Extension of Rest Room Located at Conference Room of GM-O Office In Overhaul Division, HAL-BC Including Civil and Electrical Works

HINDUSTAN AERONAUTICS LIMITED BANGALORE OVERHAUL DIVISION

NAME OF THE WORK: Extension of Rest Room Located at Conference Room of GM(O) Office In Overhaul Division, HAL(BC) (Including Civil and Electrical Works) CONTRACT NO. HAL/OVL/C-093/24-25

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

A DISMANTLING AND DEMOLITION

1 Demolishing brick work built in cement mortar ,manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge 4.00 cum 1698.79 #NAME? 6795.17

2 Demolishing cement concrete of nominal 1:4:8 or leaner mix manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge 1.00 cum 1239.83 #NAME? 1239.83

3 Dismantling tile work in floors and roofs(for thicknes of tiles 10mm to 25mm) laid in cement mortar including stacking material within 50 metres lead. 25.00 Sqm 60.52 #NAME? 1513.10

4 Dismantling of old plaster or skirting raking out joints and cleaning the surrface for plaster including disposal of rubbish to the dumping ground within 50meters lead 35.00 Sqm 45.06 #NAME? 1577.21

5 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 25.00 Sqm 46.46 #NAME? 1161.62

B CARRIAGE AND DISPOSAL

6 Disposal of moorum/building rubbish/malba/similar unserviceable ,dismantled or waste material by mechanical transport including loading,transporting,unloading to approved municipal dumping ground for lead up to 10km for all lifts complete as per direction of engineering in charge .Note : Item to be applicable in urban areas having direction for restricted hours for movement/plying of laod carrying motor vehicke of 3.5 cum or more. 16.00 cum 407.42 #NAME? 6518.77

C EARTH WORK AND RE-FILLING

7 Earth work in Excavation by mechnaical means(Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms for all all lifts including getting out the excvated soil and disposal of surplus soil as directed within a lead of 50m. 2.8.1 All kinds of soil. 12.00 Sqm 214.64 #NAME? 2575.65

8 Filling available earth (excluding rock) in trenches ,plinth ,sides of foundation etc in layers not exceeding 20cm ,consolidated each deposited layer by ramming and watering lead up to 50 and foll all lift . 6.00 cum 161.62 #NAME? 969.70

9 Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes 5.00 cum 7705.13 #NAME? 38525.65

10 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 5.00 Sqm 948.68 #NAME? 4743.38

11 Random Rubble masonry with hard stone in foundation and plinth inlcuding levelling up with cement concrete 1:6:12 up to plinth level .Cement mortar 1:6 6.00 cum 6028.68 #NAME? 36172.10

12 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall 95.00 Sqm 315.81 #NAME? 30002.21

13 Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level : 2.50 cum 4292.13 #NAME? 10730.31

14 Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 3.00 cum 7974.89 #NAME? 23924.67

15 Steel reinforcement(Thermo-Mechanically Treated bars of grade Fe-500D or more.)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. 135.00 Kg 88.93 #NAME? 12005.62

16 Centering and shuttering including strutting,propping etc and removal of form for small lintels not exceeding 1.5m clear span ,moulding as in cornices,window sills,string courses,bands,copings,bed plates,anchor blocks and like etc all complete 20.00 Sqm 323.36 #NAME? 6467.15

H STRCUTURAL STEEL WORKS

17 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 625.00 Kgs 110.25 #NAME? 68903.65

I WOODEN DOORS AND FITTINGS

18 Providing wood work in frames of doors,windows,c;erestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of required dia nd length (hold fast lugs or dash fasterner shall be paid for separtely.9.1.1: Second class teak wood. 0.05 cum 117872.93 #NAME? 5893.65

19 Providing 40x5mm flat iron hold fast 400mm long including fixing to frames with 10mm dia bolts,nuts and wooden plugs and embeddding in cement concrete block 300x100x150mm 1:3:6(1 cement:3 coarse sand:6 Graded stone aggreagtes 20mm nominal size) 6.00 No 188.70 #NAME? 1132.23

20 Providing and fixing ISI marked flush door shutters conforming to IS :2202(Part-I) Decorative type,core of block construction wit frames of 1st class hard wood and well matched teak 3 ply veenering with vertical grains or cross bands and face veneers on both sides of shutters.9.20.2: 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 2.00 Sqm 2612.22 #NAME? 5224.43

21 Providing and Fixing alumnium tower bolts 250 x10mm size , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 8.00 Nos 94.95 #NAME? 759.60

22 Providing and Fixing alumnium handles 125mm long , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 8.00 Nos 54.63 #NAME? 437.03

23 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 )alumnium lever handles of approed quality with necessary screws etc complete 1.00 Nos 716.52 #NAME? 716.52

24 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body ,door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc complete 2.00 Nos 810.68 #NAME? 1621.36

25 Providing and fixing ISI marked oxidised MS door latches of size 300x20x6mm conforming to IS 5930 with screws etc complte.(copper oxidised as per IS 1378) 2.00 Nos 81.10 #NAME? 162.19

J WPC DOORS AND SHUTTERS FOR TOILET

26 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 15.00 Rmt 763.85 #NAME? 11457.69

27 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 30mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 4.00 Sqm 3584.19 #NAME? 14336.74

28 Providing and Fixing IS 12817 marked stainless steel butt hinges of size 125x64x1.90mm with stainless steel screws etc 12.00 Nos 97.46 #NAME? 1169.58

K WATER SUPPLY AND DRIANGE PIPES AND FITTINGS

29 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

a 75mm diameter 20.00 Meter 205.15 #NAME? 4103.09

b 110mm diameter 18.00 Meter 311.20 #NAME? 5601.51

30 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

75mm diameter 5.00 Nos 75.61 #NAME? 378.07

110mm diameter 5.00 Nos 112.27 #NAME? 561.33

b Single tee with door #NAME? 0.00

c Bend 87.5 degree

75mm bend 4.00 Nos 87.32 #NAME? 349.29

110mm bend 4.00 Nos 123.98 #NAME? 495.90

d Shoe #NAME? 0.00

75mm shoe 4.00 Nos 76.77 #NAME? 307.07

110mm shoe 4.00 Nos 108.72 #NAME? 434.88

31 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Internal work

a 15 mm nominal dia Pipes 18.00 Rmt 410.47 #NAME? 7388.53

32 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

a 20 mm nominal dia Pipes 12.00 Rmt 226.18 #NAME? 2714.18

L CERAMIC FLOOR AND WALL TILES

33 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 15.00 Sqm 1096.69 #NAME? 16450.30

34 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 65.00 Sqm 1045.52 #NAME? 67958.90

M PAINTING WORKS

35 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 50.00 Sqm 60.98 #NAME? 3048.87

36 Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 40.00 Sqm 128.68 #NAME? 5147.01

37 Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. - 10.00 Sqm 117.75 #NAME? 1177.49

38 Finishing walls with Premium Acrylic Smooth exterior paint(Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface) with Silicone additives of required shade: Old work 40.00 Sqm 108.27 #NAME? 4330.67

39 Applying with ready mixed red oxide zinc chromite primer of apporved brand and manufacturer on steel galvanized iron / steel works 25.00 Sqm 55.58 #NAME? 1389.41

40 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work. 25.00 Sqm 128.55 #NAME? 3213.79

N ALUMINUM WORKS

41 Providing and fixing Powder coated aluminium(min thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 25.00 Kg 437.77 #NAME? 10944.19

42 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 10.00 kgs 523.15 #NAME? 5231.52

43 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 5.00 Sqm 1241.19 #NAME? 6205.97

O SANITARY FIXTURES AND FITTINGS

44 Providing and fixing white or coloured symphonic wash down type wall mounted European type water closet of Parryware/Hindware/cera/Jaguar make,colour ,size flushing system by means of concealed 32mm SS flush valve(shall be paid separately ) with regulator valve, Heavy duty material seat cover which shall be tough and hard with high resistance to solvents and shall be free from blisters and other surface defects and shall have chromium plated brass hinges and rubber buffer of suitable size ,32mm dia inlet water connection nuts and bolts,Gaskets,SS rack bolts/anchor bolts/fasteners for EWC hanging . Flush pipe / bend shall be connected to the WC by means of a suitable rubber adaptor.Seat shall be so fixed that it remains absolutely stationary in vertical position without falling down on the WC.Closet shall be fixed to the wall by means of CI chair/ WC fasteners as per manufacturer recommendation and should be 75 mm. long 6.5 mm. diameter counter sunk bolts and nuts embedded in the wall concrete using rubber or fiber washers so as not to allow any lateral displacement. Make : CERA/PARRYWARE/HINDWARE/JAGUAR 1.00 No 12795.76 #NAME? 12795.76

45 Providing and Fixing of required size of oval shaped counter sink wash basin in the granite counter including fixing of Sensor tap with aerator ,waste coupling ,wash basin waste pipe,water connection pipe,angle cock etc all complete .(Waste pipe ,300mm long water connection & angle cock shall be measured and paid separately). Wash basin make : Cera/Parryware/hindware /any other apporved HAL make ) 2.00 each 11961.02 #NAME? 23922.03

46 Supplying and fixing Porcelain body Sensor type(Integrated AC/DC power source ) long flat back urinals of white or any other approved colour, size, of Hindware or any other approved brand having pre and post flushing with water ,having water inlet from backside inlcuding fixing to wall with suitable brackets as per manufcaturers specifications and direction of Eingineer- in- incharge all complete as directed by the Engineer-in-Charge. 2.00 Each 21052.54 #NAME? 42105.08

47 Supply and fixing of 32mm dia SS Flush valve of heavy duty including all fittings, necessary cutting and making good the wall, etc., all complete as directed by Engineer-in-Charge. 1.00 Each 3842.37 #NAME? 3842.37

48 Providing and Fixing CP brass 32mm Bottle trap of approved quality and make as per Direction of Engineering -in-charge 4.00 Nos 853.27 #NAME? 3413.09

49 Providing and fixing 15mm dia nominal bore CP brass bib cock of approved quality 2.00 Nos 417.90 #NAME? 835.79

50 Providing and Fixing 100mm nominal dia circular type PTMT grating of approved quality and colour 8.00 Nos 31.00 #NAME? 248.03

51 Providing and fixing 8mm dia CP /SS jet with flexible tube up to 1 meter long with SS triangular plate to Eureopean type WC of quality and make as approved by Engineering -In-charge 2.00 Nos 287.90 #NAME? 575.80

52 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour: 15mm nominal bore with 30cm long 8.00 Nos 70.09 #NAME? 560.71

53 Providing and Fixing Toilet paper holder-CP brass 1.00 Nos 662.71 #NAME? 662.71

54 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 2.00 Nos 138.82 #NAME? 277.63

55 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 8.00 each 473.55 #NAME? 3788.43

56 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 2.00 each 91.90 #NAME? 183.80

57 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 2.00 NO 584.58 #NAME? 1169.17

58 Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) with 6 mm thick hard board ground fixed to wooden cleats with CP brass screw and washers complete 2.00 Each 1325.88 #NAME? 2651.75

P GRANITE WORKS

59 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.: Granite stone of Approved shade 0.80 Sqm 3341.06 #NAME? 2672.85

60 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite stone slab colour black, Cherry/Ruby red: &Area of slab over 0.50 sqm. 0.60 Sqm 4235.27 #NAME? 2541.16

61 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete 2.00 each 807.01 #NAME? 1614.03

62 Supplying and Fixing "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guarded imported synthetic fabric vertical blinds with polypropylene, maintenance free self controlled runners, powder coated aluminium top channel with control unit on either sides, dust proof, ball chain for operating with plastic and nylon link chain, powder coated bottom weights with latest tilting mechanism on overlap of 12mm for each fabric in matching colours, etc., all complete as directed by the Engineer-in-Charge. 1.00 Sqm 952.70 #NAME? 952.70

63 Providing and fixing one number per track fly proof SS wire gauge to windows using SS wire gauge(grafe 304) with avergae width of aperture 1.4mm with wire dia 0.5mm all complete into the shutters of window frame as specified by the EIC/OIC. 1.00 Sqm 622.88 #NAME? 622.88

64 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

A 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. 15.00 Sqm 1475.54 #NAME? 22133.07

65 Providing and Fixing precoated galvanized iron profile sheets (size ,shape and pitch of corrugation as approved by Engineering in charge ) of total thickness 0.5mm (base metal of minium 0.45mm thickness with total coated of 0.050mm) with zinc coating 120 grams per sqm in 240mpa steel grade,5-7 microns epoxy primer on on both side of sheet and polyster top cot 15-18 microns.Sheet should have protective guard film of 25 micron min to avoid srathes during transportation and should be supplied in single length upto 12m or as desired by EIC.The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm) with EPDM seal,complte up to any pitch in horizontal /vertical or cureved surfaces exlcuding the cost of purlin,rafter and trusses and including cutting to size and shape wherever required 30.00 Sqm 609.07 #NAME? 18272.20

Q ELECTRICAL WORKS

66 Wiring for light point and exhaust fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable GI/pvc box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as per the site conditions 12.00 Points 1209.65 #NAME? 14515.84

67 Nimbus LED Panel 20W Sq 4000K Natural daylight Make: Havells Model No. LHLDESAFRAND020 6.00 Nos. 762.71 #NAME? 4576.27

69 Ventilair DX plastic Domestic Exhaust fan 250mm sweep white make Havells Model FHVVEDX0WH10 6.00 Nos. 1290.68 #NAME? 7744.07

69 Installation, testing and commissioning of pre-wired, fluorescent fitting/compact Fluorescent fitting of all types complete with all accessories and tube/lamp etc directly on ceiling/wall including connections with 1.5sq mm FRLS PVC insulated copper conductor single core cable and earthing etc as required 6.00 Nos. 169.86 #NAME? 1019.18

70 Installation of exhaust fan in the existing opening including making good the damage, connection, testing, commissioning etc as required upto 450 mm sweep 6.00 Nos. 371.06 #NAME? 2226.36

71 Wiring for powerplug with 2x2.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 no. 2.5 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required 20.00 Meters 226.76 #NAME? 4535.17

72 Supply and fixing suitable size GI/ PVC modularbox with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 &15/16 A modular socket outlet and 15/16A modular switch, connections as required 6.00 Nos. 483.20 #NAME? 2899.21

73 Wiring for circuit/submain wiring along with earth wire with 2 x 4 sq mm +1 x 4 sq mm earth wire using FRLS PVC insulated copper conductor single core in surface / recessed medium class PVC conduit as required 10.00 Metres 275.41 #NAME? 2754.08

74 Supply and fixing of 2+4 way SPN single door sheet metal MCB DB 240V on surface /recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnections powder painted including earthing etc as required 1.00 Nos. 1819.02 #NAME? 1819.02

75 Supply and fixing of 10A (Qty 2 nos) and 16A (Qty 2 Nos.) single pole rating 240V 10KA C Curve MCB suitable for inductive load in the existing DB complete with connections, testing and commissioning etc as required 4.00 Nos 211.09 #NAME? 844.37

76 Supply and fixing of 20A/25A SPN rating 240V 10KA C Curve MCB suitable for inductive load in the existing DB complete with connections, testing and commissioning etc as required 1.00 Nos. 493.92 #NAME? 493.92

77 Wiring for circuit/submain wiring along with earth wire with 2 x 1.5 sq mm +1 x 1.5 sq mm earth wire using FRLS PVC insulated copper conductor single core in surface / recessed medium class PVC conduit as required 30.00 Metres 192.13 #NAME? 5763.79

78 Wiring for circuit/submain wiring along with earth wire with 2 x 2.5 sq mm +1 x 2.5 sq mm earth wire using FRLS PVC insulated copper conductor single core in surface / recessed medium class PVC conduit as required 20.00 Metres 226.76 #NAME? 4535.17

79 Supply and fixing of superior quality modern style glossy finish wall mounted hand dryer/electric skin dryer suitable for bathrooms/wash rooms color While Material ABS with low voice, easily mountable and quick drying 1.00 No. 2287.29 #NAME? 2287.29

Total (Excluding GST) #NAME? 647337.44

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 647337.44 ABOVE % 647337.44

Add 18% GST #NAME? 116520.74

Grand Total (Including GST) #NAME? 763858.18

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Overhaul Division

Pre-Qulification Profile

Tender Ref No. or Contract No.: HAL/OVL/C-093/24-25

Name of Work: Extension of Rest Room Located at Conference Room of GM(O) Office In Overhaul Division, HAL(BC) (Including Civil and Electrical Works)

Estimated Amount in Rs.: Rs. 7,63,858/- including GST

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

4 Address for correspondence:

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code #N/A #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

9 Details of person holding the power of Attorney (If different from contact person)

Ph. No. with STD code

FAX No. with STD code

10 DECLARATION I

The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

11 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.