinth including levelling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Coursed rubble masonry (first sort) with hard stone in foundation
and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ........ with all lead, lift, loading, unloading, labour, fuel,...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x150x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding, in...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and remov...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Finishing walls with 100% Premium acrylic emulsion paint having VOC
less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC
less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Providing Cement mortar 1:4 (1 cement : 4 fine sand) including cost of all
materials, labour and usage charges of machinery complete as per the direction of engineer incharge of work...... with all le...
Extra for providing and mixing water proofing material in cement plaster
work in proportion recommended by the manufacturers including cost of
material etc as per specifications and as per directions ...
Providing and laying Vitrified tiles with thickness 9-10 mm in different
sizes with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, over 12 mm...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming
to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing brass bib cock of approved quality :..... with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per de...
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the w...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making go...
Providing flooring with 25mm thick polished Cuddapah slabs using cement
mortar 1:6, 25mm thick over existing cement concrete bed or top of roof
laid to line and level and jointed with cement slurry mi...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6
mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a primi...
Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled
Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and
15x15mm for top & bottom rails, covered with heat moulded Pr...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joint...
Providing and fixing hand rail of approved size by welding etc. to steel
ladder railing, balcony railing, staircase railing and similar works,
including applying priming coat of approved steel primer....
Lettering with black Japan paint of approved brand and manufacture to give
an even shade including preparing the surface after thoroughly cleaning the
surface to remove all dirt, dust and foreign matt...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including
MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS
sheets, with hinges, locking arrangements at top etc. includi...
Providing to work spot rolling, lowering and placing in position
RCC perforated rings in the already excavated pit including loading
and unloading at both the destinations with all lead and lift with
Providing and laying 100mm thick pre-cast cover slabs over drains &
Rain pit of width not exceeding 800 mm using M20 concrete reinforced
with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...
Providing and fixing rectangular high density polyethylene water storage
loft tank with cover, conforming to ISI : 12701, colour of opaque white or
as approved by Engineer-in-charge. The rate includes...
Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs incase of RCC c...
Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293...... with all lead, lift, loading, unloading, labour, fuel, hire charges of ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293...... with all lead, lift, loading, unloading, labour, fuel, hire charges of ...
Supplying of.....feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input:220-240V @ 50/60Hz & Power f...
Supplying & fixing of retrofit type LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70% .efficacy 80 lumenper W, life 25000 burning hours and Compliance ...
Fixing all types and all capacities of fluorescent /falseceiling /spotlight /CFL/ LED fittings indoor on the wall/ ceiling/ rafters/ girders using 23/0.0076" twin twisted PVC insulated wires, required...
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230V, 50Hz AC supply & completely wired on existing box...... with all lead, lift, loading, unloading,...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293...... with all lead, lift, loading, unloading, labour, fuel, hire charges of ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball beari...
Fixing a ceiling/ wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5A ceiling rose of approved quality with necessary length of ...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .