E.I.U.S.(Capital)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (Add MF Rs. 1467 x 1.0633 = 1560)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (Add MF Rs. 233 x 1.0633 = 248)

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire (Add MF Rs. 334 x 1.0633 = 355)

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire (Add MF Rs. 439 x 1.0633 = 467 )

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Add MF Rs. 586 x 1.0633 = 623)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way Double door (Add MF Rs. 2315 x 1.0633 = 2462)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (Add MF Rs. 256 x 1.0633 = 272)

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A (Add MF Rs. 435 x 1.0633 = 463 )

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. (Add MF Rs.6855 x 1.0633 = 7289)

Providing and laying earth connection from earth electrde with 6 SWG dia G. I. wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re - filling as required.(Add MF on Rs.287x1.0633=305)

Supplying and fixing following rating double pole (single phase and neutral), 240 V, residual current circuit breaker (RCCB) havng a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A (Add MF Rs. 2722 x 1.0633 = 2894)

P/I/T/C of LED Bulkhead luminiare with polycarbonate housing colour temperature 6500K having wattage 10 W with IP Protection IP65 directly on celing /wall/ic connections with 1.5 sqmm FRLS ISI marked FRLS PVC insulated single core copper conductor cable complete etc as required

S/I/T/C of Exhaust fan of sweep size 300mm ,speed 1350 rpm suitable to work on 220/240v ,50 Hz A.C supply ,ISI certified heavy duty 100% copper winded motor with double ball bearing ,corrosion protection and with rust proof body and blades complete etc.as reqd.(MR).

Supply of Heavy duty Exhaust fan shutter / louver frame made of metal suitable for 300/380 mm exhaust fan finish with grey paint, corrosion protection with rust proof body complete etc as required.

Supply & Fixing of control panel suitable for single phase 1.5HP/1.1kW capacity submersible pumpset with ON/OFF switch Push Buttton type along with indicators,suitable starting and running capacitor with overload relay, digital display for current and Voltage and MCB for Overload & short circuit protection i/c complete connection etc as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Add MF Rs. 2730 x 1.0633 = 2903)

Supplying, installation, testing and commisioning of 50 watt LED street light with new generation energy saving and environment long life versatile powder coated die cast aluminium, IP 66, luminaire efficacy > 100 lm/W, CCT 5700K, CRI > 70, THD < 10%, built-in surge protection 4 kV, External Surge Protection 10 kV, Power factor > 0.95, IK07, the driver should be potted, capable to withstand 440V for 8 Hrs with high power LED light source with secondary lens complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories.

Supplying, Installation, Testing and Commissioning of 4 feet nominal size LED having extruded polycarbonate housing, colour temperature 6500K having wattage not more than 22 Watt and Lumen output not less than 2000 Lumens directly on ceiling/wall i/c connection with 1.5 sqmm FRLS PVC insulated copper conductor, Single Core Cable and earthing etc as reqd. MR

Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

SITC of 2D inlit glow sign board fabricated out of aluminium composite panel board on Four side and front side duly cutout CNC cut for required graphics/inscription/logo and back of cutting sheet mount of suitable thick acrylic coloured sheet . SMD LED Chip modules IP 65 (50000 working hours Life) on LED modules and SMPS Power Supply ( IP67, Input 170-250V AC to 12 Volt DC power suplpy. The Board frame should be fabricated out of 25mm x25mm, 16 gauge(NS) thick MS square pipe section, properly welded and painted as required as approved by Engineer in charge

Please Enable Macros to View BoQ information