REPAIR/MAINT OF DOOR SHUTTERS IN VARIOUS DANGER BUILDING AND STORES ALONGWITH CONNECTED ITEMS IN WSA AND REPAIR/MAINT OF LT DISTRIBUTION SYSTEM INCLUDING REPLACEMENT OF DISTRIBUTION PANELS AND ASSOCIATED WORK IN SMQ/OMQ AND CAMMOUFLAGE PAINTING OF W

Amount

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) and removing from site, complete all as specified and as directed.

Taking down chowkats or frame, exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutter from the frame) and removing from site, complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and removing from site, complete all as specified and as directed.

S&F anodised aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc including powder coating (minimum thicknessof powder coating 50 micron), complete all as specified and as directed.

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and as directed.

M&L for framed work such as grills,gratings, etc. with ends of barsshouldered and/or riveted or forged into spikes, framedguard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tanks and similar workconforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F factory made for box type steel window side hung double shutters with provision for desert cooler/AC (inside for wire mesh & out side for glass), including guard bar, hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, and painting with one shap coat primer steel window shall be conforming to relevant IS, complete all as specified and as directed. Note:- Wire mesh and sheet glass shall be measured and paid separately.

S&F factory made for box type steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing and painting with one shap coat primer steel window shall be conforming to relevant IS, complete all as specified and as directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

M&L for preparing of newly steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M&L for pressed steel frames factory made for doors out of 1.25mm thick PGI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm, complete all as specified and as directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening, complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and as directed.

M&L for MS holdfast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

S&F 35 mm thick, 2nd class hardwood, plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and as directed.

S&F 35mm glazed and skelton shutters 2nd class hardwood open rebated and prepared to receive the glass, gauge etc(without sash bars) edges of framing plain chanfered or rounded fitted with cut and mitered beads for securing glass/ guage etc, complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290 including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and as directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and as directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and as directed.

S&F for 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type - C-21, complete all as specified and as directed.

S&F for 150mm long aluminium handles, cast type anodised, complete all as specified and as directed.

S&F in repairs, mild steel sliding door bolts, plate type, stove enamellled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250mm, complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and as directed.

M & L for preparing of wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer, complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors with necessary nails and fillets, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for providing 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as specified and as directed..

M&L for rendering 10mm thick plaster in CM (1:3) on brick work for fixing wall tiling, complete all as specified and as directed.

M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, complete all as specified and as directed.

M&L for 450x300x7mm thick glazed ceramic colour tiles on vertical surface set in neat cement slurry and pointed in white or coloured cement, complete all as specified and as directed.

Material and labour for Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neae in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for plain cement concrete type B1 (1:2:4) (using 20mm graded crushed stone aggregate) as in hold fast block incl necessary form work, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition and rubbish off the premises, complete all as specified and as directed

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified and as directed.

S & F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pan, complete all as specified and as directed.

M & L for 6.3mm sheet glass, ordinary quality, in squares exc 0.5 Sqm each pane, complete all as specified and as directed.

S &F in repairs, steel rolling shutters(thickness of laths in 1.25mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and as directed.

S &F in repairs, steel rolling shutters(thickness of laths in 1.25mm) but gear operated type with bevel gear box and crank handle and top box, complete all as specified and as directed.

S &F in repairs, steel rolling shutters(thickness of laths in 1.25mm) but gear operated type with chain wheel and hand chain and top box, complete all as specified and as directed.

S &F safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed.

S &F ball bearing for rolling shutters, complete all as specified and as directed.

M & L for greasing to rolling shutters of any size including cleaning, making rust free & easy for movement, complete all as specified and as directed.

M & L for maintenance of LT ACB of rating up to 630 Amp 415 Volt 50 HZ of any make installed at LT panel boards complete by taking the shut down with prior intimation and cleaning the ACB by using air blower tightning of connection of control circuit and complete checking of all fuses, checking relay and control circuit for smooth functioning by employing one skilled tradesman as and when required and also to carry out following works . Note: (i) Unit rate include for preventive maintenance / attending break down as and when required. (ii) Check and clean incomming and out going terminals / compartment. (iii) Checking the servicebility of close and trip coil condition and taking out for repalcement. (iv) Checking the servicebilty of control circuit, relays ,fuses and Electrical /Mechanical interlocks. (v) Replacing the spares such as shunt release, UV release, tripping/Closing coil shall be measured and paid seperately under respective item. (vi) Rate quoted deemed to be including cost of replacing small piece of control circuit wires up to 1.00 Mtrs, LT fuses and push buttons for ON/Off if required .

Supply and fix in repair shunt release for LT ACB 415/240 Volt AC up to 630 Amp, complete all as specified and as directed. Make : L & T/GE/Havell's/English Electric

Supply and fix in repair under voltage release 415/230 Volt suitable for LT ACB of rating up to 630 Amp, complete all as specified and as directed. Make : L & T/GE/Havell's/ English Electric

Supply and fix in repair current transformer of following rating, indoor type, insulated ring type in existing panel includintg taking down old unserviceble CT's of any make /rating for CT ratio 200 /5 Amps, complete all as specified and as directed. Make :AE/Kappa/PGR

All as per ser item No. 45 here in before but CT ratio 500 /5 Amps, complete all as specified and as directed.

All as per ser item No. 45 here in before but CT ratio 1000 /5 Amps, complete all as specified and as directed.

M& L for surface dressing to E/M installations, 1.5M from out side of fencing, E/M store yards of following area not exceeding 15cm deep getting out soft/loose soil removing shrubs, small trees height up to 1.0M, removing the grass from route and cleaning the fencing by removing small trees/vegitation on fencing at following areas:- (i) Main receiving station inside the captive power house (ii) KV sub stn (iii) OMQ sub stn (iv) RS sub stn (v) Tipnis sub stn, complete all as specified and as directed. Note : (i) Rate includes removing all waste material and grass not exceeding 50Mtrs distance from installation ,depositing where directed at a level not exceeding 1.5Mtrs above the starting point and cleaning of yard.

Supply and fix fire retardant insulated synthetic mat for 1100 Volt of 2.5mm thick +/- 10% conforming to IS 15652:2006, tested for breakdown strength, ageing properties, insulation resistance, effect of acid,Alkaline, diesel & transformer oil, leakage current test, fire test etc having the width of 1000mm +/-20mm complete as required sutable and using adhasive and alied chemical and scaling of all part s of all joints and border ends and fixing, complete all as specified and as directed.

Supply and fix in repair LED type piolet lamp suitable for working voltage range up to 240 Volt AC, complete all as specified and as directed. [Make : Neptune/L&T/Vaisnavo/C &S/HPL]

M & L for cutting the tree branches at a distance not exceeding 2.0Mtrs way from LT distribution lines, of tree branch size up to 80mm dia as directed and deposited the removing branches at a distance not exceeding 100Mtrs from road /path, complete all as specified and as directed. Note : Each pole locations/distance between two poles maximum up to 30Mtrs is considred as one job irrespective of number of for cutting tree branches for over head lines .

S& F in repair on load change over switch of 200 Amp , 4 pole in existing panel with necessary modification in bus bar arrangemment if required, complete all as specified and as directed. Make: L & T/ Havells/ABB/Schneider

Supply, install, test and commissioning of outdoor type LT feeder piller box made out of 3.0 mm thick CRCA sheet out door type, CPRI approved, totally enclosed weather dust and vermin proof as per IS with front and rear 200 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary made out of 50 X 50 X 6mm angle iron grouted at floor above 30cm from ground level comprising the following including taking down old unserviceble feeder piller box, including taking down old existing panel board, complete all as specified and as directed. Note: Cost includes necessary internal wiring for meters, CTs, indication lamps, etc and rigid bus bar connections from bus bar to MCCB including the following accessories Incoming (i) MCCB 100 Amp 4 pole 16 KA - 01 No. as incomming. (ii) Multi function meter 01 No Make: L & T /HPL/ABB. (iii) LED type Indicating lamps -03 Nos [Make:C&S/Neptune/L&T/ Vaisnavo] Outgoing (i) MCCB, 4 POLE, 63 Amps, 16 KA - 08 No. (ii) MCB, DP 32 Amps, 10KA - 01 No.

Supply, install, test and commissioning of Outdoor type LT Feeder piller box made out of 3.0mm thick CRCA sheet out door type , CPRI Approved, totally enclosed weather dust and vermin proof as per IS with front and rear 500 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary made out of 50 X 50 X 6mm angle iron grouted at Floor above 30 cm from ground level Comprising the following includint taking down old unserviceble feeder piller box, including taking down old existing panel board, complete all as specified and as directed. Note: Cost includes necessary internal wiring for meters, CTs, indication lamps, etc and rigid bus bar connections from bus bar to MCCB including the following accessories. Incoming (i) MCCB, 4 POLE, 160 Amps, 36 KA 01 No. (ii) Multi function meter 01 Nos CT as per incoming rating. (iii) LED type Indicating lamps -03 Nos [Make:C&S/Neptune/L&T/ Vaisnavo] Outgoing (i) MCCB, 4 POLE, 160 Amps, 25 KA 01 No. (ii) MCCB, 4 POLE, 100 Amps, 16 KA 01 No. (iii) MCCB, 4 POLE, 63 Amps, 16 KA 04 No. (iv) MCB, SPN/DP , 63 Amps, 10KA 01 No. (v) MCB, TPN 63 Amps, 10KA 01 No.

Supply, install, test and commissioning of Outdoor type LT Feeder piller box made out of 3.0mm thick CRCA sheet out door type, CPRI Approved ,totally enclosed weather dust and vermin proof as per IS with front and rear 400 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary made out of 50 X 50 X 6mm angle iron grouted at Floor above 30 cm from ground level comprising the following includint taking down old unserviceble feeder piller box, including taking down old existing panel board, complete all as specified and as directed. Note: Cost includes necessary internal wiring for meters, CTs, indication lamps, etc and rigid bus bar connections from bus bar to MCCB including the following accessories. Incoming (i) MCCB, 4 POLE, 160 Amps, 25 KA for incoming 01 No. (ii) Multi function meter 01 No. CT as per incoming rating (iii) LED type Indicating lamps -03 Nos [Make:C&S/Neptune/L&T/ Vaisnavo] Outgoing (i) MCB, SPN/DP , 32 Amps, 10KA 10 Nos. (ii) MCB, TPN 63 Amps, 10KA 01 No.

Supply, install, test and commissioning of outdoor type LT Feeder piller box made out of 3.0mm thick CRCA sheet out door type, CPRI Approved ,totally enclosed weather dust and vermin proof as per IS with front and rear 500 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary made out of 50 X 50 X 6mm angle iron grouted at Floor above 30 cm from ground level Comprising the following includint taking down old unserviceble feeder piller box,including taking down old existing panel board, complete all as specified and as directed. Note: Cost includes necessary internal wiring for meters, CTs, indication lamps, etc and rigid bus bar connections from bus bar to MCCB including the following accessories. Incoming (i) MCCB, 4 POLE, 250 Amps, 36 KA 01 No. (ii) Multi function meter 01 No. CT as per incoming rating. (iii) LED type indicating lamps -03 Nos [Make:C&S/Neptune/L&T/ Vaisnavo] Outgoing (i) MCCB, 4 POLE, 160 Amps, 25 KA 03 Nos. (ii) MCCB, 4 POLE, 100 Amps, 16 KA 01 No.

Supply and fix MCCB 415 V of 63 Amps 4 pole 16 KA capacity, complete all as specified and as directed. Make: Indo Asian /Legrand /L & T /Standard/Havell's

All as per ser item No. 57 here in before but 100 Amps 4 pole 16 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 125 Amps 4 pole 16 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 160 Amps 4 pole 16 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 200 Amps 4 pole 25 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 250 Amps 4 pole 25 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 320 Amps 4 pole 36 KA, complete all as specified and as directed.

All as per ser item No. 57 here in before but 400 Amps 4 pole 36 KA, complete all as specified and as directed.

M & L for cleaning the LT feeder piller box indoor/ out door type of size up to 3 Mtr X2 Mtrs X0.5 Mtrs of different raing bus bar up to 800 amps , after dismatling the Incomming and out going connections from MCCB/ Bus bar and replacing the old unserviceble nut,bolts, supporting insulaots etc and check the servicebility of MCB/MCCB, , earth continuity conductor , tightning the earth conductor and incomming and out going cables and removing existing old insulation of bus bar and MCCB/ MCB terminals and providing new insulation tape of standard quality applied to Bus bar and MCCB terminals and cleaning the feeder piller box, complete all as specified and as directed. (Note: (i) Contactor has to take the Shut down of LT panel before starting the job and switch on the panel after completion of work all as as directed. (ii) Cost of T & P also included in quated rate ) .

Supply and fix junction box made from SMC sheet ready made of size 350 X 270 X 200mm with aluminium bus bar of 150 Amp capacity for RYB and neutral fixed inside the junction box with necessary supporting insulators fixed on hylem sheet /Insulating sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole /Wall with MS clamp 25 X 5 mm and nuts & bolts,and connecting cables from junction box to fittings, complete all as specified and as directed.

All as per item No 66 but size 400 X 300 X 200mm and bus bar capacity 200 Amps, complete all as specified and as directed.

S & F LED post top 20/25 W luminaire die cast housing and decorative circular design with polycarbonate opal diffuser reflector of IP 65 protection, resistance to corrsion with all fixing arrangements fixed to post top complete including taking down old unserviceble fitting of any type and depositing to store for credit, complete all as specified and as directed. Make: Havells cat No - RUBY 2PT25WLED830PSYMTOPC or equivalent of Bajaj / Philips/Surya

supply and fix for repair of integral decorative bollard with 09 W Rectangular shape victorian design with opal acrylic diffuser and IP 65 protection complete with PCC work 1:2:4 of adequate size for installed of bollard fitting, complete all as specified and as directed.Make - Bajaj CP No BGBOS600 9W LED WW or equivalent of / Crompton/ Havells

M&L for graded crushed stone aggregate of size 40mm, complete all as specified and as directed.

M&L for graded crushed stone aggregate of size 20mm crushed stone, complete all as specified and as directed.

supply and fix for water proof LED strip light 25 W with driver warm white/tricolour with high brightness out door application IP 65 ,Stick on high mast pole/pole/wal crushed stone, complete all as specified and as directed.

supply and fix for LED strip driver IP 65 25 W, Stick on high mast pole/pole/wal crushed stone aggregate, complete all as specified and as directed.

M & L for preparation of surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall incl cornices etc and applying one coat of white wash upto four storeys , complete all as specified and as directed.

All as per item No 79 here in before but applying one coat of oil bound distemper on wall, complete all as specified and as directed.

All as per item No 79 here in before but applying one coat of white washing on ceiling, complete all as specified and as directed.

M & L for preparation of old painted surfaces of wall, chajja, fascia, cornies, parapet etc and applying one coat of exterier emultion paint upto four storeys height, complete all as specified and as directed.

All as per item No 82 here in before but height exc 10m and n.exc 20m for RCC overhead structures like OHT etc, complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description, not other wise described, over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M & L for preparation of old painted steel/iron surfaces of any description, not other wise described, over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M & L for preparation of old painted steel/iron surfaces of any description, not other wise described, over 10cm width or grith and applying one coat of aluminium paint, complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises, complete all as specified and as directed.

Material & labour for rendering 15mm thick in cement mortar (1:4) in two layers (10mm thick in first layer and 5mm thick in second layer) finished even and smooth (without using extra lime or cement) mixed with water proofing compound as per manufacturer’s instructions in top layer, complete all as specified and as directed. (Note : WPC will be measured & paid separately)

Supply only liquid water proofing compound approved quality, complete all as specified and as directed.

M & L for finishing walls with acrylic smooth exterior paint (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. Note: An amount of Rs.36085.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

BHARAT ELECTRIC

M/S ROY ENTERPRISE

M/S. NARENDRA KUMAR GARG

Hanuman Prasad Agarwal

Shri T P ANIL KUMAR

SHRI PARTHA DUTTA

M/S. JOGINDER KUMAR GOYAL