Loading
Loading…
Loading…
Tender Value
₹17.4 Cr
EMD Value
₹10.2 L
Closing Date
5 Jan 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
WORKS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'Total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of IRGCC 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. NOTE: FOR DETAILS PLEASE REFER TENDER DOCUMENT.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b) (i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 (a) (ii) of Part-II of GCC or through subcontractor fulfilling the requirements as per clause 7 of Part-II of GCC or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of Part-II of GCC, with prior approval of Chief Engineer in writing. NOTE: FOR DETAILS PLEASE REFER TENDER DOCUMENT.
Defination of Similar Work :- Electronic Interlocking Work {Indoor or (Indoor + Outdoor)} and/or Panel Interlocking Work {Indoor or (Indoor + Outdoor)} and/or Route Relay Interlocking Work {Indoor or (Indoor + Outdoor)}.
5 conditions · 1 needing a document upload
CHECKLIST OF ITEMS TO BE COMPLIED BY THE TENDERERS
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
REPLACEMENT OF OLD & OVERAGE PANEL INTERLOCKING STATIONS TO EI AT BELUR
SGW-272-252-T1-63~ER
SGW-272-252-T1-63
Open
Works - General
12 Months
Kolkata, West Bengal
₹0
₹10.2 L
5 Jan 2026
10 Dec 2025
22 Dec 2025
373 items across 3 schedules · ₹17,67,98,670.61 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Design, manufacture and supply of Electronic Interlocking (EI) system. Detailed description is given in Tender document | Per Functional Vital Bit | 450.00 | 71,896.37 | 3,23,53,366.5 |
| 2 | Installation, wiring, testing (FAT & SAT) and commissioning of EI System with 'Hot Standby' architecture as supplied above item-100101/2/3. It includes transportation of material from consignee's depot to the site, erection and grouting of EI Relay Racks, fixing and wiring of all the interfacing relays (Vital & Non-Vital) , installation and wiring of Microprocessor equipments, interface equipments, power supply equipments and all other associated accessories to make complete EI system to be functional. Note: (i) Technical Requirements are attached with tender document (ii) Contractor has to arrange simulator/ simulation testing panel for testing and commissioning by Selection Table and Square Sheet for each Signalling function.(iii) Installation, wiring, testing and commissioning of EI system will be done by OEM after following all the guidelines/ directives issued by RDSO from time to time. | Station | 1.00 | 5,96,262 | 5,96,262 |
| 3 | Training of Railway Personnel by OEM for installation, Commissioning, Testing, troubleshooting & making changes in application data and logics by railway officials to suit yard modification done at later stage including documentation. (Hard copies of training material/ course modules to be given to each participant). | Man-Days | 30.00 | 2,901 | 87,030 |
| 4 | Supply of maintainer's furniture of godrej make or superior and each set consist of(i) executive revolving bearing series low back-floating chair with normal arms cushioned chair-01 Nos. (ii) Executive table size 1650x900x728 mm with 3 drawers one side locker- 01 no.(iii) visitor chair seat & back cushion with high density foam with plastic pvc handle capsule type painted back-03 Nos. | Set | 1.00 | 23,528 | 23,528 |
| 5 | Supply and installation of housing cabinet of suitable dimensions to house VDU control terminal along with CPU, one set of input device (keyboard and mouse etc.), monitor and power supply arrangement. The detailed drawing of the cabinet along with placement of various equipments inside the cabinet shall be submitted by the tenderer and got approved by the Railway before supply. Technical requirement are attached herewith. Inspection: Consignee | Numbers | 1.00 | 1,07,974 | 1,07,974 |
| 6 | Supply of Office Chair make Godrej CH-7B or similar of reputed brand. Inspection: Consignee | Numbers | 15.00 | 2,902 | 43,530 |
| 7 | Supply of Office Revolving Chair Godrej Make Model No.9U02R Bravo or Similar of reputed brand. Inspection: Consignee | Numbers | 5.00 | 9,032 | 45,160 |
| 8 | Supply of Office table with laminated top with three drawers on left hand side and one locker on the right hand side. Olive brown with duplicate keys. Make: Godrej Model T-9 (136.5 cmX68cmX 75cm) or S i m i l a r o f r e p u t e d brand. Inspection: Consignee | Numbers | 5.00 | 12,886 | 64,430 |
| 9 | Supply of Steel Plain Almirah with 4 adjustable slaves Size: 1980mm height, 915 mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand. Inspection: Consignee | Numbers | 5.00 | 17,163 | 85,815 |
| 10 | Supply of Panel cum Block Instrument table complete as per approved drawing. It includes any modification to it if required by Engineer-in-charge at site. Inspection: Consignee | Numbers | 3.00 | 35,573 | 1,06,719 |
| 11 | Supply of Micro Processor based Data Logger System with 1024 digital and 32 analog inputs with DOT Matrix Printer,80 COL as per RDSO Spec. No. IRS (S) 99/2006 with Amdt. 3.0 or latest. It includes supply of all the items required for complete indoor relay room wiring from data logger to relay rack tag blocks, drawing/extension of power supply up to Data Logger. It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & monitoring of DG sets, ELD, IPS, UFSBI, BI, interlinking and networking of Data logger. It also includes supply of leased line MODEM and other interfacing cards, if required for networking of Data logger. This also includes supply of one no. composite computer and printer table (Godrej work station table or similar) f o r keeping processor module workstation and one number Godrej operator chair Model PCH7001 or similar. Note: (1) Total numbers of relays and other signalling functions/ gears required to be wired as per list circulated vide RDSO Letter No.STS/E/Data logger dtd.12.09. 2011 or latest guidelines of Railway Board/ RDSO/ Zonal Railway. (2) Exceptional reports are to be generated by a computer connected to datalogger at the station and at a central location i n Control Room. Datalogger software should b e able to generate e x c e p t i o n a l r e p o r t s for maintenance, safety and operations as per latest guidelines o f Railway Board/RDSO/ Zonal Railway. Datalogger to be installed at Site by OEM. Manufacturing date of datalogger/ RTU and printer should be of current year at the time of supply. Inspection: RDSO for Datalogger. Inspection: Consignee for Printer & other items. | Numbers | 1.00 | 4,96,233 | 4,96,233 |
| 12 | "Supply of Dual Leased Modem internal card to fit in central processing unit rack for networking of data logger system of other stations. Each set shall comprise of one pair of modem and shall have data compatibility 1TUV 21, V2, V22 BITS, V23V23A, B V25 BITS, V32, V32 BITS V42, V42 BITS, suitable to work in either ofc media or microwave or quad cable. Inspection: By Consignee." | Set | 1.00 | 24,433 | 24,433 |
| 13 | Installation, wiring, testing & commissioning of Micro Processor based Data Logger System with 1024 digital and 32 analog inputs as per RDSO Spec. No. IRS (S) 99/2006 or latest It cover complete indoor relay room wiring from data logger to relay rack tag blocks, drawing/extension of power supply up to Data Logger. It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & DG sets, ELD, IPS, UFSBI, BI interlinking and networking of Data logger. All material required for wiring, networking, power supply monitoring, door-locking arrangement etc. will be supplied by contractor. Note: Total numbers of relays and other signalling functions/gears required to be wired as per list circulated vide RDSO Letter No.STS/E/Data logger dtd.12.09.20 11 or latest guidelines of Railway Board/ RDSO/ Zonal Railway. Networking of data logger includes extraction of data report from Control room. Exceptional reports are to be generated by a computer connected to datalogger at the station and at a central location in Control Room. Datalogger software should be able to generate exceptional reports for maintenance, safety and operations as per latest guidelines of Railway Board/ RDSO/ Zonal Railway. Datalogger to be installed at Site by OEM. For networking, required communication channel (Quad/ OFC cable) will be arranged /provided by Rly in SM/ASM's room or in OFC/AUTO/ EI Huts and it will be extended by contractor up to location of data logger by using CAT-5/6 telecom cable with proper casing and capping. The contractor will supply all the material like CAT-5/6 telecom cable, casing & capping, nuts, bolts etc. The final commissioning will be done after filling up of Pre- Commissioning checklist (circulated by RDSO) with the OEM representative. Datalogger to be validated and commissioned before simulation test and put in network, validation statement should be jointly signed by railway engineer (open line), railway engineer (construction) & OEM'S engineer before simulation test with name, designation and date. Payment for this item will be released only after submission of duly signed pre- commissioning checklist of data logger in standard RDSO format, joint signature of validation statement. OEM'S engineer will also impart training to rly staff at site for proper functioning /working and applications of data logger. Inspection: Consignee. | Numbers | 1.00 | 51,876 | 51,876 |
| 14 | "Relay fail safe electronic time delay device with fixed timing (0 -120) seconds and conforming to RDSO Specn. No.IRS: 5- 61/2000 with Amnd.2 and IRS: S-34 & S-23 with Amdt. up to date or latest mounted on Q-series relay base & covered complete with connectors, retaining clip etc. The interlocking code for this unit shall be ""AFGKY"". Inspection authority:- RDSO" | Numbers | 10.00 | 1,591 | 15,910 |
| 15 | "Relay fail safe electronic time delay device with fixed timing (0 - 60) seconds and conforming to RDSO Specn. No.IRS: S-6 1/2000 with Amnd.1 or latest mounted on Q-series relay base & covered complete with connectors, retaining clip etc. The interlocking code for this unit shall be ""AFHKY"". Inspection authority:- RDSO" | Numbers | 10.00 | 2,118 | 21,180 |
| 16 | Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No.IRS: S-34 & S-23 with Amdt. upto date or latest. The interlocking code for this unit shall be "ABCDE". Inspection authority:- RDSO | Numbers | 80.00 | 3,769 | 3,01,520 |
| 17 | Q-Series Neutral Line Relay (QN1 Type), 8F/8B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No. IRS: S-34 & S-23 with Amdt. upto date as applicable or latest. The interlocking code for this u n i t s h a l l be "ABCDF". Inspection authority:- RDSO | Numbers | 80.00 | 3,737 | 2,98,960 |
| 18 | Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips and conforming to BRS-935A and RDSO Specn.No. IRS: 5-34 & S-23with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDEG". Inspection authority:- RDSO | Numbers | 30.00 | 5,718 | 1,71,540 |
| 19 | Q-Series LED ECR (Universal Type i.e. QECX- 61), 4F/4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS:94 1A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002, Amdt. -1 and RDSO Specn.No.IRS: S-34 & S- 23 with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be 'ABDHK' Inspection Authority: RDSO | Numbers | 80.00 | 4,912 | 3,92,960 |
| 20 | Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire and termination of 60/40 core cable/flexible wire on tag block/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on ER & the instruction o f R l y . E n g i n e e r a t site. Inspection authority:- Consignee | Numbers | 500.00 | 391 | 1,95,500 |
| 21 | "Track Relay QBAT, A C immunized, 2F-2B contacts, 9 ohms. Complete with plug board, retaining clip & connectors as per RDSO/SPN/84 Ver 2.0 or latest. The interlocking code for this unit shall be ""ABEJX"". Inspection authority:- RDSO " | Numbers | 5.00 | 6,554 | 32,770 |
| 22 | "Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn. No.IRS: S34 S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". Inspection authority:- RDSO" | Numbers | 80.00 | 3,845 | 3,07,600 |
| 23 | "Q-Series Line Relay (QNA1 Type), AC immunized, 12F/4B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 931A and RDSO Specn. No. IRS: S-34 S-23 and 5-60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be ""ABDFH"". Inspection authority:- RDSO" | Numbers | 80.00 | 4,007 | 3,20,560 |
| 24 | "Q-Series Track Relay (QTA2 Type), AC im m u n ized , 9 Ohms, 2F/ 1B along with plug board (base plate), connectors, retaining clips etc and conforming to BRS:939A & 966(Appendix F2) and RDSO Spec N o . IRS :8 34, 8-23 with amdt. upto date as applicable or latest w i t h latest amdt. or latest. The interlocking code f o r this unit shall be ""FGHKX"" .Inspection authority:- RDSO " | Numbers | 40.00 | 3,815 | 1,52,600 |
| 25 | "Q-Series Neutral Line Relay(QSPA1 Type), 24V DC,8F/4B along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-933A and RDSO Specn.No.IRS:S@45"44@S- 23 & S 60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be ""ABDEJ"". Inspection authority:- RDSO" | Numbers | 40.00 | 5,230 | 2,09,200 |
| 26 | Contactor Unit (QBCA 1 Type), 24 V DC, 2F(HD)/ 4B or 2F(HD)2F-4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 943 and RDSO Specn.No.IRS: 5-34 & S-23 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be "BCEJK" or "DEHJX". Inspection authority:- RDSO | Numbers | 30.00 | 6,842 | 2,05,260 |
| 27 | "Supply of 1 x 6 Sq.mm. (Red/Black/Green) multi strand copper power wire as per 18:6 94:20 10 or latest, 84 conductor each dia 0.30mm +/- 0.01 with insulation thickness of 0 .8 m m a n d n o m i n a l conductor resista nc e of 3.3 ohms/km and test parameters a s per RDSO Specn.No.IRS:8- 76/89(Amnd.3) or latest.Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO / RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board " | Metre | 1000.00 | 42 | 42,000 |
| 28 | Supply of 1 x 10 Sq.mm. {Red/Black/Green} multi strand copper power wire as per IS:694:20 10 or latest, 140 conductor each dia 0.30mm +/- 0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.91 ohms/km and test parameters as per RDSO S p e c n . N o . I R S : S - 7 6 / 8 9 ( A m n d . 3 ) or latest.Colour of the wire which is required will be specified b y the Engineer incharge. Inspection: (i) RDSO/ RITES if value of item in work m ore tha n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. | Metre | 1000.00 | 119 | 1,19,000 |
| 29 | Supp1y of 1 x 16 Sq.mm. {Red/Black/Green} multi strand copper power wire as per IS:694:20 10 or latest, 126 conductor each dia 0.40mm +/- 0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.21 ohms/ km and test parameters as per RDSO Specn. No.IRS: S-76/89(Amnd.3) or latest. Colour of the wire which is required will be s p e c i fi e d b y t h e Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs(ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. | Metre | 500.00 | 131 | 65,500 |
| 30 | Installation and wiring of relay rack as per DRG.NO.S&T/C-20/2001 with modification v i d e C S T E / E R ' S L E T T E R NO.SG.42/9, DT.15/3/2016. Supply and fixing of fuses with base, diodes; resistances; condensers, terminal strips / tag blocks, bus bars & other equipment's required for the approved system design complete with scaffolding materials & required hardware & erection materials to accommodate 100 relays (station wise quantity to be specified by the tenderer). PVC wire as per RDSO SPEC.IRS-5-76/89, AMD-2 or latest (for wiring of relay rack) shall be supplied by the contractor, duly inspected by RDSO. This includes supply of relay rack to accommodate 100 r e l a y s complete with fi t t i n g s a s per DRG.NO.S&T/C-20/2001. Note: - this includes status of relay to be indicated through led indication at the top of relay rack and in this connection all the required materials to be supplied by the contractor. Rack to be fixed on rubber pad. Supply. Inspection: (i) RITES if value of item in work more than 5 lakhs. (ii)Consignee if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. | Numbers | 2.00 | 25,535 | 51,070 |
| 31 | Installation and wiring of relay rack as per DRG.NO.S&T/C-20/2001 with modification v i d e C S T E / E R ' S L E T T E R NO.SG.42/9, DT.15/3/2016. Supply and fixing of fuses with base, diodes; resistances; condensers, terminal strips / tag blocks, bus bars & other equipment's required for the approved system design complete with scaffolding materials & required hardware & erection materials to accommodate 100 relays (station wise quantity to be specified by the tenderer). PVC wire as per RDSO SPEC.IRS-5-76/89, AMD-2 or latest (for wiring of relay rack) shall be supplied by the contractor, duly inspected by RDSO. This includes supply of relay rack to accommodate 100 r e l a y s complete with fi t t i n g s a s per DRG.NO.S&T/C-20/2001. Note: - this includes status of relay to be indicated through led indication at the top of relay rack and in this connection all the required materials to be supplied by the contractor. Rack to be fixed on rubber pad. Execution. | Numbers | 2.00 | 83,032 | 1,66,064 |
| 32 | Installation of cable termination rack with scaffolding materials ladder for supporting outdoor cable; wire guide complete with other necessary hardware as per requirements of rly. & erection materials. Wires to be procured from RDSO's approved firm only. This includes supply of cable termination rack as per DRG.NO. S&T/C- 17/2001 OR latest with screw less disconnect type connectors (Wago/ Phoenix/Similar) , scaffolding materials, ladder for supporting outdoor cable, wire guide, NDT fuse complete with other necessary hardware as per requirements of railway & erection materials. Supply. Inspection: (i) RITES if value of item in work more than 5 lakhs. (ii)Consignee if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. | Numbers | 2.00 | 44,924 | 89,848 |
| 33 | Installation of cable termination rack with scaffolding materials ladder for supporting outdoor cable; wire guide complete with other necessary hardware as per requirements of rly. & erection materials. Wires to be procured from RDSO's approved firm only. This includes supply of cable termination rack as per DRG.NO. S&T/C- 17/2001 OR latest with screw less disconnect type connectors (Wago/ Phoenix/Similar) , scaffolding materials, ladder for supporting outdoor cable, wire guide, NDT fuse complete with other necessary hardware as per requirements of railway & erection materials. Execution. | Numbers | 2.00 | 5,790 | 11,580 |
| 34 | Supply o f P B T A R A terminal as per IRS SPECN.NO. IRS: S-75-2006(REV-2) OR LATEST. Material to be procured from RDSO's approved fi r m only. Inspection: RDSO. 1 WAY,DRG NO.23741A, ALT-4. | Numbers | 100.00 | 78 | 7,800 |
| 35 | Supply o f P B T A R A terminal as per IRS SPECN.NO. IRS: S-75-2006(REV-2) OR LATEST. Material to be procured from RDSO's approved fi r m only. Inspection: RDSO. 6 WAY, DRG.NO. 23756,ALT-3. | Numbers | 200.00 | 485 | 97,000 |
| 36 | Supply of fuse block (PBT) to spec.no.IRS-5- 75/2006(REV-2) O R LATEST, DRG.NO.SA- 2 3 7 4 8 w i t h f u s e inserts cartridge, non- deteriorating type to spec.IRS-S-78/92 with latest amendment, to be mounted inside the location box on hylum sheet. Inspection: - RDSO. Fuse, non- deteriorating(2A/6A/10A/16A) type, cylindrical(IRS-S-78/92) [quantity as per site requirement] | Numbers | 100.00 | 61 | 6,100 |
| 37 | Supply of fuse block (PBT) to spec.no.IRS-5- 75/2006(REV-2) O R LATEST, DRG.NO.SA- 2 3 7 4 8 w i t h f u s e inserts cartridge, non- deteriorating type to spec.IRS-S-78/92 with latest amendment, to be mounted inside the location box on hylum sheet. Inspection: - RDSO. Fuse Base. | Numbers | 100.00 | 178 | 17,800 |
| 38 | "Supply of indicating type fuse inserts with holder (material will be supplied only from approved vendors of RDSO) as per IRS S:78/92 or Latest. Inspection: Consignee" 0.6 A | Numbers | 50.00 | 65 | 3,250 |
| 39 | Supp1y of indicating type fuse inserts without holder (material will be supplied only from approved vendors of RDSO) as per IRS S:78/92 o r Latest. Inspection: Consignee 0.6 A | Numbers | 50.00 | 21 | 1,050 |
| 40 | "Supply of Tag block 200 way/160 way with PVC covers as per (IRS: S-77/ 2006 (Rev.1) or latest & Drg.no.SA-2475 1 & 52. Requirement of each type shall be specified by Engineer-in- charge. NOTE: In case ABB type relays proposed to be used with 100- way block then Two 100-way Tag Block will be considered as one 200 way Tag Block. Inspection: (i) RDSO/ RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 2.00 | 1,500 | 3,000 |
| 41 | "Supply of PVC insulated Railway Signalling multi-core Indoor Cable 60 core (0.6mm dia) conforming to IRS:76/89(Amd3) or latest. Inspection: (i) RDSO/ RITES if value of item in work m o r e t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Kilometre | 1.00 | 1,51,032 | 1,51,032 |
| 42 | "Supply of PVC insulated Railway Signalling multi-core Indoor Cable 40 core (0.6 mm dia) conforming to IRS:76/89(Amd3) or latest. Inspection: (i) RDSO/RITES if value of item in work m o r e t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Kilometre | 1.00 | 1,12,572 | 1,12,572 |
| 43 | Termination of Outdoor Cables (Main Cables / tail cables) at both ends in location boxes, cable termination rack in relay room, station building, generator room etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The outdoor cable shall be terminated in Relay Room, DG Room, ASM Room etc under supervision and instructions issued by Engr. incharge of the work. Inspection: Consignee | Per Conductor | 10000.00 | 9 | 90,000 |
| 44 | Supply of Fuse terminal block with LED indication up to 2.5 sq.mm screw type one in one out (suitable for (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) as per RDSO/ SPN/189/2004 (without fuse). | Numbers | 200.00 | 189 | 37,800 |
| 45 | Supply of Fuse links of (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) | Numbers | 200.00 | 45 | 9,000 |
| 46 | Inter connection wiring with ladder arrangement from control panel to IPS to relay rack, battery & CTR. This includes interconnection, wiring with ladder arrangement between relay racks, CTRS, control cum indication panel and relay rack tag blocks for data logger. This also includes termination of cables / wires on all the above and dressing, bunching etc. As required at site. 16 sq. mm. cable to be used between IPS & it's battery duly soldered with good quality lugs in duplicate. From relay rack to panel wire should be of 40/60 core multicore cable of 1 sq.mm., 0.5mm dia., 16/0.2 mm for relays, 3/0.75 mm for MCBS and 10 sq.mm for power wiring. Indoor cable will be 60 x 1 mm /40 x 1 mm as per IRS-S-76/89, amd-2 or latest for interconnection. Supply of wires / cables by the contractor, shall be procured from RDSO's approved firm only & to be duly inspected. Note:1) necessary 40/60 multicore, 16/0.2 mm, 3.0.75 mm, 10 sq.mm cables required for wiring to be supplied by the contractor. 2)to suite load requirement necessary re- arrangement of DC-DC converters by OEM of IPS. Up to 6 Lines Station | Station | 2.00 | 1,31,515 | 2,63,030 |
| 47 | Supply, Installation and Commissioning of SMPS based Integrated power supply (IPS) system as per RDSO Spec. No. RDSO/SPN/165/2023 (Ver.4.0) with amendment-1 or latest if any and as per drawing attched in tender document (For 6L RE) in Annexure-O-5.1 along with 300AH Low maintenance lead acid cell (In PP-CP Container)(Warranty-04 Years) Inspection: RDSO | Numbers | 2.00 | 11,83,104 | 23,66,208 |
| 48 | Supply and erection of a mast / high mast suitable for franklin technology based lightning protection installation, mechanically robust good corrosion and fire resistance,5 mtr. (including 2 mtr FRP) long GI/MS painted along with guying kit foundation and other accessories required for installation of mast. Supply material inspection by consignee. | Numbers | 1.00 | 7,170 | 7,170 |
| 49 | Supply and laying of 70 sq.mm PVC insulated flexible tinned electrolytic copper down conductor placed in a metallic / PVC protective covering wherever exposed to human intervention including saddles and all accessories as required. Supply material inspection by consignee. | Metre | 50.00 | 1,362 | 68,100 |
| 50 | "Supply & laying of 25x3 mm pure electrolytic copper tape through suitable CLASS-'B' G I p i p e f o r loop Earthing and bonding as per site requirement. Supply material inspection by consignee. " | Metre | 35.00 | 1,425.7 | 49,899.5 |
| 51 | Installation of class A device on the top of the building: the device shall be installed at a height of about of about 3 mtrs. From the roof of the building using a GI mast. The device shall be connected to earth pit using the copper tape of 25 mm x 2 mm or better. This copper tape shall be run firmly along the side of the mast with help of spacers. It shall also be ensured that this down conductor shall not touch the building throughout. The down conductor should be c o n n e c t e d t o e a r t h e l e c t r o d e using exothermic welding or better. A counter shall be installed at a appropriate place to count number of occurrences. | Set | 1.00 | 18,244 | 18,244 |
| 52 | Supply of Point JB fitted with 18 nos. 1-way terminal block confirming to IRS-S-75/91 (AMD-2) OR LATEST, DRG. NO. SA-2374 1A with 3 no. of 40 mm bore G I PIPE 600 mm long as per DRG. NO. SGW/MGS/ PT4/91 fixed on hylum sheet with U channel (75x40x1500) mm for fixing ARA terminal to be procured from RDSO approved sources. Inspection- Consignee. | Numbers | 25.00 | 4,140 | 1,03,500 |
| 53 | Supply of Ground Connection [BG] Threaded Type for IRS type Point Machine, as per CWM/Signal Workshop /Howrah /E. Rly. drawing number, S1. No., Description of Drawing & CWM/SW /HWH's Drawing No. mentioned below: - 1. Detector Rod (Far End) - BS/29/721 with ALT-1 Detector Rod (Near End)- BS/29/722 with ALT-1. 2. Lock Rod (Far End) - BS/29/723 with ALT-1, Lock Rod (Near End) BS/29/724 with ALT-1. 3. Switch Extension Bracket - BS/29/725 with ALT-1. 4. Drive Rod - BS/29/726 with ALT- 1 Drive Lug- BS/29/726 A with ALT- 1. 5. Sleeve- BS/29/726 B with ALT-1. 6. Lug- BS/29/726 C with ALT-1. 7. Pin- BS/29/726 D with ALT-1. 8. Sketch showing the Layout arrangement- BS/29/727 with ALT-1. Amdt. and alt. up to date if any. Inspection: by RITES [for value of material above Rs. 5.0 lakhs. Inspection by Consignee for value of material below than Rs 5.0 lakh] Turn Out | Numbers | 15.00 | 6,716 | 1,00,740 |
| 54 | Supply of Ground Connection [BG] Threaded Type for IRS type Point Machine, as per CWM/Signal Workshop /Howrah /E. Rly. drawing number, S1. No., Description of Drawing & CWM/SW /HWH's Drawing No. mentioned below: - 1. Detector Rod (Far End) - BS/29/721 with ALT-1 Detector Rod (Near End)- BS/29/722 with ALT-1. 2. Lock Rod (Far End) - BS/29/723 with ALT-1, Lock Rod (Near End) BS/29/724 with ALT-1. 3. Switch Extension Bracket - BS/29/725 with ALT-1. 4. Drive Rod - BS/29/726 with ALT- 1 Drive Lug- BS/29/726 A with ALT- 1. 5. Sleeve- BS/29/726 B with ALT-1. 6. Lug- BS/29/726 C with ALT-1. 7. Pin- BS/29/726 D with ALT-1. 8. Sketch showing the Layout arrangement- BS/29/727 with ALT-1. Amdt. and alt. up to date if any. Inspection: by RITES [for value of material above Rs. 5.0 lakhs. Inspection by Consignee for value of material below than Rs 5.0 lakh] Single Slip as per DRG No.S-3153 or Latest | Numbers | 10.00 | 8,473 | 84,730 |
| 55 | Supply o f Electric Point Machine-IRS type, (AC Immunity 160V AC), Non-Trailable to operate on 110V DC complete with Lock and Detector slides, Cable Termination Box (l43mm throw, thrust as applicable, Rotary locking), confirming to IRS: S 24/2002 (amdt.1) (Amdt. up to date if any) & Assy. Drg. No. RDSO- S/10910 (alt. up to date if any) & IRS: S 37/82 (amdt.3) (Amdt. up to date if any) for Motor. (items to be procured through stores) Inspection: RDSO | Numbers | 20.00 | 65,619 | 13,12,380 |
| 56 | Installation of electric point machines on MS plate fixed on wooden/ concrete sleepers complete with fixing of junction boxes, ground connections including smithy works involved, insulation of MS plate on which the point machine is to be fixed from the gauge tie plate involving riveting/welding of angle cleats, installation of point JB, termination adjustment for operation of points by crank handle, painting and lettering as required including wiring, testing and commissioning. Note: MS plate/flat/angle /angle cleats, paints, bolts & nuts and washers of sizes as required for fixing the point machine shall be supplied by the contractor except point machine. | Numbers | 25.00 | 10,407 | 2,60,175 |
| 57 | "Point insulation Complete set as per RDSO/ SPN/168/2005 for 1.Switch bracket 'D' bracket insulation for IRS point machine - One set comprises of (a)Side plate LH to Drg. No.S-3266 - 1 No. (b)Side plate RH to Drg.No.S-3265 - 1 No. (c)Insulating bush to Drg.No.S-3199 - 4 Nos. (d) Insulating washer to Drg.No.S-8640 - 4 Nos., 2. Split- Stretcher bar 2.1 Insulation for Leading stretcher bars(BG) each set comprising of (a) Insulating plate for leading insulated stretcher bars BG as per RDSO Drg.No.T- 10384 - 2 Nos. (b) Insulating bushing for leading insulated stretcher bars for BG as per RDSO Drg.No.T-10535- 4 Nos. (c) Insulating Washer for insulated stretcher bar BG as per RDSO drg.No.T-10371 - 6 Nos. 2.2 Insulation for following stretcher bars BG. Each set comprising of: (a) Insulating side plate for insulated stretcher bars BG as per RDSO Drg.No.T-10367 - 3 No. (b) Insulating bushing for insulated stretcher bars BG as per RDSO Drg.No..T- 10368 - 6 Nos. (c)Insu1ating washer for insulated stretcher bars BG as per RDSO Drg.No.T10371 - 12 Nos& 3. Gauge tie plates (52 Kg/60Kg as per site requirement) Insulation for (BG) complete with insulating bush and washer each set comprising of: (a) Insulating plate for insulated tie plate BG as per RDSO Drg.No.T-10372-1 No. (b) Insulating bushing for insulated stretcher bar BG as per RDSO Drg.No.T10368 - 3 Nos. (c) Insulating Washer for insulated stretcher bar BG to IRS 40/84 as per RDSO drg.No.T- 10371 - 6 Nos. Inspection: (i) RDSO/ RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Set | 25.00 | 1,232 | 30,800 |
| 58 | "Gauge Tie plate insulation as per RDSO/ SPN/168/2005 as per RDSO drg. No: T- 10372Alt2, T- 10368, T- 10371A1t2, T- 15083/88/Alt2 & T-11690/Alt2 and as per RDSO/ SPN/168/2005 with latest amendments as applicable. Gauge tie plates (52 Kg/60Kg as per site requirement) Insulation for (BG) complete with insulating bush and washer each set comprising of: (a) Insulating plate for insulated tie plate BG as per RDSO Drg.No.T-10372-1 No. (b) Insulating bushing for insulated stretcher bar BG as per RDSO Drg.No.T10368 - 3 Nos. (c) Insulating Washer for insulated stretcher bar BG to IRS 40/84 as per RDSO drg.No.T- 10371 - 6 Nos. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Set | 25.00 | 365 | 9,125 |
| 59 | Dismantling of existing point fittings, drilling of holes in stock rail/tongue rail/ gauge tie plate, re arrangement and refixing of existing electrical detector and installation of IRS 24/2002 with latest Amdt. point machine on MS plate fixed on wooden/concrete sleepers complete with fixing of point JB ground connections including smithy job for welding & termination & wiring of point machine, adjustment and testing as per technical specification and dismantling of all new fittings excluding point machine and marking with paint for future and transportation up to railway's store | Set | 25.00 | 8,295 | 2,07,375 |
| 60 | "Installation, wiring and testing of electrical key transmitter for crank handle arrangement, siding control as per yard diagram, approved circuit diagram. Installation portion shall include supply of necessary angles, wooden shelf, nuts & bolts as required for the work. The ward no. Of key shall be advised by the site engineer. This includes supply of electrical key transmitter with key for crank handle interlocking arrangement siding control as per yard diagram, approved circuit diagram and specn.no. IRS-S- 21/01(LATEST) AND IRS-S-23(LATEST),DRG.NO.SA- 22601 (ADV)ALT. 2. [key combination will be intimated by site engineer]" Supply. Inspection : RDSO. | Numbers | 10.00 | 7,345 | 73,450 |
| 61 | "Installation, wiring and testing of electrical key transmitter for crank handle arrangement, siding control as per yard diagram, approved circuit diagram. Installation portion shall include supply of necessary angles, wooden shelf, nuts & bolts as required for the work. The ward no. Of key shall be advised by the site engineer. This includes supply of electrical key transmitter with key for crank handle interlocking arrangement siding control as per yard diagram, approved circuit diagram and specn.no. IRS-S- 21/01(LATEST) AND IRS-S-23(LATEST),DRG.NO.SA- 22601 (ADV)ALT. 2. [key combination will be intimated by site engineer]" Execution. | Numbers | 10.00 | 6,796 | 67,960 |
| 62 | Supply, Transportation, Installation, Testing and Commissioning of Multi Section Digital Axle Counter (MSDAC) for mentioned detection Point by the purchaser & Track Section as per SIP uploaded with the tender, complete with all accessories, cable required with each track device & Card viz., Axle Detectors, Track Side Electronics/ DAC field units, Central Evaluator (Central Evaluator unit should be housed in a pre- fabricated Rack to be supplied along with the system), Reset unit, Relay unit, Event logger & Diagnostic terminals etc. required for different Detection Points & Track Sections as per RDSO Specification No. RDSO/SPN/176/2013, Ver.3 or latest as per Annexure-070801(A, B & C.) | Per Detection Point (DP) | 60.00 | 3,42,558 | 2,05,53,480 |
| 63 | "Supply & installation o f polymer positive t e m p e r a t u r e c o e ffi c i e n t d e v i c e (PPTC) resettable fu ses , for outdoor circuits. 30V/2.5A f o r track feed and 60V/ l. lA in place of 24V /2A fuse and 120V/ 1. lA for signal lighting. Make- RAYCHE M, BOURNS , LITTLE FUS E, FUZETEC o r TYCO. Quantity as per site engineer. Note- PPTC fuses are to be connected with crimped ring type lugs. "". Inspection : Consignee. " | Numbers | 50.00 | 79 | 3,950 |
| 64 | "Supply & installation of 'C' class surge protection arrangement at feed e n d DC Track Ckt Specn no. As follows: - voltage 230 V AC rated voltage 350V AC DIS. CAP lOKA TO 20 KA TIME 100 MILi second protection 1.2V degree protection IP.20 TEC-61643-1. Inspection : by consignee. " | Numbers | 50.00 | 1,346 | 67,300 |
| 65 | Earthing of EI equipment, relay rack and power equipment etc. to be done along with the supply of all requisite materials, Earthing shall be in the form of Ring Earth conforming to RDSO spec RDSO/SPN/197 Ver.1.0 o r L a t e s t ( w i t h a minimum 10 maintenance free earth electrodes) and as per CSTE/ER/Kolkata's technical circular No.92, using copper rings with earth resistance less tha n 1 ohm . T h e earthing shall be maintenance free. T h e ring earth shall be connected to copper flat of size 25x3 mm in the relay room and IPS room. The copper flat fixed on the wall to the entire breadth of Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B ,C & D class protection shall be provided for all EI equipment lnspection Consignee: | Station | 1.00 | 2,35,844 | 2,35,844 |
| 66 | "Supply of LED eignal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. R D S O / S P N / 199/2010(Rev.1) or latest. {items to be procured through Store} Inspection: RDSO" RED Aspect | Numbers | 25.00 | 8,362 | 2,09,050 |
| 67 | "Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. R D S O / S P N / 199/2010(Rev.1) or latest. {items to be procured through Store} Inspection: RDSO" YELLOW Aspect | Numbers | 50.00 | 8,387 | 4,19,350 |
| 68 | "Supply of LED eignal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. R D S O / S P N / 199/2010(Rev.1) or latest. {items to be procured through Store} Inspection: RDSO" GREEN Aspect | Numbers | 25.00 | 9,438 | 2,35,950 |
| 69 | "Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest.{items to be procured through stores) Inspection: RDSO" LED for Route Aspect | Numbers | 80.00 | 5,478 | 4,38,240 |
| 70 | "Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest.{items to be procured through stores) Inspection: RDSO" LED for Shunt Signal Aspect | Numbers | 20.00 | 5,675 | 1,13,500 |
| 71 | "Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. RDSO /SPN/153/2011 (Rev.4.1) or latest.{items to be procured through stores) Inspection: RDSO" LED for Calling ON Signa1 Aspect | Numbers | 5.00 | 6,830 | 34,150 |
| 72 | "Supply of colour light signal post 5.6 mtr and ladder 5.5 mtr with bases for ladder & post as per RDSO SPEC. NO. IRS:S-6-81 (or latest) and DRG. NO. SA-23156 (ADV), ALT- 1 (OR LATEST). CLS base as per DRG. NO. S-2011/M (OR LATEST). Note: - this includes signal post, base, ladder, ladder base, platform, rail guard & blanking off. Materials to be procured only from RDSO approved list of firms for manufacture & supply of mechanical signalling items. Inspection: (i)RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 5.00 | 15,707 | 78,535 |
