Supply Installation Testing and Commissioning of Tricolour Hoisting System in Municipal Area

Supply, Installation, Commissioning & Testing of 30.5 Mtr Flag Mast suitable for 180 Km/hr wind speed complete for 30 Ft × 20 Ft size Tri Colour National Flag. The Flag Mast shall be continuously tapered, twenty sided polygonal cross section in three sections, fabricated from steel conforming to IS 2062 / BSEN 10025, hot dip galvanized inside and outside in single dip and suitable for wind velocity as per IS:875. The mast shall be provided with special type dome, head frame, vandal resistant weather proof lockable base door, complete with double drum winch, stainless steel wire rope, integral power tool, control panel for raising and lowering of National Flag, all accessories, erection, testing and commissioning complete in all respect. The external surface of mast shall be finished with etch primer, primer and Polyurethane (PU) paint as directed by Engineer-in-Charge.

Construction of shallow foundation with M20 grade reinforced cement concrete for the Flag Mast considering the safe soil bearing capacity at site as 10 T/Sq.Mtr. at 2.0 metre depth including excavation, dressing of pit, PCC, reinforcement, centering & shuttering, fixing of foundation bolts with template, curing, backfilling, disposal of surplus excavated earth, soil investigation, all materials, labour, tools & tackles and all incidental works complete in all respects as per approved design and directions of the Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special grade steel complete with heavy duty nuts, washers, anchor plates and templates. Foundation bolt assembly shall be designed to safely withstand all static and dynamic loads of the Flag Mast and shall be supplied, installed, aligned and grouted complete in all respects including all fittings, fasteners, consumables and accessories as per approved design and directions of the Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of System for Raising & Lowering of National Flag. The system shall consist of heavy duty double drum winch, self-sustaining gear mechanism, stainless steel wire rope, hot dip galvanised head frame with LM-6 aluminium pulleys mounted on stainless steel shaft, rope guides, separators, weather-proof control panel, integral power tool with forward/reverse operation and provision for manual operation in case of power failure. The complete system shall ensure smooth, safe and reliable raising and lowering of the 30 Ft × 20 Ft National Flag and shall be supplied, installed, tested and commissioned complete with all fittings, fasteners, accessories and allied works as per the directions of the Engineer-in-Charge

Providing & Fixing of IP-65 Protected LED aviation obstruction light luminaire comprising of die cast aluminium alloy housingwith Polycarbonate enclosure having more than 200 No's Low Power LED's having minimum power consumption 15 watts complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .aviation obstruction LED light luminaire Min. 15 Watts

Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .High Power LED Flood Light Minimum lumen output 43750 lm

Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Poles with Octagonal Cross Section 5 Mtr.

Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations. G) Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days. H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face.Pole Foundation for Octagonal pole from 3 Mtr. To 6 Mtr.

Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special grade steel complete with heavy duty nuts, washers, anchor plates, templates and all accessories for 5 Mtr Hot Dip Galvanized Octagonal Pole. The foundation bolt assembly shall be suitable to withstand the design wind load and structural loads of the pole and shall be supplied, installed, aligned and grouted complete in all respects including all fittings, fasteners, consumables and accessories as per approved design and the directions of the Engineer-inCharge.

Supply, Installation, Testing & Commissioning of Indian National Flag of size 20 Ft × 30 Ft, made from 100% shiny knitted polyester fabric,minimum 160 GSM or higher, conforming to the provisions of the Flag Code of India and relevant BIS/IS standards. The Flag shall be provided with reinforced high-strength nylon webbing on all three sides, heavy-duty rope/toggle sleeve, UV resistant stitching and suitable for continuous outdoor use under high wind conditions.