Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹62.7 LAWARDED | AWARDED |
Tender Value
₹64.0 L
EMD Value
₹64,000
Closing Date
20 Jun 2025, 10:00 pmClosed
Public Works Department
Construction of retaining wall on Aurad-Sadashivaghad SH-34 From KM 459.00 to 460.00 (In Selected reaches) in Ramdurg Taluka of Belagavi district.(Reserved for SC Category only)
PWD/2025-26/RD/WORK_INDENT22248
PWD/2025-26/RD/WORK_INDENT22248
Reserved
Other Works
Two Tender Document System(Two Cover)
PWD Division Office Belagavi
₹1,600
₹64,000
11 Jun 2025
11 Jun 2025
21 Jun 2025
19 Jun 2025
Construction of retaining wall on Aurad-Sadashivaghad SH-34 From KM 459.00 to 460.00 (In Selected reaches) in Ramdurg Taluka of Belagavi district.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and fixing 25mm diameter Steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
ADD FOR FORMWORK (Retaining Wall-10%)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
ADD FOR FORMWORK (Retaining Wall-10%)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than ...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .