8579/GWL/E8 REPAIR AND MAINTENANCE OF FURNITURE OF MARRIED ACCN AND OTHER MISC ARTICLES AT BSO YARD UNDER GE GWALIOR

Amount

ALMIRAH LARGE 1/2H & 1/2 SH : DB-4049

Door as per drg and specified & directed.

Shelf as per drg and specified & directed.

Hasp & Stapple as per drg and specified & directed.

Side planks including frame work as per drg and specified & directed.

Melamine Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for Almirah Large 1/2H & 1/2 Sh complete all as specified & directed by Engineer-in-Charge.

ALMIRAH MEDIUM / SMALL 1/2H & 1/2 SH : DB-4042 /3951

Door as per drg and specified & directed.

Shelf as per drg and specified & directed.

Locking arrangement as per drg and specified & directed.

Side planks including frame work as per drg and specified & directed.

Melamine Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for Almirah Medium / Small 1/2H & 1/2 Sh complete all as specified & directed by Engineer-in-Charge.

REPAIR TO ALMIRAH WOODEN LARGE OF SORTS : DB-4155, DB-4116,FD-109(M)

Removing of existing U/S shutter and S & F new shutters of 25 mm thick particle board (Make:- Ecoboard/ Action- Tesa / Greenply) bonded with phenol formaldehyde resin (exterior grade) and having teak face venneered on one side and commercial face on other side with 6 mm thick teak wood beading on three side of shutter all as per shown on drawing and directed by Engineer-in-Charge.

All as per item 3.01 here in before but Removing of existing U/S back and S & F back of 12 mm thick ply wood (Make: Archid Ply/ Green Ply/ Century Ply) BWP grade commercial type all as specified and directed by Engineer-in-Charge.

Taking out old U/S leg and S & F the new leg of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Taking out old U/S shelve and S & F of new shelve of 25 mm thick particle board BWR grade commercial type with 4 mm teak wood beading on front edge of the shelf fixed with nails over 25 mm x 25 mm MP teak wood beading in almirah all as specified and directed by Engineer-in-Charge.

Taking down old U/S MS hinges and S & F of 100 mm long MS ISI marked hinges all as specified and directed Engineer-in-Charge.

Taking down old U/S hasp and staples and S & F aluminium anodized hasp & staples 100 mm long with steel screw all as specified and directed Engineer-in-Charge.

Taking down old U/S handle and S & F new aluminium 125 mm long handle fixed with steel screw all as specified and directed by Engineer-in-Charge.

Polishing two coats of almirah large wooden with melamine polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

M & L two coats of black bituminous paint to bottom external surface of almirah wooden large including preparation of surface all as specified and directed by Engineer-in-Charge.

REPAIR TO ALMIRAH WOODEN MEDIUM OF SORTS :FD-110(M), DB-3595,DB-3050,DB-3959 :

Removing of existing U/S shutter and S & F of new shutters of 25 mm thick particle board (Make:- Ecoboard/Action- Tesa / Greenply) bonded with phenol formaldehyde resin exterior grade and having teak face on other side with 6 mm thick teak wood beading on three side of shutters all as specified and directed by Engineer-in-Charge.

All as per item 4.01 here in before but Removing of existing U/S back and S &F of new back of 12 mm thick plywood (Make: Archid Ply/ Green Ply/ Century Ply) BWP grade commercial type all as specified and directed by Engineer-in-Charge.

Taking down old U/S leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Taking down old U/S shelve and S & F of new shelve of 25 mm thick particle board commercial type with 6 mm thick teak wood beading on front edge of the shelf with nails over 25 x 25 mm MP teak wood beading all as specified and directed by Engineer-in-Charge.

Polishing of almirah medium wooden with melamine polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

M & L two coats of black bituminous paint to bottom external surface of almirah wooden medium including preparation of surface all as specified and directed by Engineer-in-Charge.

REPAIRS TO BIN SOLIED LINEN (SMALL) : FD-244

Dismantling, taking out carefully & replacement of old existing broken playwood (Make: Archid Ply/ Green Ply/ Century Ply) from side of the Bin of any description, in any position & replacement of the same with S&F new side 6 mm thick plywood one side Teak wood grade. shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 5.01 here in before but replacement of TOP plywood with S&F new Top 6 mm Thick plywood one side teak wood

All as per item 5.01 here in before but replacement of TOP rail with S&F new TOP rail for seat made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 5.01 here in before but replacement of bottoms batten frame rail for seat with replacement S&F new bottom and batten rail made out of Ist class hard wood (teak wood)

All as per item 5.01 here in before but replacement of leg with S&F new leg made out of Ist class hard wood (teakwood) complete all as shown on drawings.

All as per item 5.01 here in before but replacement of bottom plank with S&F new bottom plane made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 5.01 here in before but replacement of edging with S&F new edging made of Teakwood (Size 6 x 25 mm) complete as approved and all as shown on drawings.

All as per item 5.01 here in before but replacement of back ply with S&F new 6 mm thick commercial ply BWR Grade complete as shown on drawings.

S & F new stopper screws suitable size Braket made out of Ist class hard wood (teak wood) of size 25mm x 25mm x 150mm complete as approved and all as shown on drawings.

Recanning (complete as per drg. of Bin soiled linen with 2mm wide new plastic cane (Make Saha Brand) in Godrej pattern.

Polishing two coats of old and new surfaces of Bin soiled linen after repairs with melamine polish of approved Make including preparation of surfaces.

REPAIR OF BATH MAT (WOODEN) : FD-254

Dismantling taking existing batten of bath mat wooden S & F new batten made of Ist class teak wood shape & size as per drg and as specified by Engr-in-Charge.

Description all as per item No. 6.01 but replacement of legs of bath mat with S & F of new legs made of Ist class H. W. teak wood shape & size as per drg and as specified and directed by Engr-in-Charge.

Painting with two coats of synthetic enamel white paint to old and new surface of bath mat wooden over a coat of pink primer as approved by Engr-in-Charge.

REPAIRS TO BOOK SHELF OPEN LARGE : DB-4121

Removing of existing U/S back and S &F of new back of 6 mm thick plywood BWR grade commercial type all as specified and directed by Engineer-in-Charge.(Make of BWR plywood :- Archidlam/ Greenlam/ Century).

Removing of existing U/S leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Removing of existing U/S long rail and S & F of new long rail of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Removing of existing U/S side & partition and S & F side & partition 18 mm thick partical board commercial type with 6 mm thick teakwood beading on front edge of the nails 18 mm teak wood beading all as specified and directed by Engineer-in-Charge.

Removing of existing U/S shelve and S & F of new shelve of 18 mm thick particle board commercial type with 6 mm thick teak wood beading on front edge of the shelf with nails over 25 x 25 mm MP teak wood beading all as specified and directed by Engineer-in-Charge.

Removing of existing U/S top & bottom and S & F top & bottom prelaminated partical board all as specified and directed Engineer-in-Charge.

Polishing of Book case wooden with melamine polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

REPAIRS TO COMPOSITE OFFICE TABLES WITH VEENEERED PARTICLE BOARD OF SIZES (1500 X 900 X 750MM), (1200 X 600 X 750MM) ,(1350 X 750 X 750MM) : TP

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1500 x 900 x 750mm of any decription & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make (Make:- Ecoboard/Action- Tesa / Greenply) with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1200 x 600 x 750mm of any decription & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make (Make:- Ecoboard/Action- Tesa / Greenply) with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

Dismantling, taking out carefully & replacement of old existing broken table top of Table 1350 x 750 x 750mm of any decription & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make (Make:- Ecoboard/Action- Tesa / Greenply) with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

Replacement of drawer with S&F new table drawer made out of 20 Gauge PBI sheet made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc. Complete as approved and all as shown on drgs.

