Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹11.8 Laccepted-finance | accepted-finance |
Tender Value
₹13.9 L
EMD Value
₹17,500
Closing Date
8 Jan 2026, 10:00 pmClosed
Directorate of Municipal Administration
Vijayakumar R
Providing/laying Inter lock Pavers in Govt Higher Primary School at Ward No.82 HDMC
DMA/2025-26/OW/WORK_INDENT52685
DMA/2025-26/OW/WORK_INDENT52685
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
10 documents required · 10 mandatory
₹500
₹17,500
8 Jan 2026
24 Dec 2025
31 Dec 2025
Providing/laying Inter lock Pavers in Govt Higher Primary School at Ward No.82 HDMC
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Column form works consider 70% (UNI SR 2023-24 Vol1 /...
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60% (UNI SR 2023...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Gabbur TS.pdf
Technical Information / Worksheet • 2.51 MB
GENERAL AND TECHNICAL CONDITIONS.docx
Others - GENERAL AND TECHNICAL CONDITIONS • 0.02 MB
Gabbur Adm.pdf
Others - Adm approval • 2.24 MB
kw-1 indent.doc
Tender Document • 0.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .