PROVISION OF DEFICIENT ROAD FURNITURE AND ASSOCIATED WORK AT MO MB GHATKOPAR UNDER GE NW BHANDUP

Amount

S&F in metal guide post delinators of size 1000 x 110 x 5 mm with twin reflectors, made out of PVC pipe 51 mm dia & 2 plates of plastic metal of dimention 302mm x 167mm fitted with 2 Nos of 110mm dia high reflectivety reflectors and 2 Nos 70 x 23mm rectangular reflectors on each side for excellent reflectivety in dark hours, complete all as specified and directed, Make : Dark Eye Guide post Cat No. Da 74 or equivalent as approved by the GE.

M & L for thermoplastic road marking paint, conforming to BS-3262 applied on road/pavement in lines, dashes, arrows, letters etc not exc 10 cm in width, white or golden yellow of thickness not less than 2mm and retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions using thermoplastic application unit etc, complete all as specified and directed.

M & L for thermoplastic road marking paint, conforming to BS-3262 applied on road/pavement in lines,zeebra lines, dashes, arrows, letters etc exc 10 cm in width, white or golden yellow of thickness not less than 2mm and retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions using thermoplastic application unit etc, complete all as specified and directed.

S&F for reflective Cat Eye (Road stud) of ABS plastic body conforming to INC code 67-3977 having load capacity of 20 Ton (point load) of approx size 110mm x 90mm x 17mm high with reflectors on both side fixed on road surface with approved adhesive all as per manufacturers instructions etc complete all as specified and directed. Make : 3M290 Series or of make Avery Dennison C-80 Series or ARSDM-01 as approved by the GE.

S&F in convex mirror made of polycarbonate of size 80cm dia (Make : Sun eyes Cat No SE-207 or equivalent as approved by the GE) complete including MS pipe, medium grade, 32 mm bore, 2.00metre high (duly painting of external steel surfaces with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) with suitable fixing accessories such as nuts, bolts, washers etc and inserted in PCC 1:2:4 type B-1 (using 20mm graded aggregate) block of size 300mm x 300mm x 500mm with necessary excavation and disposal of soil as per site requirement, complete all as specified and directed.

S&F in portable speed bump PVC spead breaker, 400x500x50mm size including provision of anchor bolts, epoxy morter grout and design, complete all as specified and directed. Make : Pioneer manufacturers and suppliers, Product Code 20 or equivalent of make Dark Eye as approved by the GE.

S&F for Solar Road Stud made out of aluminium housing and precast constrution, solar powered by SIEMENS monocrystal solar panel 2 W 120mA type of battery NI-CD 1.2V 2500m AH & flash rate 2 Hz, view distance over 200 mtr fitted with and including 2 Hz, EL 805-3 pieces on each side on 2 ends total 6 pieces LED's, flashing upto 12 hours of light at night and solar battery automatically charge in day / sun light duly fixed with cement and hardner 125 x 125 x 85mm in red/yellow colours, Make: SOLAR/SIMPSON/EL 805A/ALEXIS 1901/DIGTMAX/3M.

M&L for pre cast cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones setting in CM(1:4), complete all as specified and directed.

M&L for preparation of new surfaces of concrete surfaces of any description over 10cm girth or width and appying two coats of synthetic enamel paint incl one coat of primer all as specified and directed.

S&F retro reflective road sign board various pattern, diamension of board, letter size and colour all as directed by Engr-In -Charge incl fixing in stainless steel frame with double side visbility sheet and 3mm ACP with stainless steel stand complete all as specified and directed.(Note : stainless steel is measured and paid seperately)

Supply only for Stainless steel railing and post of sign boards, special alloy (grade 304) pipe 1.50 mm thick and any dia of pipe, incl necessary cutting , notching organ welding , grinding and drlling counter sunk holes and bending required shape by mechanical means in factory as per requirement without forming wrinkles and butting polishing all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and directed.

M&L for 150 mm thick PCC 1:4:8 type D2 (40mm greded aggregate) as in sub base etc complete all as specified and directed.

M& L for 80mm thick Machine pressed precast paver block M-40 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) etc complete all as specified and as directed Note: sand cushion will be measured separetely. Make - Super tiles/NITCO Tiles/VITCO tiles

Supply only sand cusion for paver blocks, complete all as specified and directed.

Removing Excavated soils exceeding 1.50 KM but not exceeding 5 KM to out side MD land and depositing where complete all as specified and directed.

R K TYAGIS

M/S VISHRANTA CONSTRUCTION

GRAND SERVICES

Shree Ayyappa Engineering