| 73 | "Installation, erection and paying out of tail cable from location box and wiring of shunt signal, LED unit on the same post below the main signal as per technical specification. This includes supply of position light shunt signal unit without lenses, lamps, base, post and without signal transformer as per RDSO DRG NO. SA-23840/ADV/ALT-2. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note- Signal unit should be compatible to 'LED' type." "Supply. Inspection: (i)RDSO/RITES if value of item in w o r k m o r e t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 3.00 | 5,544 | 16,632 |
| 74 | "Installation, erection and paying out of tail cable from location box and wiring of shunt signal, LED unit on the same post below the main signal as per technical specification. This includes supply of position light shunt signal unit without lenses, lamps, base, post and without signal transformer as per RDSO DRG NO. SA-23840/ADV/ALT-2. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note- Signal unit should be compatible to 'LED' type." Execution | Numbers | 3.00 | 505 | 1,515 |
| 75 | "Supply of Calling ON/ Guard Repeater Signal Unit with Brackets & Fixing accessories. Calling ON/ Guard Repeater Signal Unit shall conform to RDSO Drg no 24351(Adv) A1t1 suitable to LED Signal Lighting Unit. Inspection: (i)RDSO /RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 20.00 | 2,533 | 50,660 |
| 76 | Supply of A -sign / AG - LED Signal Lighting Unit retrofittable i n existing C L S housing and compatible with AC LED ECR (As per spec. RDSO/SPN/199/2010 Rev 1.1 or Latest with Brackets & Fixing accessories. Inspection: Consignee | Numbers | 20.00 | 2,601 | 52,020 |
| 77 | Fixing of Calling-on Signal/A-Sign/AG-Sign unit on signal post including Guard Repeater Signal. The item includes fixing of Co- On signal /'A' sign/ 'AG' sign unit on signal post with bracket, hood etc. Item includes supply of bracket & fixing materials etc. by the contactor. The item also includes termination of cables & wiring inside Co- On signal /'A' sign/ 'AG' sign unit as per standard practice. Inspection: Consignee. | Numbers | 20.00 | 2,331 | 46,620 |
| 78 | Supply and fixing of protective screen of expanded metal 12 SWG of size 1200 x 1500 mm on signals as per std. practice in RE Area. Inspection: Consignee. | Numbers | 18.00 | 3,502 | 63,036 |
| 79 | Supply and installation of P/ C / G/ A/ AG marker (size 250mm dia circle) high intensity prismatic(TYPE-IV) retro reflective sheet over 2 mm thick aluminium sheet & letter will be screen printing (250 m m dia circle) a s per drg. S&T/SDAH /SK-1383 and technical specification attached. This will include cost of all materials including fixing clamp required for this work. Inspection: - inspection by rites [for value of material above Rs. 5.0 lakhs.]. Inspection by consignee [for value of material below than Rs 5.0 lakh] | Numbers | 20.00 | 550 | 11,000 |
| 80 | "Supply, Fabrication and Fixing of Retro reflective Nomenclature Board of size 254 mm x 358 mm made of 2mm thick aluminium sheet & high intensity prismatic (hip) grade retro reflective sheet (TYPE -IV) including fixing arrangement for fixing them on existing post per DRG. NO. S&T/SDAH /SK-1386 and as per standard practice. Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 25.00 | 373 | 9,325 |
| 81 | Supply of offset bracket for position light shunt signal (90mm outside Dia.) post with U clamps, nuts, washers complete a s per R D S O DRG. NO.SA-23080/ADV/ALT-1 all drawings should be as per latest. Inspection: by consignee | Numbers | 5.00 | 2,041 | 10,205 |
| 82 | "Supply of cast iron offset bracket for Main Signal with U clamps, nuts, washers complete DRG. NO. SA-23080/ADV/ALT-1. RDSO SPEC. NO. IRS-5- 10/78. Inspection: consignee. Note : Offset bracket has to be connected wherever necessary as per site engineer." | Numbers | 8.00 | 2,513 | 20,104 |
| 83 | Casting, concreting & curing of foundation for Main signal including cost of all materials required for casting and concreting. All materials required for execution will be supplied by the contractor including cement, sand & stone chips as per DRG. NO. S&T/C-42(NKG). | Numbers | 25.00 | 8,065 | 2,01,625 |
| 84 | Dismantling of existing main signal including dependent shunt signal, calling on signal if any, fitted on the same post along with signal post, signal unit, ci base without damaging any part. | Numbers | 20.00 | 1,218 | 24,360 |
| 85 | Dismantling of existing Signal Foundation (upto ground level by hydraulic breaker). | Numbers | 20.00 | 2,212 | 44,240 |
| 86 | "Supply, Installation, Testing & Commissioning of Microprocessor based Networkable Analogue Addressable up to 64 nodes 1 Loop Fire Alarm Control panel with LCD display, the panel should be equipped with sufficient No. of loop as per RDSO Specification No. RDSO/SPN/217/2018 ver 2.0 or latest. Each loop shall have capacity of 127 analogue addressable devices in 1 loop, the panel shall have sufficient No. of programmable relay control for controlling AHU's, pressurisation fans, ventilation fans at fire pump room, monitoring of fire sprinkler & sealed lead acid batteries sufficient for 24 Hours normal working & then capable of operating the system for 24 Hours during Emergency conditions as required. The panel shall have provision of connectivity of BACNET/ MODBUS / LONWOK/TCP- IP. The panel shall have dedicated RS232 serial port for direct PC or MODEM connection, optional remote printer a s p e r RDSO Specification No. RDSO/SPN/217/2018 ver 2.0 or latest Inspection: RDSO" | Numbers | 1.00 | 62,379 | 62,379 |
| 87 | Supply, Installation, Testing & Commissioning of Probe type bimetallic Heat Sensor/ Fixed cum ROR 90 degree with required module to be communicated with main fire Alarm Panel as per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver 3.0 or latest Inspection: RDSO | Numbers | 10.00 | 6,946 | 69,460 |
| 88 | Supply, Installation, Testing & Commissioning of intelligent Analogue Addressable Multi-Sensor type smoke detector with inbuilt fault isolator and integral response indicator with 360 degree viewing angle. Detector shall communicate 3 danger levels for differentiated alarm activation and high tolerance to dust, dirt, temperature fluctuations and air current. Detector should have unique address for communication and assigned through panel with mounting base as required with the protection category of IP 40. All items as per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver 3.0 or latest. Inspection: RDSO | Numbers | 25.00 | 3,122 | 78,050 |
| 89 | Supply, Installation, Testing & Commissioning of Analogue Addressable Manual Call Point with integral short circuit isolator, Analogue addressable protocol having status LED for alarming & standby m o d e , electronically addressed) a s per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver 3.0 or latest. Inspection: RDSO | Numbers | 3.00 | 3,750 | 11,250 |
| 90 | Supply, Installation, Testing & Commissioning of Linear Heat Sensing (LHS) cable as per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver 3.0 or latest. Inspection: RDSO | Metre | 50.00 | 830 | 41,500 |
| 91 | Supply, Installation, Testing & Commissioning of LHS interface module as per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver. 3.0 or latest. Inspection: RDSO | Numbers | 1.00 | 44,260 | 44,260 |
| 92 | Supply, Installation, Testing & Commissioning of Air Sampling Type detector shall use LASER type. This type of detector shall use piping or tubing distribution network that shall run from the detector to the area as to be protected. It should be supplied with required module & Power supply unit complete as a system with all accessories like pipes, Sampling points etc. as per RDSO Specification No. RDSO/ SPN/ 2 1 7 / 2 0 2 1 v e r 3 . 0 o r latest Inspection: RDSO | Set | 1.00 | 1,89,017 | 1,89,017 |
| 93 | Supply, Installation, Testing & Commissioning of intelligent Addressable Loop Powered Sounder cum beacon with base inbuilt fault isolator with protection category of IP42 and duly approved as per RDSO Specification No. RDSO/ SPN/ 217/ 2021 ver 3.0 or latest. Inspection: RDSO | Numbers | 1.00 | 8,275 | 8,275 |
| 94 | Supply, Installation, Testing & Commissioning of FRLS unarmoured/ armoured cable(2Cx1.5 sq.mm) with all accessories for connection of all Fire Alarm devices as per RDSO Specification No. RDSO/ SPN/ 217/ 2 0 2 1 v e r 3 . 0 o r latest Inspection: RDSO | Metre | 100.00 | 113 | 11,300 |
| 95 | "Supply of CO2 type fire extinguisher capacity 4.5 Kg capacity ISI Mark IS: 15683 operating temperature (- 30)° to (50)° for class 13 B type of fire with 1 mtr. Hose pipe fitted with PVC bend horn complete in all respect. Inspection: (i) RITES if value of item in work more than 5 lakhs o r a s per e x t a n t policy (ii) Consignee if value of whole item in work less than 5 lakhs or as per extant policy" | Numbers | 4.00 | 5,176 | 20,704 |
| 96 | Supply of full size apparatus case (GKP type) (as per DRAWING NO. SW SK NO. 4/90 & & other applicable GKP SW Drawing). This includes supply of location box (GKP type) with 'E' type lock & key, fitted on location door on both side, E Type lock (ward No will be specified by Engineer-in Charge) as per RDSO Drg. No. SA 3376 and Key to Drg. No. 3377 as per RDSO drawing No. RDSO/S- 11500. Inspection: (i) RITES if value of item in work more than 5 lakhs or as per extant policy (ii) Consignee subject to procurement from RECOMMENDED LIST O F FIRMS FOR MECHANICAL SIGNALLING ITEMS if value of whole item in work less than 5 lakhs or as per extant policy | Numbers | 80.00 | 13,916 | 11,13,280 |
| 97 | Casting, concreting and curing of concrete foundation ((in ratio 1:3:6), erection and installation of full size apparatus case (GKP type)/Stainless Steel (SS) Apparatus Case as per DRG.NO. S&T/C-6/98(NKG) with 'E' type lock on CC foundation. This includes cost of all materials required for fixing holding down bolts, casting, concreting. Note: - bolts, nuts and washers, bitumen compound to be supplied by contractor and bitumen compound to be used in between apparatus case and foundation as per site engineer. This also includes bottom of apparatus cases filled with sand and the outside covered with masonry work and neat cement plastering. Note: - Location boxes to painted with anti- corrosive paints as per IS:- 9862-1981, one and half feet from the bottom, on all surfaces- both inside and outside. Inspection: Consignee | Numbers | 80.00 | 3,532 | 2,82,560 |
| 98 | Fixing by slotted angle, wiring of terminal strips, hylam strip, relays, fuses with base, fixing of hard wood shelves for full size apparatus case with termination & Earthing of cables and wiring with lettering as required including supply of slotted angles, wires, ferrules for marking and miscellaneous materials per location to be supplied by contractor. (all materials except relay, terminal strips, Bakelite strip, fuses with base and hard wood shelves to be supplied by the contractor). Wires to be used for this purpose should be procured from RDSO'S approved firm and to be inspected by RDSO. [Quantity of wires to be specified by contractor]. NB- power cable to be terminated with proper lugs and required buss bar and other terminals to be supplied by the contractor. Inspection: Consignee | Numbers | 80.00 | 4,830 | 3,86,400 |
| 99 | "Supply of half size apparatus case (GKP type) (As p e r G K P T Y P E DRAWING NO.SE/FE/2004/ 21 & other applicable GKP SW Drawing). This includes supply of location box (GKP type) with 'E' type lock & key, fitted on location door on both side, E Type lock (ward No will be specified by Engineer-in Charge) as per RDSO Drg. No. SA 3376 and Key to Drg. No. 3377 as per RDSO drawing No. RDSO/S-11500. Inspection: (i) RITES if value of item in work more than 5 lakhs or as per extant policy (ii) Consignee subject to procurement from R E C O M M E N D E D L I S T O F F I R M S FOR MECHANICAL SIGNALLING ITEMS if value of whole item in work less than 5 lakhs or as per extant policy." | Numbers | 20.00 | 7,860 | 1,57,200 |
| 100 | Casting, concreting and curing of concrete foundation (in ratio 1:3:6), erection and installation of half size apparatus case (GKP type) Apparatus Case as per DRG.NO. RE/S&T/SIG/TENDER/ SK/8/85 with 'E' type lock on CC foundation. This includes cost of all materials required for fixing holding down bolts, casting, concreting. Note: - bolts, nuts and washers, bitumen compound to be supplied by contractor and bitumen compound to be used in between apparatus case and foundation as per site engineer. This also includes bottom of apparatus cases filled with sand and the outside covered with masonry work and neat cement plastering. Note: - Location boxes to painted with anti- corrosive paints as per IS:- 9862-1981, one and half feet from the bottom, on all surfaces- both inside and outside. Inspection: Consignee. | Numbers | 20.00 | 3,105 | 62,100 |
| 101 | Fixing, wiring of terminal strips, hylam strip, relays, fuses with base and supply and fixing of shelves for half apparatus case with termination earthing of cables and wiring with lettering as required including supply of slotted angles, wires, ferrules for marking and miscellaneous materials per location to be supplied by contractor. (all materials except relay, terminal strips, Bakelite strip, fuses with base and hard wood shelves to be supplied by the contractor). Wires to be used for this purpose should be procured from RDSO's approved firm and to be inspected by RDSO. [quantity of wires to be specified by contractor]. NB- power cable to be terminated with proper lugs and required buss bar and other terminals to be supplied by the contractor. Inspection: Consignee | Numbers | 20.00 | 3,536 | 70,720 |
| 102 | Supply of hard wood shelves thickness 25 mm for keeping equipment's and batteries in the location box (FULL or HALF GKP /other type) with suitable varnish and anti- termite chemicals fitted on angles with nuts & bolts. Inspection: -Consignee (note- balance quantity may be taken from rly store if available) . 950 x 400 x 25 MM for full size location box . | Numbers | 50.00 | 563 | 28,150 |
| 103 | Supply of hard wood shelves thickness 25 mm for keeping equipment's and batteries in the location box (FULL or HALF GKP /other type) with suitable varnish and anti- termite chemicals fitted on angles with nuts & bolts. Inspection: -Consignee (note- balance quantity may be taken from rly store if available) . 450 x 400 x 25 MM for half size location box . | Numbers | 20.00 | 450 | 9,000 |
| 104 | Supply of paper base hylam sheet 12 mm thick. Inspection: consignee. | Sqm | 75.00 | 5,370 | 4,02,750 |
| 105 | Alteration/modification i n t h e existing location boxes (full size), fixing of equipment's, cable insertion, termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiring diagrams. This includes filling with sand and plastering the same. | Numbers | 10.00 | 2,782 | 27,820 |
| 106 | Dismantling of location box / RCC Goomty including all its accessories & concrete foundation. | Numbers | 80.00 | 651 | 52,080 |
| 107 | Shifting/lifting of location box to facilitate earthwork of Engg/Con.This includes filling with sand and plastering inside location box. | Numbers | 10.00 | 2,759 | 27,590 |
| 108 | "Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974) of Apparatus Case Full Size. (Outside & inside)" | Numbers | 100.00 | 260 | 26,000 |
| 109 | Laying & Fixing of Medium class GI pipe 50/ 100 mm dia {4.5 mm thickness} as per IS 1239 {Part 1}: 2004 with socket & coupling on culverts bridges or at any other locations as decided by Site Engineer. It includes installation of all material required for fixing arrangement. Contractor will install flexible/corrugated HDPE pipe at the end of GI pipe along with any masonry work(if required) to protect the cables from sharp edges and sudden bends. | Metre | 200.00 | 98 | 19,600 |
| 110 | Supply of Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/ 2012 revision 3 With latest Amdt. | Numbers | 10.00 | 2,185 | 21,850 |
| 111 | Jointing of 4 / 6 quad /Signaling cable with Heat Shrinkable straight through Jointing Kit. All the material required for the work are to be arranged by contractor himself at his own cost except Thermo shrinkable Joint Kit/Rapid Joint kit. After joining the cable through test such as insulation test, continuity cable losses etc. to be carried out jointly with Railway Engineer. If any defect or any damage is observed during jointing, the contactor has to redo the joint free of cost. | Numbers | 10.00 | 956 | 9,560 |
| 112 | Transportation of HDT machine with accessories including handling of stores materials, preparation of sites and boring for placing of 110 mm dia HDPE PIPE for crossing o f S&T cables together a bridges/ culvers, pucca road/crossing, boring trench shall be minimum 3 (three) meter below the river bed and 1(one) meter below the track/road/pucca road crossing area. This includes supply of accessories for HDPE pipes, including, cost of fuel and all other items etc. which will be required for laying of cable through i t . t h e w o r k s h a l l be e x e c u t e d a s per instruction o f site engineer.HDPE P I P E T O BE SUPPLIED AS PER RDSO SPEC. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Boring up to the length of 150 meters. Preparation of site for Horizontal Boring shall be carried out in presence of Railway Representative. | Metre | 1000.00 | 1,804 | 18,04,000 |
| 113 | Transportation of HDT machine with accessories including handling of stores materials, preparation of sites and boring for placing of 110 mm dia HDPE PIPE for crossing o f S&T cables together a bridges/ culvers, pucca road/crossing, boring trench shall be minimum 3 (three) meter below the river bed and 1(one) meter below the track/road/pucca road crossing area. This includes supply of accessories for HDPE pipes, including, cost of fuel and all other items etc. which will be required for laying of cable through i t . t h e w o r k s h a l l be e x e c u t e d a s per instruction o f site engineer.HDPE P I P E T O BE SUPPLIED AS PER RDSO SPEC. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. "Boring above the length of 150 meters. Preparation of site for Horizontal Boring shall " | Metre | 1000.00 | 2,419.95 | 24,19,950 |
| 114 | "Laying of 6 quad/Signalling cable/Power Cable with nylon rope through 110 mm HDPE pipe and back filling of boring pit. " | Metre | 6000.00 | 8.05 | 48,300 |
| 115 | Placing of DWC HDPE/RCC/GI pipes along with collars in trenches at places near track and road, crossings, platform cuttings etc. | Running Metre | 1000.00 | 30.73 | 30,730 |
| 116 | Rapair of pucca roads to original state in level crossing area after cable laying. | Metre | 100.00 | 256 | 25,600 |
| 117 | Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each Gantry Post/hectometre post.(Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. | Running Metre | 40000.00 | 5 | 2,00,000 |
| 118 | "CEMENT CONCRETE WORK FOR MISCELLANEOUS ITEMS IN THE RATIO 1: 3: 6. ITEM INCLUDES EXCAVATION, RAMMING, CURING AND PLASTERING WITH CEMENT & SAND MIXTURE (AGGREGATE NOT EXCEEDING 3.8 CM.) (AGGREGATE CEMENT & SAND TO BE SUPPLIED BY THE CONTRACTOR). WHEREVER DEPTH OF0.5 M CABLE TRENCH IS NOT FEASIBLE, CABLE SHALL BE PROTECTED AS :- PREPARATION OF CEMENT MIXTURE 1:3:6 WITH CONTRA CTOR'S OWN MATERIALS AND SPREADING CEMENT CONCRETE MIXTURE LAYER OF 100 MM THICK OVER THE ALREADY LAID CABLES IN THE EXCAVATED TRENCH" | cum | 300.00 | 3,767.59 | 11,30,277 |
| 119 | Supply Wiring, installation, testing and commissioning of Earth Leakage Detector (12 nos. channel) as per RDSO specification no. RDSO/SPN/256/2002 or latest having 6- digit counter, 12 Channel bus bar voltage of 110V AC/DC and/or 60V/24V/12V DC measurement in 19" sub rack along with insulation resistance meter, remote indication & buzzer in ASM room at station. The tenderer should submit three years' warranty certificate along with supply of material. This includes supply of fuse terminal strip for incoming power supply wires. On job training at site will be given by OEM engineer for installation and maintenance of ELD. Inspection by RDSO. | Numbers | 2.00 | 1,67,829 | 3,35,658 |
| 120 | "Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. It consist o f following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate e a r t h r o d - 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of l50x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate. (minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 1 0 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments t o SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO" | Lot | 40.00 | 15,147 | 6,05,880 |
| 121 | "Installation of Unit Maintenance Free Earth as supplied i n above item. I t includes ( i ) Digging the earth to the required depth. (ii) Insertion o f electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and bus bars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness o f 250 microns t o made requirement of under writer's laboratories (UL) 467-2007 o r latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential bus bar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential bus bar in relay room, power room a n d panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover t h e earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest.Inspection: Consignee" | Set | 40.00 | 6,579 | 2,63,160 |
| 122 | Supply of earth electrode mild steel galvanized, light class, IS:1239(PART-I)- 1979.earth electrode pipe should be with 3 mm thick, 50 mm dia and perforated(staggered),5 mm dia holes, 2 nos per 305 mm length with clamp of MS FLAT (galvanized) of size 35 mm x 6 mm (SPEC.NO.226 STD). Earth pipe should include CI threaded cap. Materials to be procured and designed as per CSTE/ER'S DRG.NO.SI/TYP/0097 dated 25.03.2025. Inspection: - BY RITES [for value of material above Rs. 5.0 lakhs.]. Inspection by consignee [for value of material below than Rs 5.0 lakh] | Numbers | 50.00 | 1,496 | 74,800 |
| 123 | Supply of MS FLAT (SPEC. NO. 226 STD or latest) of size 35 mm x 6 mm with length 5 mtr with holes of 12 mm dia at both ends as per CSTE/ER'S DRG. NO. S&T-1/2007 (or latest). Inspection : by consignee. | Numbers | 50.00 | 911 | 45,550 |
| 124 | Fixing of earth electrode including laying and installation of MS flat of size 35 mm x 6 mm with length 5 mtr or as per extant practice of Eastern Railway. As per CSTE/ ER'S DRG. NO. S&T 1/2007 for apparatus cases, signal post & other equipment as per instruction of site engineer. Provision for fixing M S fl a t a t apparatus cases/ signal post/other equipment should be made by the firm at site. Full threaded bolts of 10 mm dia and length 40 mm should be welded in the apparatus cases in such way that the MS flat at apparatus case end can be fixed from outside or from inside. Welding arrangement with accessories and welding materials should be arranged by the contractor for fixing of bolts at equipment end where required as per instruction of site engineer. All hardware and other miscellaneous materials required for installation to be supplied by the contractor except earth electrodes and MS flat. Note:-all materials required to be arranged by the contractor except 2 core cable will be supplied by the railway. | Numbers | 50.00 | 1,161 | 58,050 |
| 125 | Provision of cement concrete enclosure for earth electrodes as per DRG. NO. S&T/C- 36(NKG). This includes supply of all materials by the contractor duly inspected by consignee. | Numbers | 50.00 | 571 | 28,550 |
| 126 | Supply of Yellow Retro reflective sheet for LC Boom prismatic grade reflective sheets of size 305 x 290 mm o n e s e t consist 18 pieces. Inspection: Consignee | Set | 1.00 | 1,708 | 1,708 |
| 127 | Painting two coats of enamel paint over one coat of Red Oxide primer on the following items after scrapping and cleaning of the surface wherever necessary. Primer and Paints both of any reputed make are to be supplied by Contractor. The work shall be done as per instructions of rly engineer at site and extant practice on E Rly on location boxes, signal p o s t s , T L J B . T h i s includes lettering/ Numbering of signals, TLJB & Block joints if any, apparatus Cases, gate booms , etc , Description writing , legibly and neatly inside location boxes , relay hut, gate lodge etc. - for LC Gate. Inspection: by Consignee. | Lot | 1.00 | 6,538 | 6,538 |
| 128 | "Installation of magneto / control telephone, annunciator with all accessories and dry cells (2 nos.) For each phone with wooden b a t t e r y box. This includes supply of magneto telephones with all accessories including supply of 2 nos . Dry cell for each telephone with wooden battery box. (i) S P E C . F O R m a g n e t o telephone IRS-TC- 79/2000.AMD-l OR LATEST " (A) EXECUTION | Numbers | 5.00 | 195 | 975 |
| 129 | "Installation of magneto / control telephone, annunciator with all accessories and dry cells (2 nos.) For each phone with wooden b a t t e r y box. This includes supply of magneto telephones with all accessories including supply of 2 nos . Dry cell for each telephone with wooden battery box. (i) S P E C . F O R m a g n e t o telephone IRS-TC- 79/2000.AMD-l OR LATEST (B) "Supply of magneto telephone, desk type, spec. No IRS-TC-79/2000 AMDT. 1 or latest. Inspection: by consignee " | Numbers | 5.00 | 3,509 | 17,545 |
| 130 | Supply of Universal 2/4 wire way side DTMF control telephone as per RDSO spec. no. IRS: TC:82: 2005 (with Amdt. 3) or latest. Inspection: Consignee | Numbers | 15.00 | 5,203 | 78,045 |
| 131 | Supply of power supply unit for telecom installation at way side station suitable to operate max 6 equipments of DTMF type (12V/7AH) battery with suitable battery charger) as per RDSO spec. No. IRS: TC-72- 97 or latest. Inspection: consignee. | Numbers | 5.00 | 3,740 | 18,700 |
| 132 | Supply of 4W way station DTMF equipment as per RDSO spec. no IRS- TC / 60 / 93or latest (with 4 wire telephone as per spec. No IRS- TC - 38 / 97 or latest. Make- Bentron, Epsilon or similar and supply of 12V/7AH power supply unit for control phone. Inspection by Consignee | Numbers | 15.00 | 6,710 | 1,00,650 |
| 133 | Installation of 4W way station DTMF equipment as per RDSO spec. no IRS-TC / 60 /93 or latest( with 4 wire telephone as per spec. No IRS-TC- 38/97 or latest. Make- Bentron, Epsilon or similar and supply of 12V/7AH power supply unit for control phone. | Numbers | 15.00 | 1,257 | 18,855 |
| 134 | Supply of PVC cable channel of 25 MM x 25 M M a s p e r specification. Inspection: consignee. | Metre | 200.00 | 66 | 13,200 |
| 135 | Execution/fixing of 25 MM x 2 5 MM PVC channel on wall including supply of all fixing materials & accessories by contractor. Returning the left over material to the railway store. | Metre | 200.00 | 20 | 4,000 |
| 136 | Shifting and installation of control and other telecom equipments like control phone, magneto phone, auto phone, VHF sets, VF Repeaters etc. from old station building to new station building as per instructions of site engineer. All the material required for fixing and installation will be supplied by the contractor. Inspection: Consignee | Station | 1.00 | 9,254.45 | 9,254.45 |
| 137 | Supply of Digital Clock suitable for Office Complex with GPS Synch ronization in standalone mode as per Clause 6 of RDSO SPN TC 62 / 2008 , (Rev 3.0) Arndt. 2 or latest. Inspection: (i) RDSO / RITES i f value of item in work more than 5 lakhs or as per e x t a n t policy. (ii) Consignee subject to procurement from RDSO approved vendors i f value o f whole item i n work less than 5 lakhs or as per extant policy | Numbers | 10.00 | 13,215 | 1,32,150 |
| 138 | "Supply of standard 19""rack mountable , - 48V DC working, Add-Drop STM-4 SDH equipment conforming to GR No. TEC/GR/TX/SDH 010/03.Jan 2011 (with latest amendment) complete with redundant power supply, 2 no. STM 4 of aggregate L.4.2 Optical interface modules/ Cards one each for East and west side, TX/RX and 2 nos. of STM-1 S 1.1 optical interface modules complete with 5 mtrs long optical fibre cords, 21 E1s with DDFs and cable assembly for termination to DDF and minimum 8 nos. of 10/100 Base-T Ethernet ports, Fast Ethernet on SDH [EoS] 10/100 Base-I interface module/card supporting with LCAS and GEP, order wire subrack DDF installation material, manuals and other accessories. Complete Engineering order wire (EOW) arrangement. Necessary/ Firmware for local/remote monitoring/ configuration of the equipment through EMS and Software/ Firmware interface to work all Network elements as Gateway Network Element [GNE], 2 nos of MCBs of appropriate rating and necessary connecting cords and cables for power supply modules. " | Numbers | 2.00 | 1,99,228 | 3,98,456 |
| 139 | "Installation and commissioning of STM-4 in the existing rack with ready infrastructure or in new rack as desired by the site Engineer. " | Numbers | 2.00 | 23,495 | 46,990 |
| 140 | "Supply of DC-DC converter. for emergency communication through V.H.F. as per specification - the DC DC converter shall be independent for each vhf base equipment (voice equipment) and shall allow to work from -48V nominal input (-48V to -60V variation) & output 12V DC. The power capacity to deliver 10A current with output short circuit protection & ripple voltage less than 5mv for telecom circuit. Short circuit current not more than 2 mA, input- output insulation by 2.5 KV, load & output regulation +/-1% with ERTL certification. Make: DACS, Pune or Webfil Kolkata or Machronics, Kolkata or similar. Inspection: consignee. " | Numbers | 4.00 | 20,742 | 82,968 |
| 141 | "Supply of Buffer amplifier for emergency communication through V.H.F. As per voice frequency channel shall be 600 ohms balanced 4W (viz. 2W for transmit, 2W for receive) and 2W for E&M signalling. The nominal voice frequency signal shall be 0 dbm level the buffer amplifier should work of -48vdc or can from the DC-DC converter. Burn in of the complete equipment at 55 degree centigrade to avoid infancy failures. During the test the equipment shall be kept continuously on. Inspection :consignee. " | Numbers | 4.00 | 13,837 | 55,348 |
| 142 | Supply, Installatin, Testing & Commissioning of Protocol Converter Unit suitable for interfacing datalogger with electronic interlocking equipment. Inspection: RDSO | Numbers | 1.00 | 60,227.2 | 60,227.2 |
| 143 | "Supply, fixing and wiring of surge protection device in attachment plug module with replaceable surge protection for coaxial signal, interfaces N-connector plug/socket installed as surge protection between antenna and 25 W VHF sets, make- Phoenix Contact model CN-UB- 280DC-SB-2818148 or similar as per specifications. This includes mounting plate and reserve gas filled surge arrestor (one no.) with all required connectors/clamp for commissioning of SPD at site. Inspection: Consignee. " | Numbers | 2.00 | 6,985 | 13,970 |
| 144 | "Installation, testing and mounting of G.P. antenna on a GI pipe which is to be fitted on the roof of equipment room and lightning arrestors also to be mounted on a GI pipe. All fixing materials to be supplied by the tenderer and left-over material to be returned to the railwaystore. N.B. G.P. Antenna, GI pipe (50 mm dia) and lightning arrestor will be supplied by the railway. Installation, testing and mounting of G.P. antenna on a GI pipe which is to be fitted on the roof of equipment room and lightning arrestors also to be mounted on a GI pipe. All fixing materials to be supplied by the tenderer and left-over material to be returned to the railwaystore. N.B. G.P. Antenna, GI pipe (50 mm dia) and lightning arrestor will be supplied by the railway. " | Numbers | 2.00 | 6,190 | 12,380 |
| 145 | Installation, testing & commissioning of operating panel room VHF/SIMPLEX VHF base equipment, DC- DC simplex VHF base equipment, DC-DC converter, buffer amplifier and laying of co-axial cable simplex VHF base equipment, DC-DC converter, buffer amplifier should be mounted on rack of suitable size and other fixing arrangement. | Numbers | 2.00 | 2,181.98 | 4,363.96 |
| 146 | Supply of high fidelity PA horn speaker IP- 65 rated model AMH-402T, make Ahuja or similar. | Numbers | 10.00 | 6,113 | 61,130 |
| 147 | Supply of Failure Analysis System (FAS) with Fault Analysis Software (Datalogger Analyser) consisting of a PC (Make- Dell /HP or Equivalent) as per Technical Specifications. The specification of FAS should be got approved from the Engineer in charge before supply. Note: The minimum specification should be as given core i7 or higher version processor (speed 3.2 GHZ, 4 MB cache memory), 8 GB RAM,2TB HDD or Higher, Two front and four rear USB port,1 Serial & 1 Parallel Port,1VGA Port,21" LED Colour Monitor (HP/DELL or equivalent) or Bigger Size, Sound Card with Speaker,1000 MBPS Network Card, Keyboard, Optical Mouse,10/100 T Lan Card, Combo Drive, Microsoft Windows 10 Licensed OS with Licensed (Antivirus, MS Office etc.),UPS 750 VA with 30 Minutes minimum backup(APC/ Microtek or Equivalent) , Laserjet Printer(H P Pro 1108 or superior). Inspection: Consignee | Numbers | 2.00 | 1,16,554 | 2,33,108 |
| 148 | Supply of T-Networking equipments suitable for Networking to the existing Data Logger equipments. This includes supply of all equipment / accessories required for the p u r p o s e e . g . m o d e m s a n d network accessories. Inspection: Consignee. | Set | 1.00 | 22,987 | 22,987 |
| 149 | Commissioning of T-Networking suitable for Networking t o t h e existing D a t a Logger equipments. T h i s includes s u p p l y o f all equipment / accessories required for the purpose. Inspection: Consignee. | Set | 1.00 | 6,098 | 6,098 |
| 150 | Dismantling of Microlok rack, relay rack , cable termination rack of existing relay room and equipments of existing panel room & power room etc. | Numbers | 1.00 | 6,621 | 6,621 |
| 151 | Supply of Digital Multimeter of Fluke 287 Industrial or Similar/ superior True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second .Item to be supplied after successful demonstration and Approval of Railway. Inspection: Consignee | Numbers | 2.00 | 44,064 | 88,128 |
| 152 | Supply of Professional AC/DC clamp meter 3 Y digit , true RMS measurement, For Measurement of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 MW and frequency up to 1 MHz with set of leads & carrying case. Model - DCM 39A or equivalent/ higher make Motwane/ Stanlay/ Fluke/Megger. Item to be supplied after successful demonstration and Approval of Railway. Inspection: Consignee | Numbers | 2.00 | 28,752 | 57,504 |
| 153 | "Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance measurement up to 1000 ohms. Accuracy 0.1 - 0.99 D: 1%, 1 - 49 D: 1.5% Also measure current leakage u p t o 2 0 A . No spines required for measurement Model - DECT-2 or equivalent / higher version make Motwane/ Stanlay/ Fluke/Megger.Item t o be supplied after successful demonstration and Approval of Railway. Inspection: Consignee" | Numbers | 2.00 | 94,960 | 1,89,920 |
| 154 | Supply of electronic Cable route tracer/locator with underground cable and pipe locating receiver and cable avoidance tool that provide location of armoured OFC , signalling and telecom , power cable etc. make : C Scope Stanley/ 3M Dynatel , model: DXL-4 DBG /2273M-iD 30 or Similar/ superior. Item to be supplied after successful demonstration a n d Approval of Railway. Inspection: Consignee | Numbers | 1.00 | 4,10,718 | 4,10,718 |
| 155 | Supply of Electric Point machine IRS type 220 mm throw, high thrust (AC immunity 160V AC), non trailable to operate on 110V, DC complete with Lock and Detector slides, Cable Termination Box and clamp lock 60 Kg. confirming to IRS: S 24/2002 & Assy. Drg. No. RDSO-S /11000 & For Motor IRS: S 37/82. (items to be procured through stores)Inspection: RDSO | Numbers | 5.00 | 1,31,165 | 6,55,825 |
| 156 | Supply of GI bend pipe, 'B' class, 50mm dia. for cable entry in point machines, alongwith required fixing arrangements as per standard practice on Eastern Railway. Inspection: Consignee. | Numbers | 25.00 | 2,613 | 65,325 |
| 157 | Dismantling of point machine with ground connection including point JB. | Numbers | 25.00 | 1,169 | 29,225 |
| 158 | Supply of Portable operator console for onsite programming of Axle Counters as per technical requirement given in tender document. Inspection: Consignee | Set | 1.00 | 76,514 | 76,514 |
| 159 | Supply of Drill bit 9/32" (7.14MM). IS:5099/83 AND 5101/69 OR LATEST. Inspection: Consignee | Numbers | 20.00 | 51 | 1,020 |
| 160 | Releasing of existing TLJB and its accessories | Numbers | 100.00 | 748 | 74,800 |
| 161 | "Supply of colour light signal post 4.6 mtrs. and ladder 4.5 mtrs. With bases for ladder and post as per RDSO SPEC. NO. IRS-5-6-8 1 and DRG. NO. SA-23153/ADV/AIT- 1. All drawing should be as per latest. Note: - this includes signal post, base, ladder, ladder base, platform, rail guard & blanking off. Materials to be procured from approved list of firms for manufacturer & supply of mechanical signalling items. Inspection: (i)RDSO/RITES if value of item in work more than 5 lakhs ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 10.00 | 15,950 | 1,59,500 |
| 162 | "Supply of colour light signal post 3.6 mtr and ladder 3.5 mtr with bases for ladder & post as per RDSO SPEC. NO. IRS: 5-6-81 (or latest) and DRG. NO. SA-23150 (ADV), ALT- 1 (OR LATEST). CLS base as per DRG. NO. S-2011/M (OR LATEST). Note: - this includes signal post, base, ladder, ladder base, platform, rail guard & blanking off. Materials to be procured only from RDSO approved list of firms for manufacture & supply of mechanical signalling items. Inspection: (i)RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 10.00 | 15,727 | 1,57,270 |
| 163 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 2 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material as RDSO SPEC NO. RDSO/ SPN/ 151/1997 OR LATEST. Afl drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to 'LED' type. Note: installation, erection & wiring of signalling unit includes LED signal lighting unit including current regulator. This also includes protection of unit from rain water. (A) "Supply. Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 3.00 | 26,583 | 79,749 |
| 164 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 2 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material as RDSO SPEC NO. RDSO/ SPN/ 151/1997 OR LATEST. Afl drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to 'LED' type. Note: installation, erection & wiring of signalling unit includes LED signal lighting unit including current regulator. This also includes protection of unit from rain water. (B) Execution | Numbers | 3.00 | 1,658 | 4,974 |
| 165 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 3 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material as per rdso spec no. Rdso/spn/151/1997 or LATEST. All drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to 'LED' type. Note: installation, erection & wiring of signalling unit includes led signal lighting unit including current regulator. This also includes protection of unit from rain water. (A) "Supply. Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 1.00 | 27,309 | 27,309 |
| 166 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 3 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material as per rdso spec no. Rdso/spn/151/1997 or LATEST. All drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to 'LED' type. Note: installation, erection & wiring of signalling unit includes led signal lighting unit including current regulator. This also includes protection of unit from rain water. (B) Execution | Numbers | 1.00 | 2,352 | 2,352 |
| 167 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 4 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material a s per rdso spec no. Rdso/spn/151/1997 or LATEST. All drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should b e compatible to 'LED' t y p e . Note: installation, erection & wiring of signalling unit includes led signal lighting unit including current regulator. This also includes protection of unit from rain water. (A) "Supply. Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 16.00 | 30,783 | 4,92,528 |
| 168 | Installation, erection and wiring of CLS unit, post, ladder & base LED unit including paying out of tail cable from location box and earthing of CLS (LED type). This includes supply of non - metallic (FRP) colour light signal housing multi-unit type for Rly. Signalling suitable for RE Area 4 Aspect complete without lenses, lamps and signal transformer as per DRG. NO. SA 23001/A/M(ADV), ALT.8 and as per SPEC. NO. RDSO/SPN/194/2006 (VER1.0) OR LATEST. FRP material a s per rdso spec no. Rdso/spn/151/1997 or LATEST. All drawings should be as per latest. Materials to be procured from RDSO's approved firm only. Note: Signal unit should b e compatible to 'LED' t y p e . Note: installation, erection & wiring of signalling unit includes led signal lighting unit including current regulator. This also includes protection of unit from rain water. (B) Execution | Numbers | 16.00 | 2,730 | 43,680 |
| 169 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (A) "Supply of 1 WAY AS PER RDSO DRG. NO. SA- 23401 (ADV)/ ALT.2 Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 3.00 | 34,117 | 1,02,351 |
| 170 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (B) Execution of 1 WAY AS PER RDSO DRG. NO. SA- 23401 (ADV)/ ALT.2 | Numbers | 3.00 | 669 | 2,007 |
| 171 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (C) "Supply of 2 WAY AS PER RDSO DRG. NO. SA- 23402 (ADV)/ ALT.2 Inspection: (i)RDSO/RITES if value of item in work more t h a n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 2.00 | 43,270 | 86,540 |
| 172 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (D) Execution of 2 WAY AS PER RDSO DRG. NO. SA- 23402 (ADV)/ ALT.2 | Numbers | 2.00 | 1,203 | 2,406 |
| 173 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (E) "Supply of 3 WAY AS PER RDSO DRG. NO. SA- 23403 (ADV)/ ALT.2 Inspection: (i)RDSO /RITES if value of item in work more tha n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 3.00 | 39,151 | 1,17,453 |
| 174 | Installation, erection and wiring of junction type route indicator [LED type] this include supply of non metallic FRP junction type route indicator for Railway Signalling suitable for RE Area without lamp. Lenses, signal transformer as per RDSO SPEC. NO. RDSO/SPN/194/2006 (VER - 1.0) OR LATEST. FRP material as per RDSO SPEC. NO. RDSO/SPN/151/ 1997 OR LATEST. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: Signal unit should be compatible to LED type. Note: installation, erection & wiring of signalling unit includes LED signal, lighting unit including current regulator. This also includes protection of unit from rain water. (F) Execution of 3 WAY AS PER RDSO DRG. NO. SA- 23403 (ADV)/ ALT.2 | Numbers | 3.00 | 1,583 | 4,749 |
| 175 | Installation, erection and paying out of tail cable from location box and wiring of shunt signal, LED unit as per technical specification. This includes supply of position light shunt signal unit (without lenses, lamps) with Base Post and without signal transformer a s p e r R DSO D R G NO. SA- 23840/ADV/ALT-2. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note- Signal unit should be compatible to 'LED' type. (A) "Supply. Inspection: (i)RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 5.00 | 6,782 | 33,910 |
| 176 | Installation, erection and paying out of tail cable from location box and wiring of shunt signal, LED unit as per technical specification. This includes supply of position light shunt signal unit (without lenses, lamps) with Base Post and without signal transformer as per RDSO DRG NO. SA- 23840/ADV/ALT-2. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note- Signal unit should be compatible to 'LED' type. (B) Execution | Numbers | 5.00 | 502 | 2,510 |
| 177 | Casting, concreting and curing of foundation for Shunt signal including cost of a l l materials required for casting and concreting. All materials required for execution will be supplied by the contractor, including holding down galvanised bolts & nuts with washers, cement, sand, stone chips, etc. As per DRG. NO SK/5/95/NKG. | Numbers | 5.00 | 4,087 | 20,435 |
| 178 | Supply of Dual Tone Bell /Buzzer with Flasher arrangement and 20 Watt horn working on 24 V DC/ 110 V AC for warning road users at LC gates.Inspection: Consignee | Set | 1.00 | 5,417 | 5,417 |
| 179 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (A) Supply of Master telephone with voice recording facility. Inspection : Consignee. | Numbers | 49971.00 | 2 | 99,942 |
| 180 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (B) Execution o f Master telephone w ith voice recording facility. This Includes testing and commissioning, all installation related material to be supplied by the contractor as per site requirement. | Numbers | 1.00 | 6,988 | 6,988 |
| 181 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (C) Supply of Gate (slave)te1ephone. Inspection : Consignee. | Numbers | 2.00 | 5,210 | 10,420 |
| 182 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (D) Execution of Gate (Slave)telephone. This Includes testing and commissioning, all installation related material to be supplied by the contractor as per site requirement. | Numbers | 1.00 | 741 | 741 |
| 183 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (E) Supply of 24V Power supply unit with MF Battery and Charger for Master Telephone. Inspection : Consignee. | Numbers | 2.00 | 6,733 | 13,466 |
| 184 | "Electronic LC gate telephone systems with voice recorder as per RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection- consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" (F) Execution of 24V Power supply unit with MF Battery and Charger for Master Telephone. This Includes testing and commissioning, all installation related material to be supplied by the contractor as per site requirement. | Numbers | 1.00 | 805 | 805 |
| 185 | Laying of HDPE pipe duct, 40/33 mm in trenches and protective works including pulling of mono-mode armoured OFC cable (24 fibres) through duct in trenches and as advised by site engineer. Note:- (1) the contractor wifi take over the OFC cable from railway store to site of work duly checked the continuity of each fibre from end to end . (2) before & after laying of optical fibre cable through duct, continuity test from end to end of each fibre to be made by the contractor to ensure availability of all 24 fibre duly certified by the site engineer. | Kilometre | 4.00 | 24,734 | 98,936 |
| 186 | Repair of pucca roads to original state in level crossing area after cable laying. | Metre | 100.00 | 256 | 25,600 |
| 187 | Supply, Transportation at site and Installation of RCC cable route marker engraved and painted on both side along the route at every 50 meter and at route diversion. The cable marker is to be fabricated as per RDSO drawing No. RDSO/Cable Laying/ 020, issued vide RDSO document No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. The fixing work is to be done as per extant practice of E. Rly. and as per Railway site supervisor. | Numbers | 50.00 | 417 | 20,850 |
| 188 | Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom without brick as per DRG. NO. S&T/C- 40(NKG), SK/4/95/NKG, SK/8/95/NKG. or latest alongside the track in all kinds of soil, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc. The work shall be done as per the extant practice on Eastern Railway and instructions of Railway Engineer at site. Note:-(a) for all trenches from distant signal to home signal and to relay room, the minimum headway above the uppermost cable in the trench should be 600mm. If due to a large no. Of cables headway is not available, 4" of 1:2:4 concreting should be done. Note:-(b-1) payment wifi be made as per actual work done on pro-rata basis, if required depth is not available at site. (b-2) if the depth of trench is not uniform in a span of 100 mtr. Or shorter lengths if site condition demands along the cable run, minimum depth will be taken for that particular stretch for payment. | cum | 6000.00 | 245 | 14,70,000 |
| 189 | Digging of trench 1.2 Mtrs. deep from rail flange/ road level and 0.3 Mtrs to O.6 Mtrs wide and back filling after placing of DWC / RCC/GI pipe. (Placing of DWC/ RCC/GI pipe covered separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. F o r track crossing, RDSO sketch No. SDO/CABLE LAYING/ 009 or latest and for Road Crossing, RDSO sketch No. SDO/CABLE LAYING/010 or latest are to be followed. | cum | 250.00 | 278 | 69,500 |
| 190 | Excavation of OFC pit for cable jointing of size 1.5m x 1.5m x 1.2 m for all type of soils. The section. Back filling the pit and ramming after jointing. Provision of brick walling the four walls and bottom of pit with RCC slab, back filling with earth and ramming as per drawing. N.B. all the materials including cement required for the above will be supplied by the tenderer. | Numbers | 4.00 | 6,674 | 26,696 |
| 191 | Supply , Installation, testing & commissioning of new modular / pyrotech workspace Make or Cosmos or Similar, new modular control desk for provision of two numbers of 42 inch monitors in "SLAT" system as per approved drawing (attached with tender document) This item includes : (i) Desktop made of 12 mm ASS + ASS 12 mm MDF (ii) structure : powder coated aluminium sturdy structure and extreme side aesthetic legs (iii) shutters : 18mm MDF (iv) proper cooling arrangement for CPR cabinet (v) 2mm thick extruded aluminium "SLAT" wall . The workspace will be provided for storage in FLAT system, this includes space for housing two numbers of embedded PC, 2 No. of FDMS and their power supply arrangement with proper ventilation. This includes supply of two chairs ( Godrej PCH 7002 D or superior , as approved by Engineer in charge) for operators to be supplied. Inspection: Consignee | Station | 1.00 | 6,08,777 | 6,08,777 |
| 192 | "Supply of SMPS based Battery Chargers as per RDSO Spec for Telecom use 48 volts, 25 Amps in 2+1 configuration modules of 25 Amps with ultimate expandable capacity 50 Amps, automatic switching between the modules as per RDSO Spec No. RDSO/ SPN/TC/23/1999 version 4 or latest along with two potential free contacts. Inspection: (i) RDSO if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | Numbers | 2.00 | 92,728 | 1,85,456 |
| 193 | Installation o f B a t t e r y c h a r g e r s , Power distribution Board along with MCBs of suitable ratings and wiring and commissioning of External alarm contacts through EMS. The work includes supply of battery rack, MCBs, battery cable and battery lugs and other accessories required for installation of power plant. Inspection: Consignee | Numbers | 2.00 | 4,578 | 9,156 |
| 194 | Supply of 48Volt/200AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S- 93/96(A) with amendments- 1 or latest Inspection: RDSO | Numbers | 2.00 | 89,393 | 1,78,786 |
| 195 | Installation, wiring, testing & commissioning of 48Volt/200AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S-93/96(A) with amendments- 1 o r latest. Inspection: Consignee | Numbers | 2.00 | 19,268 | 38,536 |
| 196 | "Supply o f power cable 3 core 2 . 5 s q mm multi strand (36 / 0 .3 mm dia) cable as per IS 694:1990 reaffirmed 1 9 9 5 o r latest suitable for railway electrification area shall be of reputed m a k e like Delton , LAPP, Finolex, or Similar. Inspection: Consignee." | Metre | 500.00 | 61 | 30,500 |
| 197 | "Supply of V.F. transformer 1220:600/470 /:1220 as per IRS:TC-22/ 76 or latest. Inspection - consignee " | Numbers | 10.00 | 732 | 7,320 |
| 198 | "Installation of V.F. transformer 1220:600/470 /:1220 as per IRS:TC-22/ 76 or latest. Inspection:- consignee " | Numbers | 10.00 | 430 | 4,300 |
| 199 | "Supply of 10 pair switchboard indoor copper cable 0.6 dia as per specification IRS:TC:24:91. or TEC/GR/WIR-06/ 03. MAR 2002 with latest amendment. " | Metre | 500.00 | 49 | 24,500 |
| 200 | "Supply of 2 MB Programmable Primary Digital drop insert multiplexer as per RDSO Specs. IRS TC- 68/2004 (Amnd.1) or latest with conference facility and other stipulation to tender documents and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. It shall support NMS installed at Test Room and may operate local/remote location of entire section. It also includes submission of all technical documents, manuals and supply of all miscellaneou s items which will be required for final testing and commissioning of system. The above MUX should be equipped with following circuits: - i) 2 wire/ 4 wire E&M VF circuits ( minimum 16 nos ckts) ii) Subscriber loop circuits ( minimum 4 nos ckts) iii) Exchange loop interface circuits (minimum 8 circuits ) iv) This also includes connecting all pigtails, optical patch cords etc. to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all evens on DDF taking PVC cable over runway or a wall and termination of VF i n t e r f a c e c i r c u i t t o t h e K r o n e type. Inspection:(i) RDSO if value of item in work more than 5 lakhs or as per extant policy (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in " | Numbers | 4.00 | 1,49,308 | 5,97,232 |
| 201 | "Installation, wiring, testing and commissioning of 2 MB Programmable Primary Digital drop insert multiplexer as per RDSO Specs. IRS TC- 68/2004 (Amnd.1) or latest with conference facility and other stipulation to tender documents and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. It shall support NMS installed at Test Room and may operate local/remote location of entire section. It also includes submission of all technical documents, manuals and supply of all miscellaneou s items which will be required for final testing and commissioning of system. The above MUX should be equipped with following circuits: i) 2 wire/ 4 wire E&M VF circuits ( minimum 16 nos ckts) ii) Subscriber loop circuits ( minimum 4 nos ckts) iii) Exchange loop interface circuits (minimum 8 circuits ) iv) This also includes connecting all pigtails, optical patch cords etc to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all evens on DDF taking PVC cable over runway or a wall and termination of VF interface circuit to the Krone type. All materials such as wires for Earthing & power supply, wire carrying aluminium ladder, MCB, Connectors, foundation bolts, nuts, base frame, mounting accessories for fitting of transformers, U-Link Panels, inter connecting cables etc. required for the above shall be supplied by the contractor. " | Numbers | 4.00 | 11,372 | 45,488 |
| 202 | Supply, installation and complete indoor wiring of 19 inch (42U) covered Rack of size 2035 mm x 600 mm x 600 mm (Approx.). The rack shall be complete with all fittings f o r h o u s i n g SDH equipments, Primary MUXES, DDF, MDF using crone modules and other equipments like runway ladders etc. completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender document. It should be possible to lock all the equipments with only order wire telephone remaining o u t s i d e t h e r a c k . Inspection: Consignee | Numbers | 4.00 | 37,570 | 1,50,280 |
| 203 | Supply of Track feed Battery Charger as per RDSO Specn. No.IRS: 5-89/2013 Ver.1.0 or latest. Charging Capacity Rating 10 Amps for Charging 8 0 A H Battery. Inspection: RDSO | Numbers | 50.00 | 4,894 | 2,44,700 |
| 204 | Supply of Adjustable Track Feed Resistance 30 Ohms (Disc Type) as per RDSO Drg. No.SA- 20161-66/ M or latest. Inspection: Consignee | Numbers | 50.00 | 171 | 8,550 |
| 205 | Installation wiring, testing and commissioning of single rail dc track circuit (TRACK CIRCUIT (BEYOND 200 MTRS.)) as per approved track circuiting plan. The work includes track battery charging and installation, fixing of track bonding (double) with 8 SWG soft GI wire, laying of tail cables with track lead junction box, rail connector with galvanised iron wire, track jumpering(double) with supporting arrangement for holding as per track circuit plan. It also includes installation and wiring of track feed chargers, track relays, track circuit equipment's in the location box including fuses and ARA terminals required for the purpose as per DRG NO. SK/10/95(NKG) including drilling of 9/32" hole on rails where required. Fixing of track lead junction boxes. Note: - battery charging solution to be supplied by the contractor & double jumpering to be provided. | Per Track Circuit | 10.00 | 3,259 | 32,590 |
| 206 | Installation wiring, testing and commissioning of single rail dc track circuit (SHORT LENGTH TRACK CIRCUIT UPTO 200 MTS.) as per approved track circuiting plan. The work includes track battery charging and installation, fixing of track bonding (double) with 8 SWG soft GI wire, laying of tail cables with track lead junction box, rail connector with galvanised iron wire, track jumpering(double) with supporting arrangement for holding as per track circuit plan. It also includes installation and wiring of track feed chargers, track relays, track circuit equipment's in the location box including fuses and ARA terminals required for the purpose as per DRG NO. SK/10/95(NKG) including drilling of 9/32" hole on rails where required. Fixing of track lead junction boxes. Note: - battery charging solution to be supplied by the contractor & double jumpering to be provided. | Per Track Circuit | 25.00 | 3,244 | 81,100 |
| 207 | Installation, wiring, testing & commissioning of track circuit involving points & crossings as per track circuiting plan, track battery charging and installation including drilling 9/32" hole on rails; fixing of bonding(double) with 8 SWG soft GI wire, insulation of stretcher bars (leading & following), gauge / crossing tie plates involving cutting and riveting/welding of angle clit, split stretcher bars, fixing of track lead junction box, rail connector with GI wire, track jumpering(double) with supporting arrangement for holding termination of track lead wires, including series jumpers, jumper wire terminals, track feed set(track chargers, resistance, fuses, battery etc.) As per approved IYD for point zone track circuit. Note: - battery charging solution to be supplied by the contractor & double jumpering to be provided. | Per Track Circuit | 15.00 | 3,348 | 50,220 |
| 208 | Supply of Track Lead Junction Box(TLJB) made from FRP material including brass bolts and hylam board sheet with terminals etc. The technical specifications are as follows:(a) TAB complete with cover to be in black/red having approximate weight of 4.0 Kg with L-262mm W- 212mm and H 90 mm and all the holes required for mounting on FRP stump (vertically two for each FRP angle) HDPE pipe , cable etc.(b) Each TAB shall have two bakelite terminal block fitted horizontally : each bakelite terminal block shall have t w o nickel chrome p l a t e M10 brass terminal, 50mm long. Alongwith each TAB , nickel chrome plated brass links(two nos.Of adequate strength for vertical linking of the terminals to be supplied.(c) HDPE pipe of size 32/35mm , 380 mm long alongwith two nuts for fixing on the TLJB hole .(d) The FRP stump for mounting the TAB to be made of one meter long 30mm X30mmX 4mm angle(2 nos.) and 300mm long 30mm X30mmX 4mm angle(1 no.) fixed at 50 mm from the bottom using galvanised nuts and bolts. The TLJB and the angles for stump should come alongwith holes on them for fixing using galvanised nuts and bolts of adequate strength t o be supplied alongwith TAB.Inspection: (i) RITES if value of item in work more than 5 lakhs(ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. | Numbers | 50.00 | 3,564 | 1,78,200 |
| 209 | Erection, Fitting and Rail connection of Track Lead Junction Box on two supports (FRP stumps) with contractor's fixing material. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee | Numbers | 50.00 | 1,316 | 65,800 |
| 210 | Supply of B Type Choke as per RDSO Specn. No.IRS: S-65/83 (Airind. 1) or latest. Inspection: RDSO. | Numbers | 50.00 | 5,151 | 2,57,550 |
| 211 | Supply of Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. 5- 69/M. Inspection: Consignee. | Numbers | 1000.00 | 4 | 4,000 |
| 212 | Supply of GI wire 8 SWG (4mm dia) suitable for track circuit r a i l bonding. Inspection: Consignee | Numbers | 500.00 | 12 | 6,000 |
| 213 | Provision/Installation of bonding with GI wire 4mm dia (8 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.0/7.1/7.2 mm dia. holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Inspection: Consignee. | Numbers | 100.00 | 180 | 18,000 |
| 214 | Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No.IRS:S- 88/2004 or latest with inter cell connectors, nuts and bolts etc. (2V, 80AH) | Numbers | 160.00 | 3,574 | 5,71,840 |
| 215 | Charging of lead acid cell (Secondary cell) of various capacities as per Manufacturer's/Railway engineer's instruction. Acid and distilled water to be supplied by the contractor. Specific gravity acid should be approved type duly inspected by consignee. This includes installation and commissioning of battery in circuit. Battery to be kept on wooden rack. (2V, 80AH) | Numbers | 160.00 | 367 | 58,720 |
| Schedule total | ₹8,57,62,251.61 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .