83948/E8 ADDN/ ALTN TO AIRMEN BILLETS NO. L-6, L-7 AND L-8 AT AF STN CHABUA UNDER GE (AF) CHABUA

Amount

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling timber in scantling 40 Sqcm and over in section in framed work in any position complete all as directed.

Dismantling timber in scantling 40 Sqcm and over in section in unframed work in any position complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in bearing/ bed plates, coping, kneelers, apex stones, kerb stone etc. including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Supply and fix for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix for mild steel gusset plates including necessary welding, drilling for fixing conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with 'L' type, 'J' type or cranked hook bolt or with self tapping screws with two corrugation side lap complete all as specified and as directed.

All as per serial item No.10 here-in-before but plain sheets as in ridges, gutters, facia etc.

Material and labour for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T' section of size 38mm X 24mm X 0.40mm thick and wall angle of size 24mm X 24mm X 0.30mm thick and cross 'T' of size 24 X 24 X 0.43mm thick with (using 60 cm x 60 cm E-board classic 4mm thick ceiling board) to be placed in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning dufuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1200mm cross 'T' to be inter locked between main runner @ 610mm C/C so as to form 600mm x 600mm grid complete all as specified and as directed.

Demolition of PCC in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc. complete all as directed.

Material and labour for brick work with locally available best quality sub class ‘B’ brick, old size, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces in two layers (10mm + 5mm) mixed with integral water proofing compound @ 3% by weight of cement with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Material and labour for brick work with locally available best quality sub class ‘B’ brick, old size, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Supply only integral water proofing compound.

Material and labour for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding and welded with angle iron including all laps, cutting and waste complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats cement base paint over a coat of primer complete all as specified and as directed .

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for scrapping down old wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for scrapping down old wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in slab supported on wall beams and columns in floor, roof landings balconies, canopies, deck slab and in shelves and the like complete all as directed.

Material and labour for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Material labour for RCC (1:2:4) type B1 (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick for fair finished flat surfaces of concrete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 5 cm but n.exc 10 cm wide for fair finished complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20 to 25mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 15 mm thick in cement mortar (1:6), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20 to 25mm thick as in vertical surface such as skirting and dado, jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including backing coat of 10mm thick in cement mortar (1:3) including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection complete all as specified and as directed.

Material and labour for forming construction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as directed.

Supply and fix for 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in shelves including necessary fixing arrangements on walls complete all as specified and as directed.

Supply and fix for pressed steel frames of size 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate ISI marked fixed with wooden scantling/ supports etc complete all as specified and as directed .

Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded broken stone aggregate) as in filling door and window frames any size single or double rebated including arrangement for fixing of hinges and fixtures as required complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class HW factory made plain frame, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and the size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc. divided in square with plain, edges of framing plain, chamfered or rounded mitred and rebated sash bars any number, fitted with cut and mitred beads for securing glass,etc; complete as specified in SSR Par-I, Section 8, clause 8.24 (a) and as directed.

Supply and fix for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including guard bars/ grills and necessary arrangements to fix with wooden scantling/ supports etc complete all as specified and as directed.

Supply and fix for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/ grills and necessary arrangements to fix with wooden scantling/ supports etc complete all as specified and as directed.

Supply and fix for steel ventilator with top hung shutter including hinges, steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/ grills complete all as specified and as directed.

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Material and labour for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed .

Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for 150mm size aluminium handles, anodised, cast type complete all as specified and as directed.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for post construction antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Material and labour for post construction antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick of on vertical faces and pattern as approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 15 mm thick in cement mortar (1:6) complete all as specified and as directed.

Supply and fix for hat and coat hooks, solid aluminium body for 175mm to 250 mm and fixed to boarding/ shelves complete all as specified and as directed.

Supply and fix for brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fixed in repairs for vitreous China water closet (squatt pattern), ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)complete including provision of lime concrete bedding (1part lime, 2 part sand and 5 part coarse aggregate) minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing including connection to trap and flushing pipe, anti syphonage pipe and making good to floor complete all as specified and as directed.

Supply and fixed in repairs for Vitreous China wash down water closet pan (pedestal pattern), coloured including two Nos fixing bolts, PVC seat cover, 'P' or 'S' trap ( excluding flushing cistern and flush pipe) and making good the disturbed floor complete all as specified and as directed.

Supply and fixed in repairs for 10 litres capacity including all fitings PVC valveless, syphonic action type, flushing cistern, high or low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix for 15mm dia PVC connection with brass nut on both ends and washers 450mm long complete all as specified and as directed.

Supply and fix in repairs for bib taps, CP brass fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and as directed.

Supply and fixed in repairs for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15mm dia complete all as specified and as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply and fixed in repairs for vitreous China wash hand basin, white, oval shape of size 550 mm x 410 mm x 195 mm, waste coupling fittings and PVC waste pipe and all fittings complete all as specified and as directed.

Supply and fixed in repairs for 15 mm dia bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs for 15 mm dia bore cast copper alloy chromium plated angle cock/ stop cock with long shank and cup (concealed type) screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixed in repair for 15 mm dia bore chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixed in repairs for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fixed in repairs for 25 mm dia aluminium drapery/ curtain rod natural wdn finish and wooden ornametal attachment bracket two Nos at both ends and matching curtain rings min 8 Nos in one metre complete all as specified and as directed.

Supply and fix for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixed in repairs for CP tubular towel rail, 20mm dia, 60cm long fixed with CP screws and wooden cleats/ rawl plug in wall complete all as specified and as directed.

