ADDN / ALTRN OF OFFRS TOILET IN BLDG NO 31 AND SPL REPAIRS TO CHAIN LINK FENCING FROM PIPE BAND TRG AREA TO HAWA SINGH GYM AT GRC KAMPTEE.

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick/ stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/ roof/ ceiling mixed with and including liquid water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed.

M&L for 25mm thick PCC type B-0, 1:2:4 (using 12.50mm graded stone aggregate) as in floor, surface finished even & fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic joint less tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over & including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles 600 x 300 x 7mm / 450 x 300 x 7mm thick, on vertical surfaces such as dados and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4, on fair faces of brick work or concrete surfaces as backing complete all as specified and directed. Make:- H & R Johnson, Brand-Spanish Series or equivalent.

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and likes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of cement mortar 1:4, 15mm thick, surface finished even & fair complete all as specified and directed.

M&L for rounding to edges of granite stone slabs, one edge such as in counter type WHB platform etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

M&L for GI frame work for seamless ceiling in flat or inclined shape coprising of GI perimeter channel 0.55 mm thick with two unequal flanges 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.90 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm C/C with GI cleat and steel expansion fasteners with and including ceiling section ( not exc. 1.2 m length) of 0.55mm thickness having kurld web of 50 mm and flange of 26 mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm C/C complete all as specified and directed.

M&L for providing and fixing Gypsum Board of 12mm thick in ceiling/ suspeneded ceiling in plain/ designer/ decorative shape, fixed with screws as per manufacturer's instructions complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F solid PVC frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube etc complete all as specified and directed.

S&F PVC factory made solid, PVC moulded prelam sheet on the front face & prelam PVC sheet on back face for door & cupboard shutter with particle board core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specification & drawing complete all as specified and directed.

S&F brass chromium plated barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed, length of bolt 200mm long complete all as specified and directed.

S&F brass chromium plated, sliding door bolt with sand cast brass, hasp staple (bolt type) of 250mm length complete all as specified and directed.

S&F butt hinges, cast brass chromium plated, with mild steel hinge pin, bright polished and fixed, type B-11, size 100mm etc complete all as specified and directed.

S&F brass chromium plated handles cast type of 150mm size complete all as specified and directed.

S&F in repair CP grating of size 100mm dia complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) for frames in doors, windows and ventilators, openable or sliding any type etc with one or more rebates including necessary jointing cleats for fixing etc complete all as specified and directed.

M&L for floor door spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed to aluminium door etc complete all as specified and directed.

Taking down steel tubing and connections of 15mm bore complete all as specified and directed.

Taking down steel tubing and connections of 20mm bore complete all as specified and directed.

Taking down steel tubing and connections of 25mm bore complete all as specified and directed.

S&F CPVC pipes, SDR 11 & plain CPVC fittings, laid in trenches or fixed to wall for 16mm outer dia of pipe complete all as specified and directed.

S&F CPVC pipes, SDR 11 & plain CPVC fittings, laid in trenches or fixed to wall for 20mm outer dia of pipe complete all as specified and directed.

S&F CPVC pipes, SDR 11 & plain CPVC fittings, laid in trenches or fixed to wall for 25mm outer dia of pipe complete all as specified and directed.

M&L for applying birla white putty/ JK white wall care putty on walls complete all as specified and directed.

M&L for birla white putty/ JK white wall care putty on ceiling complete all as specified and directed.

M&L for preparation of putty surfaces of walls and applying two coats of anti fungal plastic emulsion paint on walls/ ceiling complete all as specified and directed.

All as per item No 33 above but on ceiling complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing plain/ tinted with rubber gasket in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (double T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, ISI marked, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, ISI marked complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, ISI marked, any radius with access door complete all as specified and directed.

Dismantling water tanks of capacity exc 500 Ltr and not exc 1000 Ltr and removing from site complete all as specified and directed.

S&F, Hoist and fixing in position rotational molded polyethylene water storage tanks (cylindrical with closed top and float valve complete fitting) of capacity 1000 ltrs complete all as specified and directed.

M&L for roughening the surfaces of old concrete floor/terrace by picking including taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc 50m complete all as specified and directed.

M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on miniral/slate finished membrrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven polyster film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm and finished on top with mineral/slate finished torch on system laid with 100mm & 150mm over lap on side & end laps resepectely complete all as per manufacturers compound complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

S&F bib taps chromium plated wall flange long body for 15mm bore pipe complete all as specified and directed. Make:- Jaquar Cat No-FLR-5047N or equivalent.

S&F angular stop cock chromium plated with adjustable wall flange long thread for 15mm bore pipe complete all as specified and directed. Make:- Jaquar Cat No-FLR-5063N or equivalent.

S&F concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal complete all as specified and directed. Make:- Jaquar cat part No-5083Nk or equivelent.

S&F health faucet (hand shower) CP with flexible tube of 1.20 mtr long and wall hook complete all as specified and directed. Make:- Jaquar Cat No ALD-CHR-593n or equivalent.

S&F toilet paper holder, chromium plated complete all as specified and directed. Make:- Jaquar Cat No ACN-1153S or equivalent.

S&F CP corner glass shelf with bracket complete all as specified and directed. Make:- Jaquar Cat No ACN-1173 or equivalent.

S&F brass chromium plated towel rail 600mm long complete all as specified and directed. Make:- Jaquar Cat No AKP-35711 PS or equivalent.

S&F table top basin size 480x470x190mm complete all as specified and directed. Make:- Jaquar Cat No JDS-WHT 25903 or equivalent.

M&L for single piece slim concealed cistern body with installation kit & S type drain pipe connection set for wall hung WC (without flush control plate) complete all as specified and directed. Make:- Jaquar Cat part No JCS-WHT-2400S or equivalent.

M&L for urinal with fixing accessories set size 375x315x620mm complete all as specified and directed. Make:- Jaquar cat part No URS-WHT-132530 or equivalent.

S&F 10mm thick toughed sheet glass, hatches, figured quality and glazing plain/ tinted with rubber gasket in square exceeding 0.5 Sqm in each pane, including fixing arrangements hinges, 30cm long stainless steel handle in each pair and pivoted spring as per requirement complete all as specified and directed.

M&L for plate flushing cistern complete all as specified and directed. Make:-Jaquar Cat part No JCP-CHR-372415 or equivalent.

M&L for sensotronic sensor faucet for wash basin complete all as specified and directed. Make:- Jaquar Cat part No SNR-CHR-51033 including complete fittings or equivalent.

M&L for aquisense sensor concealed type flushing valve for urinal complete set witth instalation box with control cock and all fittings complete all as specified and directed. Make:- Jaquar Cat part No SNR-STL-51077 or equivalent.

M&L for wall hung WC with seat, cover, hinges, accessories set complete with fittings of size 370x490x365mm, complete all as specified and directed. Make:- Jaquar (Cat part No-ONS-WHT-10953BI) or equivalent.

M&L for hand dryer speedflow, material: AISI 304 stainless steel finish: satin complete all as specified and directed. Make:- Jaquar (Cat part No-HDR-SAP-M99ACS) or equivalent.

Removing building materials to a distance of 100m or under, beyond the lead including in the rates including loading, unloading and stacking at the destination complete all as specified and directed.

Dismantling post or strut embeded in concrete (wood/ steel/ RCC) any section embeded in concrete including taking out embeded portion and making good complete all as specified and directed.

Dismantling fencing, wire mesh of any description complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good to surface complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50m in depth for foundation of the wall not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for brick work with fly ash bricks, curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on surfaces of brick wall in cement mortar 1:4, surface even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F MS works for fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for mild steel round bar 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for securing and supporting of of wire mesh confirming to Gd I, IS-432 or Fe-290 (Gde-E-165) complete all as specified and directed.

Fixing only chain link MS galvanised fencing of any size with GI wire including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note:- Each line wire to be measured.

Supply only galvanised chain link fencing 3.40mm dia & 100x100 mesh including line wires weight not exc 4.00 Kg/Sqm complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed the other, fitted with washer and one hexagonal or square nut not exc 5cm long and 10mm dia complete all as specified and directed.

Taking down unserviceable point wiring with copper / aluminium conductor cable of (light, fan, plug & power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell / buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls / floor etc to macth with existing surfaces including white washing / colour washing /distempering complete all as specified and as directed.

Taking down old unserviceable MCB, sheet metal enclosure, DB, main switch etc and making good distrubed sufaces of wall complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/ capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L point wiring 1100 volt grade single core FR PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade, concealed on surface of wall/ ceiling as per site requirement including FR PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel terminal boxes/ modular boxes sunk on wall for mounting of any type (modular/ piano type) switches, switch sockets, fan regulator etc including laminated sheet cover 3mm thick / white top modular cover any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.

All as per item No 85 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 85 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 85 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 85 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with 1100 volt grade two single core FR PVC insulated unsheathed stranded copper conductor cable 2 x 6.0 Sqmm with and including 1 x 6.0 Sqmm copper conductor earth continuity wire drawing in existing PVC conduit concealed in wall/ceiling complete all as specified and directed.

S&F modular switch, one way, 6A, 1 module complete all as specified and directed.

S&F modular switch, one way, 16A, 1 module complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular socket, 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F ceiling rose, surface type 2/3 terminal, 5 amps complete all as specified and directed.

S&F LED light fittings, ceiling mounted spot lights, 3 watt luminaires, 800 lumen, IP 65, 4000K warm white surge protection including drivers etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50 Hz complete all as specified and directed. Make:- CG cat part No CDR-210-03-40-SL-NWH / Philips cat part No 47030 27K 3W Spot White or equivalent in Wipro.

S&F LED wall mounted mirror light, decorative including drivers having nergy consumption 12W, 230V, 50Hz, 6500K complete all as specified and directed.

S&F LED strips lighting made out of bendable material for flexible decoration, 5 mtr length, IP 65 protection complete all as specified and directed.

S&F LED wall light decorative wall mounted die cast, aluminium LED fixture with ivory white powder coating for unknown ascent lighting, hidden COB for glare free indirect light 6W warm white complete all as specified and directed. Make:- Havells cat part No XING ROUND LED 6W or equivalent.

S&F sheet metal enclosure, single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB, single pole, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F wall mounted fan, single phase, 300mm sweep with pull cord, 230V, 50Hz, BEE 5 star rated including 3 core cable from ceiling rose to fan connector complete all as specified and as directed.

M&L for making suitable size holes for 200/225 mm sweep exhaust fan and including grouting bolts, cutting, chasing and plastering, whitewashing etc and match with existing surfaces complete all as specified and as directed.

S&F exhaust fan, single phase, 225mm sweep, modular PVC body and connected electrically complete all as specified and as directed.

Supply, installation, testing & commissioning of water heater, instantaneous type, 3 ltr capacity with 5 star rating, single phase, 230V, 50Hz electric supplied and installed complete including grouting with nut bolts, PVC threaded tough flexible pipe/ tubing of standard length for inlet / outlet connections complete all as specified and as directed. Make:- Racold / Havells or equivalent.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.17,654.00]

VIJ ASSOCIATES

M/s M.G. Hargunani

M/s B S Jain

SHUB CONSTRUTION

M/S J.A CHAWHAN

NORTH INDIA PEST CONTROL

M/s DS Khekde

Bidder Name

M/S J.A CHAWHAN

SHUB CONSTRUTION

M/s T.S.JOHAR

M/s B S Jain

M/s DS Khekde

VIJ ASSOCIATES

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL