CONSTRUCTION OF TEACHERS RESIDENTIAL QUARTERS AT H S Lander ZONE Panchari DISTRICT UDHAMPUR

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 80%. All kinds of soils and 20% ordinary rock

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 80%. All kinds of soils and 20% ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8) 1 cement 4 coasre sand 8 stone aggregate grade, with 40mm nominal size . crushed

Providing and laying Cement Concrete 1:5:10 (1 ce- ment: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, col- umns etc. excluding cost of centering and shuttering , all work upto floor V level

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 3 : 6)1 cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed with 20% boulders.

Reinforced cement concrete work in wall (any thickness) including attached pilasters 'buttresses'plinth and string courses'fillet ,column pillar'piers ,abutment 'post and sturts etc upto floor five level excluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6 (1 cement : 6 coarse sand) Ground floor and First Floor

Extra for brick work in Super structure above plinth level upto floor V level (By manual means)

Reinforcement of RCC work in Plinth band incl straightening, cutting, bending, placing in position and binding all complete. .

Centering and shittering including strutting propping etc and removal of form work Foundation footing bases of columns etc

Centering and shuttering incl. struting, proping ,etc.and removal of form work for edges of slab under 20 cm

Centering and shuttering incl. struting, proping ,etc.and removal of form work for suspended floors, roofing, landings, balconies and access platform

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement : 6 fine sand )

12 mm cement plaster on wall of mix 1:6 ( 1 cement 6 fine sand ) Outside of walls

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash asteners shall be paid for separately): Sal wood

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, (35mm thick of 2nd class deodar wood).

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick

Strctural steel work welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Trusses

Providing fixing and glass strips in joints otterrazo/cement concrete floor 40 mm wide x 4mm thick

Cement Concrete Flooring in (1:2:4) 1 cement : 2 coarse Sand : 4 stone aggregate finsihing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50 mm thick with 20mm nominal size stone aggregates (Crushed)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufactures on wood work (hard and soft wood)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Raj Nager plain white marble/udhaypuri green marble/zebra black marble (Area of slab upto 0.5 sqm) 16 mm thick

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board. 510x1040mm bowl depth 250mm

Providing and fixing precoated galvanised iron profile sheet (size ,shape,and pitch of corrugation as approved by enginner in charge ) 0.50 mm (+0.05%) total coated yhickness with zinc coating 120 gm. per sqm as per IS 277 ,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns min. to avoid scratches during transportation and should be supplied in single length upto 12 mt. or as desired by engineer -in-charge .The sheet shall be fixed using self drilling /self tapping screws od size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ verti cal or curved surface, excluding the cost of purlin ,rafter and trusess and including cutting to size and shape wherever reqd.

Providing and fixing precoated galvanised iron profile sheet (size ,shape,and pitch of corrugation as approved by enginner in charge ) 0.50 mm (+0.05%) total coated yhickness with zinc coating 120 gm. per sqm as per IS 277 ,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screw complete

Providing and fixing hard board celing sheet of approved quality with neccesary nails etc. complete 6 mm thick including wooden corner moulding of triangle shape. as per requriment ( frame work paid separately celling

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position second class kail wood

White washing with lime to give an even shade. New Work (three or more coats

Finishing walls with water proofing cement paint of required shade. New work (two or more coats) applied @3.84 kg/1O sqm

Electric wiring with 1.5 sq.mm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868) transparent or dyed to required colouur or shade with necessary screws etc. complete

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S & S pipe as per IS: 1729

Providing and fixing brass stop cock of approved quality. 15 mm nominal bore

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing 600 x 120 x 5 mm glass sheet with edges round supported on anodised aluminum angle frame with CP Brass brackets and guard rail complete fixed with 40mm long Screws rail plugs etc complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall. 15 mm dia. nominal bore - Light

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) (medium) 20 mm dia. Nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) (medium) 15 mm dia. Nominal bore

Construction of brickmasonary manhole in cement mortar 1:4 (1 cement 4 coarse sand )Rcc top Slab with 1:2:4 Mix (1 cement 2 coarse sand 4 stone aggt. 20 mm nomial size ) foundation concrete 1:4:8 mix (1 cement 4 coarse sand 8 stone aggt. 40 mm nomial size ) inside plastering 12mm thick cement mortar 1:3 (1 cement 3 coarse sand )finished with a floating coat of neat cement and makinf channel in cement concrete 1:2:4 (1 cement 4 coarse sand 8 stone aggt. 40 mm nomial size ) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including CI coverwith frame light duty 455x610 mm internal dimension total weight of cover and frame to be not less than 38 kg and weight of cover 23kg and weight of frame 15 kg with FPS brick with class designation 75 and with crushed stone aggt.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter volts nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 cement concrete

Providing and laying damp proof courses 40 mm thick wiyh cement concrete 1:2;4 1 Cement 2 coarse sand 4 stone aggregate 12.5 mm nominal size crushed

Providing and fixing plained eaves boarding 2nd class deodarl wood 300 x 32 mm

Carriage of Sand (Nud) by mechanical transport including loading , unloading & stacking complete lead upto 130 km av & manual labour 100mt av

Carriage of stone aggregate (Roundomail) below 40 mm thick by mechanical transport including loading, unloading & stacking complete lead upto 55 km av & manual labour 100 mt av

Carriage of bricks (Samba) by mechanical transport including loading, unloading & stacking complete lead upto 140 km av & manual labour 100 mt av

Dry random rubble masonary with hard stone in foundation and plinth using nallah stone without bond stone . Rotection wall back side

Providing and fixing Ms grill of reqd. patter in frame of window etc with M S flat ,square or round bars ,railing etc all complete fixed to opening/window frame with raw plugs,screw etc

Bilal Ahmed Malik

Pardeep Kumar

Dwarka Construction

Anil Kumar

M/s Subash Chander