Supply and fixed in repairs for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixed in repairs for vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Demolition of stone slabs laid bedded and pointed in any mortar and tiles of any description or thickness in floors, aprons etc complete all as directed.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and fixed in repairs for 15 mm dia wall mixer with bend all as per Code No.CL-5078 of make Sona Super (classic) or equivalent, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold with long screwed shank and fly nuts screwed for iron pipe complete all as specified and as directed.

Supply and fix for 1000 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion all as specified in SSR Part-I including 20mm size brass float valve, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule including dismantling water tank, float valve and removing to storecomplete all as specified and as directed.

Supply and fixed in repairs for 20mm bore dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fittings such as switches, ceiling rose, pendent, regulators etc) with or without conduit, casing & capping and removing material to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floor etc. complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed multistranded FRLS cable 1100 volts grade, ISI-694 marked drawn through and including medium grade ISI marked, 20mm size PVC casing and caping including all accessories etc, with pressed steel terminal box powder coated of suitable size with 3mm thick plastic laminated sheet by using CP machine screws for housing switches/ sockets/ regulators etc and making good to match with existing finishes including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.90 here-in-before but for ceiling/ exhaust fan point.

All as per serial item No.90 here-in-before but point wiring for one 3 pin 5 Amps socket outlet on independent board.

All as per serial item No.90 here-in-before but point wiring for one 3 pin 5 Amps socket outlet on same board.

All as per serial item No.90 here-in-before but with 2.5 sqmm copper wire for power point.

Supply and fix for ceiling rose, 2/3 terminals, PVC/ polycarbonate type, isolated body suitable ISI marked complete all as specified and as directed.

Supply and fix for switch socket combination, 2 in 1, 5 Amp flush type universal complete all as specified and as directed.

Supply and fix for socket out let 3 pin 5 Amps flush type complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 5 Amp complete all as specified and as directed.

Supply and fix for switch socket combination 5 Amps/ 16 Amps, 5 in 1, flush type universal complete all as specified and as directed.

Supply and fix for fan regulator, electronic rotary type, 5 steps, 240 volts complete all as specified and as directed.

Material and labour for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with unsheathed multistranded copper conductor of size 4.0 sq. mm nominal area and drawing through and including suitable size medium grade casing and capping and accessories ISI marked including one run of PVC insulated 4.0 Sqmm (nominal area) unsheathed multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of casing & capping will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with unsheathed multistranded copper conductor of size 6.0 Sqmm nominal area and drawing through and including suitable size medium grade casing and capping and accessories ISI marked including one run of PVC insulated 6.0 Sqmm (nominal area) unsheathed multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm earth continuity conductor and one run of casing & capping will be measured as one unit)

Taking down old unserviceable DBs of any type and capacity complete all as directed.

Supply and fix for sheet metal enclosure DB TPN 4 way vertical loadline, with 200 Amps rated bus bar 415 volts double door, neutral links, blanking plates suitable for fixing of MCCB as incommer and MCB for outgoing complete all as specified and as directed.

Supply and fix for MCCB, 4 poles, 63 Amps with breaking capacity 25 KA, adjustable overload setting 0.8-1.0 x In, adjustable short circuit settings 6-10 x In, AC 415 volts, 50 Hz conforming to IEC:60947-2 and connecting complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 32 Amps, 'C' curve, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 6 to 32 Amps, 'C' curve, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

Supply and fix for LED light fitting 20 watts with LED tube including LED tube light (retrofit type) all as per Cat No.REGAL BATTEN 8 UPTO 1X22 W SSBS WH + PHOTON ULTRA 2.01213 T8 SSTL 20W LED 865 SPC OF MAKE Havells or equivalent make specified in PS, connecting up with suitable size three core twisted flexible copper conductor cable from ceiling rose to fitting including taking down unserviceable existing tube light fitting complete all as specifed and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, with MS angle iron frame, cast iron cover with locking arrangement, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables 1100 volts grade with stranded aluminium conductor with cable glands, lugs etc laid in trenches, fixed on wall/ pole of size 16 Sqmm 4 core complete all as specified and as directed.

Supply and fix for blanking plate complete all as specied and as directed.

Supply and fix for heavy duty exhaust fan 380 mm sweep, 230 volts, 50 Hz, 1400 RPM single phase with insect preventive net out side of the fittings all as per Cat No.Turbo Force TP of Havells or equivalent in Crompton/ Khaitan make complete all as speified and as directed. Note: Old unserviceable fan will be deposited at MES store yard.

Supply and fix for energy saving ceiling fan of 1400 mm sweep, 230 volts all as per Cat No.Velocity ES-50 ISI marked of make Havells or equivalent as make specified in PS complete all as specified and as directed. Note: Old unserviceable fan will be deposited at MES store yard.

Supply and installation electrical driven water heater storage type 50 litres with all accessories including taking down old unserviceable gyser complete all as specified and as directed. Note: Old unserviceable gyser will be deposited at MES store yard.

Supply and fix heavy duty hot and cold flexible pipe with both side flair nut for 20 mm and 600 mm long connecting with GI pipe complete all as specified and as directed.

Supply and fix for 15 mm dia bore bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

LESS SCHEDULE OF CREDIT (NOTE : The bidders are required to quote the same amount as inserted in estimated rate column against the group of credit items. For details refer Schedule of Credit including notes therein of tender documents.

M/s PRABIR ENTERPRISE

M/S P R SINGH AND SONS

M/S R G Construction

Raj Traders

Garg Brothers

M/s N.T. Enterprises

AMIT ASSOCIATES

M/s Matadeen Ramchandra Agarwal

S.M.CONSTRUCTIONS

POONAM ELECTRIC INDUSTRY