CONSTRUCTION OF MULTY STORIED STAFF QUARTERS BUILDING AT HASSAN MAIN DAIRY PREMISES,INDUSTRIAL ESTATE, B.M.ROAD,HASSAN,FOR HASSAN MILK UNION.

CONSTRUCTION OF MULTY STORIED STAFF QUARTERS BUILDING AT HASSAN MAIN DAIRY PREMISES,INDUSTRIAL ESTATE, B.M.ROAD,HASSAN,FOR HASSAN MILK UNION.

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm a...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

In ordinary/soft rock without blasting upto 1.5 m depth

Hard rock (blasting prohibited) Depth upto 1.50 m

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead up...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with alllifts and lead, transportation to site, spreading, ...

Construction of Granular Sub Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m...

Third Floor / Head Room

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates ...

Third Floor / Head Room

do for Plinth Beam with M 25

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Third Floor / Head Room

do for Lintel with M 25

do for Beams with M 25

Third Floor / Head Room

do for Staircase with M 25

do for Slab with M 25

Third Floor / Head Room

do for Chejja with M 25.

Third Floor / Head Room

Providing lath plaster with cement mortar 1 3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup bo...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works. The granite/trap/basalt cru...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Third Floor / Head Room

Providing and constructing granite / trap / basalt size stone masonry with hard stone in foundation and plinth in cement mortar 1 6, stones in courses not less than 20 cms high, bond stones at two m. ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400*200*200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Brick work ( 230mm thk ) with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 4 (1 cement 4 co...

Third Floor / Head Room

Providing and constructing Half brick masonry ( 115mm thk ) with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 ...

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...

Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing an...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm * 45 mm having single rebate of 32 mm * 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsatura...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing of 2.5 track * 2 panel sliding windows made out of multi chambered uPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...

Third Floor / Head Room

Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Third Floor / Head Room

Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fittin...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 3 (1 cement 3 fine sand) to Ceiling / Concrete / brick masonry including rounding off corners wherever required s...

Third Floor / Head Room

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Third Floor / Head Room

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1 3 (1...

Third Floor / Head Room

Providing 20 mm cement plaster with cement mortar 1 3 (1 cement 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required sm...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Third Floor / Head Room

Providing and fixing suitable plaster mesh 200mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Third Floor / Head Room

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Third Floor / Head Room

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6, 20 mm thick, and joints finished with cement mortar 1 3 over existing cement con...

Providing and laying Kitchen Platform using prepolished, water cut/gang saw 40mm thick telephonic Black Granite, laid on existing vertical supports and fixing in CM 1 3 proportion. Including cutting t...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms / shelves, vanity counters, window sills, S...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percent and conforming to IS 15622, of approved make,...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percent and conforming to IS 15622, of approved brand and ...

Providing and laying Ceramic glazed / Anti skid floor tiles of size 300*300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing a...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap fo...

Third Floor / Head Room

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Third Floor / Head Room

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Third Floor / Head Room

Finishing walls with 100percent Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, Alkali and fungal resistance, dirt resistance exterior paint of ...

Third Floor / Head Room

Finishing walls with textured exterior paint of required shade New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

French spirit polishing Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, s...

Painting wood / Masonry work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactu...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Third Floor / Head Room

Providing and constructing un reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Vaccum de watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete incl...

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS 5212 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...

Providing and laying Cement concrete pavement with 1 2 4 for commercial and residential building floors, hardpaths, footpaths using 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal si...

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Providing and laying 100mm thick pre cast cover slabs over drains of width not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00 kg/Sqm, slabs jointed in CM 1 3 proportion and nicely fi...

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M 25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal and 9 nos ...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1 3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Providing and fixing Steel work in built up tubular trusses (round, square or rectangular hollow tubes etc.) etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Third Floor / Head Room

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in charge) 0.50 mm (+ 0.05 percent) total coated thickness with zinc coating...

Third Floor / Head Room

Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 percent) total coated thickness, Zinc coating 120 grams per m2 as per IS 277, in 240 mpa steel grade, 5 7 micr...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 percent) total coated thickness, Zinc coating 120 grams per m2 as per IS 277, in 240 mpa steel grade, 5 7 micr...

Providing and injecting chemical emulsion for Preconstructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top...

Providing and laying integral cement based waterproofing treatment iincluding preparation of surface as requried for treatment of roofs, balconies, terrace etc., consisting of following application. (...

Third Floor / Head Room

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modi fied cementitious waterproofing membrane with minimum elongati...

