Construction of Kitchipalayam Sub division and Section office building (GF and FF) with cash Collection center at Kitchipalayam 110/22 KV SS campus, Salem.

Amount

Clearing Juliflora jungle with uprooting as directed by the Engineer at site including lead, lift,etc.,complete.

Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2m in all soils including cost of all materials, T&P 's, leads, lifts, etc., complete.

Ordinary soil - 25%

Hard gravelly soil - 60%

Soft disintegrated rock - 15%

Supplying and filling the M.sand for filling in the foundation and basement including cost of M.sand, filling charges (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Plain cement concrete in CC 1:4:8, for bed for grade beam and for basement using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Providing PCC 1:3:6 mix using 40mm HB stone for foundation and others including cost of all materials, lead and lift etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for mat concrete and columns including cost of cement, all materials, labour, curing, vibration charges,including shuttering charges all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for grade beams including cost of cement, all materials, labour, curing, vibration charges, including shuttering charges all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Refilling using the site excavated earth in foundation and basement or wherever necessary in 150mm thick layers, well rammed including filling charges (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Filling the around low laying area alround in section office building outside and raising basement using the gravel, well rammed including filling charges (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beams including cost of cement, all materials, labour, curing, vibration charges, including shuttering charges all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Brick work in CM 1:5 using class II bricks for super structure including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer at site.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, including shuttering charges, all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement).

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades of 600 mm with 80 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering charges all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing, vibration charges, including shuttering charges all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof Beam including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification etc., complete. (but excluding cost of steel reinforcement.)

Providing Steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification etc., complete.

Wall Plastering 1:5, 12 mm thick on both sides of country brick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, all leads, lifts, as per standard specification etc., complete.

Ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3, 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

White washing two coats for Ceiling with approved quality of White cement including cost of all materials, labour, leads & lifts and as directed by Engineer at site.

Painting the Inner & Outer wall two coats with approved weather proof Exterior Emulsion paint over one primer coat for cement plastered wall surface etc., complete complying with standard specification.

Painting new iron works such as windows, ventilators, window bars etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing of FRP Door with frame made out of country wood of size 100mmx75mm and Flush shuter of 30mm thick including cost of necessary fittings,Labour Charges for put up for doors in position etc., complete.

Supplying and fixing UPVC (Un -Plasticized polyvinyl chioride) windows of casement type (open) from the profile the size of outer frame 60mm x58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm,the EPDM rubber (block colour)covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should have key lockable action, security protective hinges strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work.

Supplying, fabricating and fixing UPVC (Un-plasticized polyvinyl chioride) louvered ventilator from the profile the size of outer frame 60mm x 58mm and shutter profile of size of 60mm x 78mm both profile are reinforced with GI/1mm 125GSM and 100% corrosion free,the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) coverd with all over the edges of frame and shutter. The corners and joints should be welded and cleaned, Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing etc., complete.The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing window Grill using MS Square Rod of required size including cost of all materials labour charges for fabrication and fixing lead and lift etc., complete.

Supplying and fixing white glazed earthen ware water closet colour of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying & fixing in position of European water closet with P or S trap with double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank with all internal fittings & accessories inculding cost of all materials, transporting, leads and lift etc., complete.

Supplying and fixing white glazed earthen ware Colour Hand wash basin of size 550x400mm reputed make with Mirror, Towel Rod, Soap Tray and cast iron brackets, 32mm CP waste coupling rubber plugged chain 15mm GM wheel valve, Nylon hose connection, mirror,Towel rod,soap tray,materials, lead, lift, transporting, labour charges etc., complete as per standard specification.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work)

Providing 110mm dia PVC Pipe-6kg/ cm2 PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (For sanitary Arrangement)

Providing 75mm dia PVC Pipe-6kg/ cm2 PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (For sanitary Arrangement)

Providing 40mm dia PVC Pipe-6kg/ cm2 PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (For Water Arrangement)

Supplying and fixing 110 mm dia PVC Door Tee of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.

Supplying and fixing in position first quality and approved variety of 40 mm Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylem sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator).

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and the ceiling with PVC accessories in flush with wall with suitable flush type TW switch box to house the control switch and regulator, and covered with 3 mm Thick Hylem sheet with continuous earth wire connection of 14 SWG TC wire making good of the concealed portion with suitable colour for concealed fan point with (For rheostatic type fan regulator).

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.

Supply and fixing 20W LED tube light Fitting Philips make or equivalent type on wall or ceiling.

Supply and fixing of Down Light fitting (Philips / Bajaj / K.Lite / Crompton Greaves/pasolite) suitable for incandescent lamp with guard and 9 W LED bulb.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 600mm down rod on the existing clamp.

Supply and fixng of TNEB Meter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

P Sivaguru

PV RAJU SONS

vetrivel constructions

NVS and Co

PERUMAL.S.K