REPAIR/ REPLACEMENT OF INTERNAL WIRING, FITTING AND FIXTURE IN JCOS/OR MD ACCN AND MT LINES AT CME

Amount

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.2 above but for one multipin 5 amps socket outlet on same board.with other switch

All as per item No.2 above but for one multipin 5 amps socket outlet on independent board with other switch

All as per item No . 2 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F in replacement switch piano, flush type, single pole one way 5 amps.

S & F in replacement bell push flush type single pole one way 5 amps.

S & F in replacement switch piano, flush type, two way 5 amps.

S & F in replacement socket outlet 2 in 1, 5 pin, 5 amps flush type.

S & F in replacement switch socket combination 5 in 1, 5 and 15 Amp flush type.

S & F in replacement ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block.

S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block.

S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet

S&F in replacement electronic dimmers, 450W, 250V flush type on the existing phenolic laminated sheet

S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed

S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete all as specificed and directed

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete all as specified and directed

S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete all as specified and directed

S&F in replacement modular fan regulator step type 120W, 2 module

S&F surface and wall mounted LED batten(LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj

S&F surface and wall mounted LED batten(LED tube light fitting 20W), extruded aluminium housing provided for efficeient heat dissipation with polycarbonate diffuser & integrated electronic driver alongwith LED tube 20 watt and 02 Nos PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No ENDURALINEARNEOBS20WLED840SPCWH or equivalent of Philips/Bajaj

S&F surface and wall mounted LED batten(LED tube light fitting 10W), extruded aluminium housing provided for efficeient heat dissipation with polycarbonate diffuser & integrated electronic driver alongwith LED tube 10 watt and 02 Nos PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No ENDURALINEARNEOBS10WLED830SPCWH or equivalent of Philips/Bajaj

S&F endura gugby NEON- IP 65 environmental friendly, ultra modern energ saving surfae mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 10 Watt incl taking down old UNSV fitting. Make- Havells cat No RUGBYNEONFT10WLED760SSYMBOPC or equivalent of Philips/Bajaj

S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 incl taking down old UNSV one. Make - Havells cat No ENDURACITYLITEPLATSL25WLED757SASYBOPC or equivalent of Philips/Bajaj

S&F decorative wall light fittings(bracket light), CITY 3 made up of polycarbonate suitable for 10 watt LED lamp incl LED lamp incl taking down old UNSV one. Make- Havells cat No LHDL06160099 or equivalent of Philips/Bajaj

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC casing caping of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

Ditto- as per item No 27 above but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity. Make of wire-- Finolex/Havells/Polycab/Plaza..

Ditto- as per item No.27 above but size 2.5 Sqmm two runs and with one run 2.5 Sqmm FRLSH copper wire for earth continuity. Make of wire-- Finolex/Havells/Polycab/Plaza..

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one. .

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S & F in replacement MCB SP 6 to 32 Amps, 230 V A/C incl taking down old unserviceable one..

S & F in replacement MCB SPN 40 Amps, 230 V,AC incl taking down old unserviceable one. Make: ABB/Legrand/ L&T.

S & F in replacement MCB SPN 63 Amps, 230 V,AC incl taking down old unserviceable one. Make: ABB/Legrand/ L&T.

S & F in replacement MCB TPN 63 Amps,415 V,AC incl taking down old unserviceable one. Make: ABB/Legrand/ L&T.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 6 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 4 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iton strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I and directed by Engr-in-Charge.

M&L in replacement of PVC Boards closed recessed of size 4x4x2 inches

M&L in replacement of PVC Boards closed recessed of size 4x7x2 inches

M&L in replacement of PVC Boards closed recessed of size 8x10x2 inches

M&L in replacement of PVC Boards closed recessed of size 10x12x2 inches

M&L in replacement of LED lamp 10 watt

S & F in replacement MCCB Three pole 415V 63 Amps 16 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 125 Amps 16 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 160 Amps 36 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 200 Amps 36 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 250 Amps 36 kA incl taking down old unserviceable one.

Aakar Construction

ganesh electricals and airconditioners

metro electrical services

N AND G CONSTRUCTION

M/S. Niksun Electro-Infra Private Limited

UNIQUE ENGINEERS