Replacement of Lock with S&F new Lock, make VOLTAS pattern of brass 6 levers with Duplicate Key, complete as approved and all as shown on drgs.

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality complete as approved and all as shown on drgs.

Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Preparation of existing decorated surfaces of the table after repairs with removing all dents, filling with putty and Spray painting one coat of synthetic enamel paint with 1st grade quality of paint (External & Internal) as indicated on drgs to be painted complete all as specified and directed by Engineer-in-Charge, material and labour complete, colour shade as approved by GE.

REPAIRS TO CHAIR OFFICE CB DB-3982

Taking out U/S rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out U/S front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out U/S rails and provn of new rails made of 1st class hard wood all as directed.

Taking out U/S stiffeners and provn of new stiffeners made of 1st class hard wood all as directed.

Taking out U/S arm and provn of new arm made of 1st class hard wood all as directed.

Melamine Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for Chair office CB complete all as specified & directed by Engineer-in-Charge.

REPAIR TO FORM WITHOUT BACK :- FD-77(M)

Removing of U/S top from its existing position and S&F new top with 1st class hard wood plank wrought 25mm thick 300mm width & 1525 mm long duly fixed with nuts and bolts and polished all as directed.

Taking out old U/S Stiffener and S & F the new Stiffener and complete all as per drg & specified and directed by Engineer-in-Charge.

Taking out old U/S Leg and S & F the new Leg and complete all as per drg & specified and directed by Engineer-in-Charge.

S & F new Hard Rubber Toe of high quality placed in position as shown in drg.

Welding to frames wherever cracked/broken all as directed

Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint black completed all as per drg & specified and directed by Engineer-in-Charge.

REPAIR TO FORM WITH BACK :- FD-78(M)

Removing of U/S top from its existing position and S&F new top with 1st class hard wood plank wrought 25mm thick 255mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed.

Removing of U/S back from its existing position and S&F new back with 1st class hard wood plank wrought 19mm thick 150mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed.

Taking out old U/S Stiffener and S & F the new Stiffener and complete all as per drg & specified and directed by Engineer-in-Charge.

Taking out old U/S Leg and S & F the new Leg and complete all as per drg & specified and directed by Engineer-in-Charge.

S & F new Hard Rubber Toe of high quality placed in position as shown in drg.

Welding to frames wherever cracked/broken all as directed

Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint black completed all as per drg & specified and directed by Engineer-in-Charge.

REPAIRS TO MIRROR DRESSING GENTS (MAP) : FD/E6/MAP/16

Replacement of back frame with S&F new back frame made out of 50mm x 28mm teak wood members & 12mm thick BWR Ply, made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Replacement of mirror with S&F new mirror of size 600mm x 1200mm x 5.5mm thick (Make : Atul, Swastic, Golden fish) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Melamine Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for Mirror Dressing Gents complete all as specified & directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE OFFICER/CLERK WOODEN DB-4120, DB-4110, DB-4122, DB-4280 , DB-4119

Removing of existing U/S table top and S & F of new table top of prelaminated particle board (Make:- Ecoboard/ Action- Tesa / Greenply) 18mm thick teak finish on one side and other side white exterior grade with 4 mm TW beading all round the table office officer all as specified

Description all as per item No. 13.01 above but for table office clerk wooden.

Replacement of cup board shutter made out of prelaminated particle board 18mm thick teak finish on one side including fixing complete with piano type hinges design and size as shown on drg complete for table office officer/clerk wooden all as specified and directed.

Replacement of leg of teak wood size shape design as shown on drg for table office officer/clerk wooden all as specified and directed.

Replacement of top long rail made out of teak wood size shape & design as shown on drg for table officer all as specified and directed.

Replacement of short rail made out of teak wood size shape & design as shown on drg for table officer all as specified and directed.

Replacement of long rails made out of teak wood size shape & design as shown on drg for table office clerk all as specified and directed.

Replacement of short rails made out of teak wood size shape & design as shown on drg for table office clerk all as specified and directed.

Replacement of drawer made of TW timber complete size shaps and design as shown on drg for table office officer/clerk including one No. 35 mm dia aluminium knob in lieu of wooden knob all as directed.

Replacement of 30 mm dia aluminium knob including taking down wooden knob do all as directed.

Replacement of 30-35 mm wide 70-75 mm long safety pattern aluminium hasp & staple all as specified.

Polishing with two coats of melamine polish on old and new surface including preparing old/new surface of table office officer all as specified.

Polishing with two coats of melamine polish on old and new surface including preparing old/new surface of table office clerk wooden all as specified.

MEAT SAFE SMALL,FD-369/FD-47(M)

Marble top.

Door shutter

Leg frame

Teak wood battens

Scratching the entire wooden pallets of meat safe, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be melamine polish with high gloss finish, after properly cleaned and smoothened the surface.

REPAIRS TO PEG TABLE MAP FD/MAP/11

Dismantling, taking out carefully and replacement of old existing broken top of peg table of any description, & replacement of the same with S&F new top of peg table with Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg and directed by the Engineer-in-Charge.

Replacement of leg with S&F new teak wood leg made to shape complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

Replacement of long rail with S&F new teak wood long rails made to shape complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

Replacement of short rails with S&F new teak wood short rails made to shape complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg etc complete all as specified and directed.

M & L for preparation of old surfaces of peg table by grinding with grinding machine including filling of cavities with putty/ filler/ sealer and applying two coats of melamine polish of approved make with glossy finish by using spray machine complete all as specified and directed.

REPAIRS TO RACK SIDE 3/4 SPACES : FD-408

S & F new back to Rack side 3/4 Spaces steel made of 1mm thick MS sheet of size 840mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

S & F new sides to Rack side 3/4 Spaces steel made of 1mm thick MS sheet of size 355mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

S & F new shelves to Rack side 3/4 Spaces steel made of 1mm thick MS sheet of size 840mmx355mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

Materials and labour of one coat of synthetic smoke grey paint on all steel portion of rack complete all as specified and directed.

REPAIRS TO STOOL DRESSING : FD-252, FD-27 ,282:

Dismantling, taking out carefully & replacement of old existing broken leg of the stool dressing of sorts of any description, & replacement of the same with S&F new leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

Replacement of long rail with S&F new long rail for seat made out of Ist class hard wood (teakwood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of short rail for seat with replacement S&F new short rail rail made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of rubber shoe with S & F new Nylon Buffer of superior quality with steel screws of size 20 mm long complete as approved and all as shown on drawings.

Recanning of stool dressing with 2mm wide new plastic cane

Polishing two coats of old and new surfaces of stool dressing after repairs with melamine polish of approved Make including preparation of surfaces.

Table 5'x2'10" (FD-298)

Top of table made out of 18mm thick prelaminated MDF exterior grade of existing colour with all edges covered with 4 mm thick teak wood beading fixed with adhesive and headless nails.fixing of top shall be done with machine screws from bottom of side rails.all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge.(Make:- Ecoboard/ Action- Tesa / Greenply).

Dismantling the old U/S leg and S & F new leg to shape and size as the existing one, complete all as specified and shown on drawing.

All as per item No 18.02 above but long rail.

All as per item No 18.02 above but short rail.

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws etc. complete all as specified and directed.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

M & L for preparation of old surfaces of table by grinding with grinding machine including filling of cavities with putty/filler/sealer and applying two coats of melamine polish of approved make with glossy finish by using spray machine complete all as specified and directed.

TRESTLE STORE ROOM WOODEN : FD-86 ,41:

Removing /taking out carefully existing U/S Long rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per srl item No. 19.01 but replacing Centre rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per srl item No. 19.01 but replacing Short rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per srl item No. 19.01 but replacing Leg made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

M & L for two coats of cerosote oil to new surfaces after cleaning of tressle SR wooden all as per drg and directed by the Engineer-in-Charge.

M/s Raghav Traders

M/S MUKESH AGARWAL