Providing and laying cinder concrete in cement 1 15 ( 1 cement 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Providing and fixing C.I. frames with cover of approved Ist quality and make conforming to I.S.I. Specification and fixing in C.C. (1 2 4) 7.5 cms thick including curing (Rate includes cost of all mat...

Making soak pit 2.5 m diameter 3.0 m deep with 45 * 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...

Supplying SandS RCC SPUN / VIBRATED CAST PIPES (REINFORCED)

pipes NP 3 Class conforming to IS 458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work s...

Complete Demolition / Dismantling Work of Existing Building / Structure including Plain / Reinforced Concrete, Masonry, Stone Work Foundations, Tiles / Flooring, Door Windows, Steel / Iron Mongry wo...

B SANITARY PLUMBING WORKS

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, includ...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer in charge

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge.

P/F Chorinated Poly chloride (CPVC) pipes, (Supreme or equivalent make) having thermal stabilty for hot and clod water supply inclding all CPVC plain and brass threaded fittings including fixing the p...

P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. R brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required incl...

P/F. I.S.I. Approved make, UPVC heavy duty ball valves, fixing in the water supply lines with necessary plumbers gum etc complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing Side operated Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements and all necessary accesori...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...

b) 110 mm dia .

c) 150mm dia pipe.

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete

Providing and fixing high density polythylene water storage tank with cover, conforming to ISI 12701, colour of opaque white or as approved by Engineer in charge. The rate includes making ncessary h...

Making bores / Drilling / Cutting Holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks

do In Stone Masonry (Upto 600mm Thk SSM)

Making bores / Drilling / Cutting Holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 (1 ce...

Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar ...

Construct Brick masonry in CM 1 4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1 3, 12mm thick, except for the conical surface outside where the plaster ...

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5 M depth and SFRC cover and frame

C INTERIOR WORKS

Manufacturing, supplying and fixing wooden Ward Robe of 0.60 m deep using 19 mm thick vinyl bonded water proof block board, shutters all round ward robe, lockable drawers with sli...

Providing, Supplying and Fixing / Installation of Cupboard Shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) ...

Providing and supplying Kitchen cabinet Shutter with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(pre...

Providing and supplying TV Unit Back Panel with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BOARD of approve...

1. LT PANEL AND MCB DISTRIBUTION BOARDS Supply, installation, testing and commissioning of LT panels made out of 14G sheet steel as per drawing and specifications. The panel shall be suitable for 3 p...

2. MCB DISTRIBUTION BOARDS Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type c...

DB CA 6 Way VTPN MCB DB

Incomer 1 No. 32A TPN MCB

Outgoings i) 5 Nos. of 6A SP MCBs

ii) 6Nos. of 16A SP MCBs

iii) 4 NoS. of 25A TP MCB

6 Way TPN MCB DB

1 No. 20A TPN MCB

8 nos. of 6/10A SP MCBs

3nos. 16A Astronomical timer Switch

3. EARTHING SYSTEM Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 Mtr long GI pipes with GI funnel with mesh and suitable ...

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required 25x3mm GI strip

Digging of trench of 0.6m x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete In soil (ordinary)

4. INTERNAL ELECTRICAL WORKS Concealed conduit system Supplying and fixing of PVC conduit of 20 mm dia, 2mm thick in the concealed slab / groove cutting including required bends and accessories, i...

Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Two in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box

Three in a row above 6 mts upto10 mtrs from tapping point to outlet via switch box

1L / 2 nos. 2 way switch

Supply and wiring for call bell point with 3 * 1.5sqmm PVC insulated copper conductor FRLS wires in 20mm dia FR PVC conduit, including outlet box, inter connectioin to the lighting circuit for power s...

Ceiling fan point controlled by 6A modular type switch and fan regulator. Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Exhaust fan point (Single phase) controlled by 6A modular type switch and 6A socket outlet near the exhaust fan. Long point above 6 mtrs upto 10 mtrs.

5. CIRCUIT MAIN / POWER MAIN / SUBMAINS Supplying and wiring for lighting circuit mains/ power mains/submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core c...

2 X2.5 Sqmm + 1 X 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit for Lighting Circuit Mains

2 X 4 Sqmm + 1 X 2.5 Sq mm PVC Insulated wires drawn in 25 mm dia PVC conduit

2 X 6 Sqmm + 1 X 4 Sq mm PVC Insulated wires drawn in 25 mm dia PVC conduit

4 X 6 Sqmm + 2 X 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/raceway as required.2 x 2.5 Sqmm + 1 x 1.5 Sq mm P...

2 X 4 Sqmm + 1 X2.5 Sq mm PVC Insulated wires drawn in 25 mm dia MS conduit

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1 to 3Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch/ Socket on existing modular switch plate Group B materials 6Amps one way.

6Amps Two ways.

6Amps 3way socket.

16Amps one way switch

6/16Amps universal socket

Stepped Fan Regulator.

Telephone socket

6Amps Bell Push

6. SUPPLY and INSTALLATION OF LIGHT and FAN FIXTURES

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with...

LED square or round down light 10 12W

LED square or round down light 15 18W

Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI greater than 80. Power Input 22...

LED light fitting 1 * 4 20/22 W

LED light fitting 1 * 4 36/40 W

10W LED, bulk head light fixture of type LIBHP 10 C V1 of Orient make/equivalent.

Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076 twin twisted PVC insulated wires, req...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to IS 374 1979 and with double...

Fixing a ceiling fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23 / 0.0076 in...

Supplying exhaust fan of 1440 RPM of 300mm (12inch) size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make.

7. TELEPHONE SYSTEM Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe with suitable size bends,metal junction boxes adhesive paste etc., and running before concreting the slabs. The c...

Supplying and installing of multicore 0.61mm, copper conductor, PVC insulated,PVC sheathed, armoured telephone cable laid drawn through, existing tray/trench with all necessary accessories as required...

Supplying, installation, testing and commissioning of telephone junction box. The junction box shall be with sheet steel enclosure enclosing krone connector and shall be provided with padlock arrangem...

Supplying and Laying wiring for telephone outlet using 0.51m, 2 pair, inner copper conductor, unarmoured PVC insulated telephone wires in existing conduit. Supplying and Laying

7 TV SYSTEM Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe with suitable size bends,metal junction boxes adhesive paste etc., and running before concreting the slabs. The conduit...

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co axial TV cable. RG 6.

8. CCTV Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc., a...

25mm dia PVC Conduit Supplying and laying

Supplying, drawing and connecting of 1 pair E Cat 6 cable in 25mm dia PVC conduit with all other accessories.

Supply, installation, testing and commissioning of outdoor 2.0MP IP IR Minidome, WDR, 2.7 12mm varifocal Color dome Camera, 1/3inch CMOS, H.264/MJPEG High profile, dual Stream support, True Day and N...

Supply, installation , testing and commissioning of managed L2 8 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. and power budget of min. 120W. The switch shall be mounted on existing rack. Th...

Supply, installation, testing and commissioning of network video recorder Supporting up to 8 Camera Streams with 8TB HDD , shall support windows platform, warning system alerts for fan fault, HDD temp...

Supply and fixing of switch mounting rack with power manager and cable manager 9 U with 450mm depth

Supply, Installation, testing and Commissioning of 40inch LED TV without tuner for monitoring the cameras.

9. MISCELLANEOUS WORKS Supply and laying of 2 mm thick, PVC conduit with all conduit accessories etc., as required. The rate shall include chasing of walls / floors and plastering the chased portion ...

25mm dia PVC Conduit

32mm dia PVC Conduit

Supply and fixing of conduit support celling suspended type / wall bracket type clamps with necessary sandies for fixing of conduits / cables wher ever necessary. The detail of supports shall be made ...

10. LIFT INSTALLATION Design, supplying, erecting testing and commissioning of Passenger Lift/ Bed cum passenger hospital lift with speed of 1mtr per second, variablevoltage variable frequency dri...

11. LT cable and terminations Supply and Laying of 1100V grade, XLPE/ PVC insulated, PVC sheathed, Aluminium / copper conductor, steel armoured cables. The cable shall be laid in exsiting trench, c...

3C 6 sqmm Al. XLPE Cable

Supply and providing end termination for below listed PVC insulated, PVC sheathed, aluminium conductor,steel armoured, 1100V grade , cable using brass cable glands and copper lugs etc, all complete a...

3C 6 sqmm Al. XLPE Cable

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication and Signalling lines having flexibility and anti termite, anti corrosive, good abrasion, fatigue strength and U...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Sand Filling in Wells / Cable Trenches complete as per Drawing and Technical Specifications.

Supply and laying of brick protection for under ground cables laid in existing trench.

12. External lighting Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door ope...

9 meters Top 70mm and bottom 155mm dia

Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top sectio...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

LED Streetlight 90 Watts

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Fixing halogen/metal/LED flood light fitting over existing pole including clamps, bolts, nuts, and wiring using suitable capacity wires