SPECIAL REPAIRS TO OR MARRIED ACCOMMODATION BLOCK NO 16 GURKHA CAMP OF MRC UNDER GE WELLINGTON.

Amount

Taking down existing water proofing treatment of any description including bedding layer over roof slabs and roughening of surface complete all as specified and directed.

Demolition of cement concrete of any description and in any position including padding concrete complete all as specified and directed.

M&L for providing 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof padding all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 mixed with water proofing compound as per manufactures Instructions finished even and fair on roof slab/fair faces of brick work or concrete surfaces complete all as specified and directed. Note : Water Proofing Compound will be measured and paid separately

Supply only Liquid Water Proofing Compound complete all as specified and directed.

M&L for APP modified prefabricated polymeric membrane 4 mm thick and weighing not less than 4.5 kg/sqm reinforced with non woven polyster matt, black finished weighing not less than 100 gm /sqm having softning point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm, side lap and end lap 10 cm with torch application of membrane, over compatible primer @0.40 Ltr/Sqm and finishing with aluminium paint applied @ 0.10 Kg/Sqm complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each and refixing in same openings including easing and adjustment, renwal of unserviceable screws and hinges, complete all as specified and directed.

M&L for IInd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed complete, all as specified and as directed.

M&L for 35mm thick IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers; supplied and fitted to chowkats, complete all as specified and directed.

S&F 35 mm thick flush shutter, solid core construction, with block board core and covered with decorative face veneer with lipping/ frame on faces on both sides complete all as specified and as directed.

S&F Pressed Steel windows with side hung shutters with glazing bars including box type hinges with steel handle and steel peg stay, dovetailed or welded complete all as specified and directed.

S&F Pressed Steel ventilators with top hung shutters including box type hinges with steel handle and steel peg stay complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality in squares not exceeding 0.50 Sqm in each pane and glazing with oil putty or wooden beads complete all as specified.

S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and fixed to the frame at site complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old treated steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preprtion of old treated wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F 100 mm size, mild steel cold rolled butt hinges, medium weight complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F mild steel work as in hold fast etc confirming to FE-290 Gde E-165 complete all as specified and as directed.

M&L for plain dement concrete 1:3:6, type C1, using 20 mm graded stone aggregate as in bed blocks for hold fast including use and waste of form work complete all as specified and directed.

S&F 150mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs 150mm size floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for taking down unserviceable hinges from steel windows and fixing new box type hinges by welding, making easy opening and closing including painting and refixing window in same opening and making good to existing surface all as directed by Engineer-in-Charge.

S&F in repairs left/right MS handle of steel windows complete all as specified and directed.

S&F in repairs peg stay 250 mm/300 mm long stopping of steel window/ventilators including welding (if required) and fixing complete all as directed by Engineer-in-Charge.

S&F in repairs 150mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works complete all as specified and directed.

M&L for Preparing surfaces of small articles such as stop, covers, gully, gratings, hold fast, etc area not exc 0.1 Sqm each of any description and girth, not other wise described and treated with tar or coal tar black paint complete all as specified and directed.

S&F aluminium Hat and coat hooks, solid body, 175mm to 250mm, complete all as specified and directed.

Dismantling boarding of any description, fixed in any position with nails complete all as specified and directed.

S&F 12mm thick prelaminated particle board. both side decorative choice laminations. exterior grade fixed to frame work complete all as specified and directed.

S&F for 18/19 mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for plain fillets of second class hard wood wrought exceeding 6 sqcm but not exceeding 13sqcm, square, rectangular or triangular in section clean sawn secured with nails or brads complete all as specified and as directed.

S&F 6mm thick teak wood lipping on block board or veneered particle board, fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed.

S&F 100 mm size, brass handles, cast type, polished bright complete all as specified and as directed.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 40mm size butt hinges, cast brass with mild steel hinge pin, bright polished type B-11 complete all as specified and directed.

S&F 75mm size latches with two lever of brass body with brass knob or lever handle complete all as specified and directed.

S& F 40 mm dia cupboard knobs of brass polished bright finished, fixed with nuts, screw and washer complete all as specified and directed.

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) and all as directed .

Dismantling, floor hearth or wall tiling including cement mortar bedding, removing serviciable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles, 450 x 350 x 7 to 8mm/600x300x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface, including 10mm thick rendering in CM 1:4 as in in vertical surfaces like dados, skirting etc. complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:4 as in floors etc. complete all as specified and directed.

M&L for coloured dark Shade vitrified ceramic tiles, 7 to 8mm thick, (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 as in floors etc complete all as specified and directed.

M&L for coloured dark shade vitrified ceramic tiles, 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster in CM 1:4, as in skirting, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate, as in flooring subbase etc., complete all as specified and as directed.

M&L 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed in CM 1:6 complete all as specified and as directed.

M&L for 20mm thick granite machine cut, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in CM 1:4 as in skirting/dado on stone/brick masonry surfaces complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry with grey cement & pigment over and including 15mm thick screed in CM 1:4 as in floors complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for 20-25mm thick polished machine cut kota stone slab in flooring/cills laid and jointed with grey cement slurry mixed with pigment to the shade of the slab including rubbing and polishing over and including 15mm thick screed in CM 1: 4 as in flooring/cills complete all as specified and as directed.

M&L for 20-25mm thick polished machine cut kota stone slab, laid and jointed with grey cement slurry mixed with pigment to the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in CM 1:4 as in riser of steps, skirting, dado and pillar complete all as specified and as directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of brick/concrete/RR Masonry surfaces and finished even and smooth without using extra cement complete as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finished even and smooth without using extra cement complete as specified and directed

Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc, to receive plaster, complete all as specified an ddirected.

M&L for 5mm thick rendering in CM 1:4 with WPC over a coat of 10mm thick rendering in CM 1:6 on stone wall surfaces, finished even & smooth without using extra cement etc complete as specified and as directed.

Supply only water proofing compound all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint white or tinted over a coat of primer as approved by GE complete all as specified and as directed

M&L for preparation of new plastered walls surfaces and applying two coats of oil bound distemper over a coat of primer and a under coat of wall care putty complete all as specified by Manufacturers Instructions and as directed by Engineer in Charge

M&L for preparing plastered or unplastered new wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat of primer and a under coat of wall care putty complete all as specified by Manufacturers Instructions and as directed by Engineer in Charge

M&L for preparing plastered or unplastered new ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on surfaces of wall and applying one coat of primer (water thinable/solvent thinable) over two coats of Acrylic wall care putty even and smooth and applying two coats of oil emulsion paint (washable) as per manufacturer instructions complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of ceiling and applying one coat of primer (water thinable/solvent thinable) over two coats of Acrylic wall putty even and smooth and applying two coats oil emulsion paint (washable) as per manufacturer instructions complete all as specified and as directed.

M&L for preparaton of old decorated plastered or unplastered surface of ceiling by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil, greasy spots etc. and applying two coat of white wash on ceiling complete all as specified and as directed.

M&L for preparaton of old decorated plastered or unplastered surface of walls by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil' greasy spots etc. and applying two coat of white wash on walls , complete all as specified and as directed.

S&F in repairs stainless steel curtain rod of 20 mm dia including side caps and single/double brackets complete all as specified and as directed.

S&F in repair kitchen sink with drainage board made of stainless steel sheet of 1.00mm thick, overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, with plugs, washers and wastes couplings, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including coupling, PVC waste pipe of 32mm bore of suitable length, complete all as specified and as directed.

M&L for vitreous china squatting pan, 'Orissa" pattern size 580mm x440mm, white with 'p' or 's' trap, fixing with screws of suitable size including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified.

S&F PVC flushing cistern of 10 ltrs capacity, valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified.

S&F in repairs 15mm dia long body bib tap, fancy type, chormium plated complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or techno-commercially equivalent.

S&F in repairs, 15mm bore brass CP wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe complete all as specified and as directed. Make : Cat No. CON- 273KNUPR of Jaquar or techno-commercially equivalent.

S&F in repairs over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long complete all as specified and as directed. Make: JAQUAR or techno-commercially equivalent.

S&F in repairs 15mm bore, bib tap, fancy type, chormium plated complete all as specified and as directed.

S&F in repairs vitreous china under counter wash hand basin with fixing accessories, oval shape size not less than 590x420x195 mm including brass chromium plated perforated waste coupling/fittings, 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore Pillar Tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed complete all as specified and as directed.

S&F in repairs 15mm bore angular stop cock with wall flange, chorumium plated fancy type, complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs towel rack, 600 mm long with lower hangers as in bathrooms complete all as specified and as directed. Make:Cat No.ACN 1181N of JAQUAR or techno-commercially equivalent.

S&F in repairs tubular swivel towel holder twin type complete all as specified and as directed. Make: Cat No.ACN 1115N of JAQUAR or techno-commercially equivalent.

S&F in repiars soap dish complete all as specified and as directed. Make:Cat No.ACN-1131N of JAQUAR or techno-commercially equivalent.

S&F Sheet glass shelf assembly corner consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed. Make:Cat No.ACN-1173 of JAQUAR or techno-commercially equivalent.

S&F in repairs PVC readymade bath room cabinet of size 450x550 with mirror shutters, fixed to wall with necessary screws and lugs as in repairs complete all as specified and as directed. MAKE:JAQUAR or techno-commercially equivalent.

S&F PVC (SWR) Floor/Nahani trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for reflixing or removal to store, complete all as specified and as directed.

Supply, laying and testing steel water tubing of size 15mm bore, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fitttings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified

Refixing of old steel tubing of size 15mm bore and connections in new or old positions concealed (walls,ceiling, floors), complete all as specified and as directed.

Supply, laying and testing steel water tubing of size 20mm bore, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fitttings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified

Refixing of 20mm bore of old steel tubing and connections in new or old positions concealed (walls,ceiling, floors), complete all as specified and as directed.

Supply, laying and testing steel water tubing of size 25mm bore, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fitttings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified

S&F 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.

S&F 25mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Dismantling of water tanks of capacity exc 250 ltrs and not exc 500ltrs and removing to store all as specified and directed.

S&F rotational moulded polyethelene water storage tanks 1000ltrs (cylindrical vertical with closed top screwed type) hoisted and fixed in position complete all as specified and as directed.

S&F stainless steel plate track of size 0.9 X 1.2 m of readymade item locally available complete all as specified and as directed.

Demolition and breaking up drain pipes of any description of any size complete all as specified and as directed.

M&L for PVC (SWR) pipes, 110mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for PVC (SWR) pipes, 75 mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for PVC (SWR) pipes, 110mm, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

M&L for PVC (SWR) pipes, 75 mm, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

M&L for PVC (SWR) bends, 110 mm, any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends, 75mm, any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends, 110 mm, any radius, with access door complete all as specified and as directed.

M&L for PVC (SWR) bends, 75mm, any radius, with acess door complete all as specified and as directed.

M&L for PVC (SWR) single T equal or un equal ds, 110mm, complete all as specified and as directed.

M & L for PVC (SWR)single T equal or un equal ds, 75mm, complete all as specified and as directed.

S&F stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified and as directed.

S&F stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified.

S&F PVC (SWR) vent cowl, 75 mm, complete all as specified and directed

S&F PVC (SWR) vent cowl, 110 mm, complete all as specified and directed.

S&F Mild steel works for bands, straps,support or stays, holdfast for doors, wall ties; hooks for hanging fans,etc. Conforming to Fe-290 Gde E - 165 complete all as specified and directed.

S&F PVC (SWR) gully trap, 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Demolition and breaking up drain pipes150mm bore (Salt glazed ware, AC or Reinforced concrete, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation etc. or for shafts , wells , cesspits,manholes,pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth in hard/dense soil and getting out, complete alll as specified and directed

S&F RCC class NP3 drain pipes of internal diameter 150 mm laid in trenches and jointed complete with collars and testing complete all as specified .

M&L for concrete bed to drain pipes of 150mm bore, including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate including necessary formwork complete all as specified and directed. Note:- Thickness of the concrete bed shall be 100mm

Returning filling in (soil), including spreading, levelling , watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for cutting into existing manhole for connecting new drain pipes of 150 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for cement concrete 1:2:4, type B2 using 40mm graded stone aggregate as in surface channel and drains complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc, complete all as specified and directed.. (Note : Inner girth only measured).

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified.

M&L for Brickwork in CM 1:6, with subclass `B' bricks, straight or curved on plan exceeding 6m mean radius, complete all as specified and as directed.

M&L for Brickwork in CM 1:4, with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed.

M&L for stone walling in CM 1:6 with random rubble, best quality locally available harder stone such as granite, trap or basalt, uncoursed, well bonded, bedded, solidly hearted complete all as specified and directed.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depressin on face from straight edge held against the dressed surface not exceeding 40 mm, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 using water proofing compound on brick/concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be paid and measured seperately.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

Demolition of cement concrete reinforced in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L for Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Keyed pointing in cement mortar 1:4 to random rubble masonry including racking out joints etc, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:3 finished, mixed with water proofing compound, even and smooth without using extra cement on concrete or brick surfaces as in sunken floor complete all as specified and directed. Note : Supply only water proofing compound shall be paid and measured seperately.

M&L for applying waterproof and damp proof treatments using a uniform coat of blown grade bitumen 85/25 @ 1.20Kg per Sqm conforming to IS 702/cold applied bituminious elestomeric coat over a coat of primer in sunken floor including cleaning surfaces complete all as specified and directed.

M&L for priming surfaces with a coat of primer @ 0.70 Kg per sqm over a plastered surfaces in sunken floor complete all as specified and directed.

M&L for APP modified prefabricated five layer water proofing membrane mineral finish, 3 mm thick and weighing not less than 3.6 kg/sqm reinforced with non-woven polyester matt black finished and laid by torch applications of membrane with 100 mm overlap after necessary preparation of surface complete as per manufacturer’s instructions complete as specified in sunken floor.

M&L for 20mm thick CM 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor complete all as specified and directed.

M&L for providing 40mm dia, light grade GI spout at the lowest point with 30cm projection beyound the outer face of the wall in sunken floor complete all as specified and directed.

M&L for lean concrete in cement concrete 1:5:10 type E2 with 40mm graded stone aggregate with as filling in sunken portion complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, light fitting, bell etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc complete all as specified and directed.

Taking down and refixing carefully old distribution board/Sheet Metal Plug Socket Board by with MCB of any type unscrewing from board complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable submain wiring and making good disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed at site.

M&L for pint wiring complete with 1.5 Sq mm (normal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC concealed conduit medium grade with conduit fittings/accessories with provn of MS terminal boxes of suitable size & plastic laminated sheet on top for fixing switches sockets etc, including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor for earth continuity conductor and connected to common earth dolly for the following. Note: Cutting chasing of wall/floor will be measured and paid separately.

(i) One light point controlled by one switch complete all as specified and directed.

(ii) One 5A 2pin/3pin switch socket out let multipurpose on independent Board complete all as specified and directed.

(iii) One bell point controlled by one way switch complete all as specified and directed.

(iv) One light point controlled by two way switch complete all as specified and directed.

All as per item No 162 above but wiring with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F switch piano flush type single pole two way 5/6 Amps complete all as specified and directed.

S&F switch socket combination 5A/16A in 1 flush type complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with one 20 amps SPN MCB complete all as specified and directed.

S&F ceiling roase 3 terminals complete all as specified and directed.

S&F bell/buzzer AC 230 Volts single pole complete all as specified and directed.

S&F 24W LED Batten in extruded aluminium housing with diffuser complete all as specified and directed. Make: Crompton Cat No: LCCLB 24 - CDL or techno-commercially equivalent.

S&F wall mounted 9W LED (2 ft) batten & integrated electronic driver, lamp color white, complete all as specified and directed. Make: Crompton Cat No: LCTL-9-CDL or techno-commercially equivalent.

S&F energy saving 10W LED bulkhead luminairer complete all as specified and directed, Make: Crompton Cat No: LBHP-10-CDL or techno-commercially equivalent.

M&L for submain wiring with 2 runs of FRLS grade PVC copper conductor cable of 6 Sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor of 4 Sq mm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.

S&F energy saving 25W LED Building security light including necessary accessories and GI bracket of suitable size complete all as specified and directed by Engineer-in-Charge. Make: Crompton Cat No LSTS-25-CDL or techno-commercially equivalent.

Cutting chases not exceeding 10 cm girth, painning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring etc, and making good, complete all as specified and directed.

sree devi construction