Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.4 L
EMD Value
₹7,400
Closing Date
21 Oct 2025, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The DGM STC MPMKVVCL GUNA
O/o The DGM STC MPMKVVCL Railway Station Road Power House Campus Guna (M.P.)
Estimate for Electrification of 01 No. Habitation Umariya 18 Nos. House Hold Under P.M Juga under Ruthiyai dc. Under ONM Raghogarh.
2025_MKVVC_454931_1
DGM/STC-STM/GNA/2025-26/ 45/2039 GUNA dt 29.09.2025
Open Tender
Electrical Works
Percentage
90 days
The DGM STC MPMKVVCL GUNA
Please Refers tender Document
3 documents required · 3 mandatory
₹590
₹7,400
29 Sept 2025
29 Sept 2025
22 Oct 2025
29 Sept 2025
21 Oct 2025
29 Sept 2025
29 Sept 2025 - 21 Oct 2025
Provision :- Schedule A-11 KV Line - 0.42 Km. Schedule B- 11 KV DP Strc. - 01 No. Schedule C- 1x63 KVA DTR - 01 No. Schedule D- LT Line - 0.90 Km. Schedule E- DTR Fencing Schedule F- Service connection
140 kg. 8.0 mtr. Long PCC Pole
140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] (Including with Transportation from Area store Guna/Gwalior/ Bhopal to working Site)
Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm
Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire
11KV Polymer Pin Insulator
Labour Charges for Fixing of 11KV Polymer Pin Insulator
Stay Set Complete Without Stay wire 16 MM (Painted) Complete
Stay Set Complete Without Stay wire 16 MM (Painted) Complete erection including pit digging binding of stay wireat eye bolt, stay insulator and anchor rod & tighting on pole
Stay Wire 7/3.15 MM. (7/10 SWG)
Clamp for 140 KG PCC Pole MS Flat 50x6 MM
Stay Insulators 90X65mm
Back Filling of Poles with boulders
G.I. Wires 4.0 MM (8 SWG)
Labour Charges for G.I. Wires 4.0 MM (8 SWG)
Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole
Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Labour Charges for Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Red oxide paint
Labour Charges for Red oxide paint
Aluminium Paint
Labour Charges for Aluminium Paint
M.S. Nut and bolts
11 KV Danger Boards Enamelled
Labour Charges for 11 KV Danger Boards Enamelled
11 KV V Cross arms
Labour Charges for Fixing of 11 KV V Cross arms
11 KV Top Clamp
Labour Charges for Fixing of 11 KV Top Clamp
Labour Charges for fixing of 11 KV(45KN) Composite Polymer Disc Insulators with Strain Hardware Fittings
11 KV Strain Hardware Fittings
AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)
Stringing of AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)
Horizonatal and Cross Bracing with 8' Centre supporting clamps on both the poles.
Erection Charges for fixing of 8' Centre Horizonatal and Cross Bracing with supporting clamps on both the poles.
DC Cross-arms 8' Channel (100x50x6MM) along with strain plates, clamps
Erection Charges for Fixing of DC Cross-arms 8' Channel (100x50x6MM) along with strain plates, clamps
Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm
Labour Charges for Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
Labour Charges for Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
Back Filling of Poles with boulders.
Three Phase Service connection box(Deep Drwan Metal/SMC Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector including with Labour Charges
XLPE Cable 1 core unarmoured 25 sqmm Aluminium conductor 1100 Volts
Stringing of XLPE Cable 1 core unarmoured 25 sqmm Aluminium conductor 1100 Volts
Shackle Insulators 90x75 MM
11/0.4 KV Distribution transformer 63 KVA (Conventional) Rep-WGP)
11/0.4 KV Distribution transformer 63 KVA (Conventional) Rep-WGP) Handling & Installation of Distribution Transformer (DTR) on DP, tightening with turn buckles on both sides, poles clamping and boting of base jumpering on HT side (Including hydra charges in urban area and chain pully charges in rural area)
11 KV D.O. Fuse Unit Polymer type
Erection charges for fixing of 11 KV D.O. Fuse Unit Polymer type
Concreting of structures & foundation (1:3:6)
Labour Charges for Concreting of structures & foundation (1:3:6)
Complete jumpering of DTR with erection charges
Bi-metallic clamps Distribution Transformers Bushing
Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC
LT Distribution box with isolator on incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator &Amp; 6 SP of 60 Amp.)
LT Distribution box with isolator on incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator &Amp; 6 SP of 60 Amp.) Handling & Installation of Meter cum protection box on DP, complete wiring, connecting LT cable on bushing and LT feeders (2 Nos.)
G.I. STRIP 25X3 MM1
G.I. Strip 25x3 mm. for laying complete earthing including welding and back filling
G.I.Pipe 40 mm Dia C grade type
G.I. Pipe 40 mm dia errection with pit digging & back filling
Bentonite compound powder
Galvanized nut & bolt with washer
6 Lowpan Meter 3-Phase 4 wire, 10-60 Amp Accuracy class 1 Static Electronic, With 1 Optical Port and 1 LPRF Port Suitable for Locat Communication with CMRI, With Meter with Box
Handlingi and installation charges for fixing of 6 Lowpan Meter 3-Phase 4 wire, 10-60 Amp Accuracy class 1 Static Electronic, With 1 Optical Port and 1 LPRF Port Suitable for Locat Communication with CMRI, With Meter with Box
9 KV Gapless type (5 KA) Polymer Lightening Arrestor for 33/11 kv S/s type
Erection Charges for fixing of 9 KV Gapless type (5 KA) Polymer Lightening Arrestor for 33/11 kv S/s type
XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts
Stringing of XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts
Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels
D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
Erection Charges for fixing of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
Transformer mounting Channel (100X50x6 mm.)
Erection Charges for fixing of Transformer mounting Channel (100X50x6 mm.)
D.O.Mounting Channel 75x40x6mm
Erection Charges for fixing of D.O.Mounting Channel 75x40x6mm
DTR S/s Fencing (31 Feet) of 5' Barbet Fencing on PCC Support of 7 No, 6' Height
DTR S/s fencing (Total 31 feet running meter max. ) of 5' height barbet wire fencing on PCC support of 7 Nos. 6', height with foru bar hit bar round shall be in fencing
Double Gate (2No-2.5'X5x) Set of MS Angle (25x25x4MM) with mesh & amp: looking
Errection of Double Gate(2No.-2.5'x5x) of MS angle (25x25x4mm.) with mesh & locking arrengement
3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E including with Erection Charges
Switch Board including with Erection Charges
Wooden Board 10"x8" including with Erection Charges
Rack Bolt/Screw including with Erection Charges
G.I. Wire 3.15 mm. (10 SWG) including with Erection Charges
PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR including with Erection Charges
Stringing of PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR including with Erection Charges
Single phase Electronic meter with data downloading facility & box 5-30 Amps.
Handaling and installation charges for fixing of Single phase Electronic meter with data downloading facility & box 5-30 Amps.
LED Lamp with 9 Watt (Complete) including with Erection Charges
MCB of 16 Amp of (ISI Mark) including with Erection Charges
PVC/Rubber Bushes including with Erection Charges
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
doc.pdf
Tender Documents • 1.02 MB
BOQ_535226.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .