Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹10.9 L+₹76,647.50 (7.57%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹16.6 L+₹6.5 L (64.3%)Rejected-AOC SHIVANGI NIWAS PO GEETA PEETH CHIMBALHAR PALAMPUR 176071 HP | PALAMPUR | KANGRA | HIMACHAL PRADESH | 176071 | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR TO OTM ACCN AT RMS CHAIL UNDER GE (I) JUTOGH
2023_MES_596467_1
GE (I)/JUT-19 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
RMS CHAIL
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹40,000
Yes
22 Jun 2023
18 May 2023
16 Jun 2023
18 May 2023
14 Jun 2023
31 May 2023
18 May 2023 - 24 May 2023
Amount
Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.
Dismantling timber scantlings over 40 sq cm in section in any position (unframed work) complete all as specified and directed.
Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position fixed with nails etc complete all as specified and directed.
Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.
M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work complete all as specified and directed
M&L for preparation of wood and wood based materials and applying two coats of creosote on new or old wood surface of any description and girth complete all as specified and directed.
M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall,eaves board fixed with self tapping screws complete all as specified and directed.
M&L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre 8mm suitably placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling,size of grid 605 X 605 mm & hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.
Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
S&F IInd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of complete all as specified and directed.
S & F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters fitted to chowkats , windows, ventilators etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and directed
S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed.
S & F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed.
S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 75mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F mild steel barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed
S&F mild steel barrel tower bolt 150mm long stove enameled black with bright bolt complete all as specified and directed
S&F 250mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F 150mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed
S&F 125mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed
S & F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 4mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.
Taking down cement or lime plaster of any description on brick or concrete walls including raking out joints, hacking for key scrubing down with water complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick or concrete surface in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed.
Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x450x7mm thick as in dado, skirting on vertical surface of walls,set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed.
M & L for Vitrified Ceramic tiles dark shade (square / rectangular) of 8-10mm thick, area of each tile not exc. 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl screed bed of 15mm thick in CM (1:6) complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shade (square / rectangular) of 8-10mm thick, area of each tile not exc. 0.36 sqm as in dado, skirting on vertical surface of walls,set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.
M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness laid,bedded and pointed in any mortar in floors, aprons, cooking platform etc. complete all as specified and directed.
M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including laid over 12mm thick in cement mortar (1:3) and ointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for preparation of new or previously treated wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 3mm thick on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed.
S & F in repair 15mm bore CP bib tap fancy type cast copper alloy withcrutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm dia stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.
S&F in repair 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
S&F in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, CP screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S & F in repair 15mm brass CP wall mixer for mixing hot and cold water complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top), three layer, hoisted and fixed in position all as specified in SSR Part- I etc incl dismantling of existing unserviceable tank complete all as specified and directed.
S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (min weight 210gms) complete all as specified and directed
S & F vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap complete all as specfied and directed.
S&F wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.
S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.
Dismantling of wrought Iron or mild steel work of any description complete all as specified and directed.
S & F framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.
R. P. Suppliers and Construction Co.
B S Ranbir and Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .