8825/TOKEN-104/2025-26

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified

M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.

M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

M&L for mild steel works as in angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including al necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F of Fe 410-W Gde -E- 250 quality (A) Mild steel in flat, round or square bars, in available lengths complete all as directed.

S&F Mild steel screw sbolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ene to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck 11mm to 15mm complete all as specified and directed.

M&L for preparing new or previously untreated steel/iron surfaces of any description not otherwise described n.exc. 10 cm in width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only Chain link MS galvanisd fencing, any size or type

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

M&L mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.

M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L PCC 1:2:4 type B1 using 20mm aggregate in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for

M&L cement concrete type C2 (1:3:6) using 40 mm greded stone aggregate as in foundations filling for post holes and mass concrete complete all as directed.

Cutting channels, grooves or rebates n exc 15 cm girth, and trimming surface with reiforcement

M&L Cement concrete ( 1:3:6) type C- 2, using (40mm graded stone aggregate) 75 mm thick as in sub base complete all as directed.

S&F Machine pressed precast concrete interlocking coloured paver block of approved pattern shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade all as directed at site.

M&L for coloured ceramic tiles of size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed.

M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed.

M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm / 300x450 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for 18-20mm thick coloured granite stone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite.

M&L reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). complete all as specified and directed.

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.

Taking down Chowkats or frames not exceeding 1.5 Sqm each(without taking off shutters from the frames) all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

S&F 100mm size butt hinges, medium weight cold rolled complete all as specified.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified.

S&F in repair of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified.

S&F in repair of 110 mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified.

Taking up or down 15 mm dia GI tubing and connections complete all as specified.

Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed

S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.

S&F bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore dia complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

M & L cement concrete 50 mm thick type D-2, 1:4:8 (40mm graded aggregate) complete all as specified and directed by Eng-in-charge.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Eng-in-charge.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Eng-in-charge.

M& L PVC moulded cement concrete Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 complete all as specified and as directed.

M&L Sand filling, Cushioning, watering and consolidation for paver block tiles over subbase all as spd and directed

S & F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr-in-charge.

S & F for anodised aluminium frame (minimum 50 micron powder coating) for doors windows ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed by Engr in charge

S & F Aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium saction weighing 0.55 Kg/Sqm including necessary jointing cleats glazing clips bidding rubber neoprene packing hangles, two nos in each door hinges,tower bolt etc anodised aluminium snap beading screws complete all as specified. NOTE- shutter will be fixed with deco grill ,no extra payment wll be paid out for deco grill

S & F stainless steel wire cloth (SS304 grade) 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples with wooden/aluminium beads/screws to window/door complete

S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs

“S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge

S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 450 W (Gde E-250 quality A)

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete all as specified and directed .

Dismantling fencing wire mesh, any type and in any position all directed by Engineer-in-Charge.

Rough execavation n. exc 1.5 m deep and getting out in soft/ loose soil.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

Demolition of PCC/Concrete of any description and in any position not otherwise specifically provided for

M & L for reinforced cement concrete 1 :2:4 type B-I nominal mix design for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S&F 75mm size fancy type stainless steel handle, cast type, polished bright, complete all as specified.

Dismantling boarding , any description, fixed in any position with screws complete all as specified

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate fininshing the concrete surface even and fair.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceavle tiles to store and rubbish off the premises .

S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge

S&F CP brass shower rose 250mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Supply and fix PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.

S & F 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repairs 15 mm dia Brass CP mixer Swan Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including of dismantling pvc water tank complete all as specified and directed.

S&F in repair vitreous China coloured European type WC with (single piece) wall / floor mounted including Vitreous china coloured 10 ltrs capacity cistern connection to drain,'P' trap or S trap and fixing bolts ,plastic water closet seat cover complete all as specified.

S & F Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body all as specified and directed.

Supply & fix in repair CP connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified.

S&F in repairs vitreous chinaware coloured wall hung wash hand basin with full pedestal of size 550mm x 480mm complete including , CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in repair fancy type brass chromium plated soap dish, complete all as specified.

S&F in repair CP grating 125mm dia, complete all as specified.

S&F in repair aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S&F in repair chromium plated quarter turn brass 2 way bib cock (two in one) suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed.

S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified

S&F MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through PVC conduit , including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box / M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- complete all as specified and directed by Engineer in charge.

All as per item No 101 but One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

All as per item No 101 One bell point controlled by one bell push.

All as per item No 101 One light/fan point controlled by one way switch

All as per item No.101 herein before but with 2.5 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 2.5 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 6 & 7 : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing&caping/Existing conduit to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.

S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified.

M&L bell electric (ding dong) 230 volt, SP all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate, isolated body with three terminals.

S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 100lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:65 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low voltage protection along with a surge protection of 4 KV internal including provision of sutable dia GI light grade pipe1.2 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

Supply and fix loop in /loop out box of suitable size PVC moulded terminal box with locking arrangement comprising of one 4 way conncetor all as specified and directed

Supply and fixing Garden/bollard light of integral decorative with suitable for LED bulb of height not less than 0.6 meter with suitable for single phase 230 volts 50 HZ AC Supply including LED bulb for Dome WHITE , and painted, making foundation for garden light size 250mmx250mmx400mm cement work complete all as specified and directed .

Supply & fix LED Post Top latern lights ,25W ,single phase with decorative LED post top latern lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire,copper conductor of 0.5 Sqmm from light fitting to loop in box complete all as specified and as directed.

S&F MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete Note:-(i) MCB shall be measured & paid separately (ii) make of DBs & MCB should be same

S&F MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply,laying PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete.

S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 32 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed.

Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in hard/dense soil soil soil complete all as specified

Taking down carefully copper/aluminium point wiring (light/fan/ socket/power) complete from the wall by cutting/ chasing including fittings and fixtures such as switches, ceiling roses, pendants holder, regulators,sockets,light fittings etc for credit and making good the disturbed surfaces of wall, floor etc complete all as specified and directed.

Taking down carefully sub main wiring of any description.

M&L switch Modular type 16 Amps 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.

Supply and fix LED batten luminaire surface mounted , 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>70, Power Factor > 0.9, , colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications,, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltr having heating element 1.5 KW and not less than 5 star rating.

S&F Ventilating Fan 200 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

M&L for heavy duty exhuast Fan 230 mm sweep, 1400 RPM, metallic body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

S&F wall mounted angular Electric chimney black colour of suction power not less than 1050 Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting it can open upto at least 20 feet as per site required complete all as specified and as directed by Engr-in-Charge. Note:- In case if any slab/RCC portion obstructs the installation of chimney, then all the work from removing / breaking it properly to plastering the wall and white wasing it will be done in the rate of this job.

S&F of AC Box consisting of 20 Amp multipower socket including MCB of capacity 25 Amp mini MCB, ‘C’ curve, single phase 240 V, AC including modular box, frame, cover plate including plug top with indicator complete all as specified and directed by Engr-in-Charge

M & L for Point wiring (concealed) for Instant geyser control with switch complete with 4 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multi stranded copper conductor drawn through in and including non metallic medium grade rigid PVC conduit, ISI marked not less than 20 mm dia including all accessories concealed in wall by cutting chases and including provision of 4 sqmm PVC insulated copper cable FRLS unsheathed as earth continuty conductor including fabricated branded modular metal flush box duly make embossed, concealed in walls and with suitable modular inner and outer plate for housing switches etc, including 25 amp Modular switch complete all as specified and as directed Note :- S&F switch modular type 25 Amps, 1 module 230 V, AC complete all as specified are deemed to be quoted rate.

M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. (2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible.

S&F Instant Hot Water Geyser 3 Ltrs capacity,3 KW with corrosion proof thermoplastic external body ,ISI approved with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection complete all as specifiedand directed by Engineer -in-charge.

S&F Automatic water pressure pump for hot water circulation and compatible with Washing machine , RO, Shower, Geyser , energy efficient, compact design, irom material , noise less operation , convenience of automatic flow operation , single phase 230 V, 50 Hz , including all fitings and fixtures suitable for existing water pipe line and fitted complete all as specified and as directed by Engr-in-Charge.