Petty repairs and internal plumbing to certain buildings at CME

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling stone slab laid bedded ;and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and directred

M&L 75mm PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directred

M&L 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggregate) and finished even and fair to receive the further treatment complete all as specified and directed.

M&L 75mm PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L 25mm thick rough dressed line stone slab flooring , jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L 20 to 22mm thick granite (of any type) work, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces of size 450x350x7 mm thick set and jointed neat cement slurry incl pointed in white or colour cement to match the shade of tiles, over and incl rendering 15mm thick 1:4 complete all as specified and directred

M&L vitrified ceramic coloured tile 8 to 10 mm thick(square/rectangular) polished, area of each tiles exceeding 0.36 sqm in floor etc, set and jointed in neat cement sluurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No.12 above, but on vertical surface such as skirting, dado etc butbut including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repair stainless steel sink, made out of 1.00 mm thick sheet for kitched with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm all as specified and directed. Make: Nirali/Diamond/Blue King/Kingston/

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal to store.

S&F galvanised tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors.

Refixing 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc)

Cutting chase, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels, etc and cutting chasesfor concealed water tubing and making good, cutting n.exc. 10cm girth in brick walls all as directed.

S&F in repairs vitreous china squatting pan "Orrisa Pattern" size 580x440mm white with integral foot rest(including flushing cistern) but including flush pipe, trap complete all as specified .Make : cera

S&F in repair viterous china wash down water closet pan (pedestal pattern) white (including fixing bolts, flushing cistern and flush pipe) including provision of flush pipe, plastic seat cover for pedestal pan and CP health faucet including two way angle cock complete all as specified and directed. Make : cera

S&F in repair vitrious china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe including pillar tap and stop cock complete all as specified and directed. Make : cera

S&F in repair 15mm dia stop valve chromium fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for pre-cast PCC block masonry type C-1, 1:3:6 exc 10 cm width and set in CM 1:4 complete all as specified and directed.

M&L walling random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed

All as per item No.27 above, but except stone complete all as specified and directed.

M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L machine cut kota stone slab as in flooring 20-25 mm thick over and including 15mm thick (avg thickness) cement screed in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing (granite finish) etc complete all as specified and directed.

M&L machine cut kota stone slab as in skirting 20-25mm thick in riser of steps, skirting, dado and pillar inclu 15mm thick (avg thickness) rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing (granite finish) etc complete all as specified and directed.

M&L coloured chequred cement concrete tiles 30cm x 30cm x 25mm thick set pointed with neat cement slurry with grey cement and pigment in floorsover and including 15mm thick screed bed in cm 1:4 complete all as specified and directred

M&L sand filling under floors or in foundation including watering as required.

M & L machine pressed precast concrete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade as decided by Engineer-in-Charge.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all as specified and directed

Dismantling water tanks and removing to store capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed.

S&F For 1000 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Dismantling water tanks and removing to store capacity exc 250 & n.exc 500 ltrs complete all as specified and directed.

S&F For 500 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F For 750 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L 15mm thick cement plastering on stone masonry surfaces in CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 including taking down plastering of any description complete all as specified and directred

M&L 15mm thick cement plastering on stone masonry surfaces in CM (1:4) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 including taking down existing plastering of any description complete all as specified and directred

S&F for aluminium anodized three track slinding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue including taking down existing old window of any description complete all as sspecified and directed.

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as sspecified and directed.

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following incl taking down.:- (a) Aluminium colour anidised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002.Make-Jindal (f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass (Colour) 5mm thick Make : Saint gobain midgaurd (k) Floor spring , Make Sandu Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge.

M& L PCC 1:2:4 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

Extra over rates of block board or veneered particle board for external teak wood 18/19mm lipping 6mm thick fixed with nails

M&L 5mm thick rendering on concrete surface in CM 1:3 including taking down existing plaster complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

M&L preparation of newly plastered or unplastered surfaces on wall surfaces and applying complete wall with 3mm POP/Birla putty and making smooth surfaces and applying two coats of exterior emulsion paint 100% acrylic (Apex) over a coat of primers as per manufactured instruction complete all specified and directed.

M&L for preparation of newly plastered surfaces ceiling and applying complete ceiling with 3mm POP/Birla putty and making smooth surface and applying three coats of white wash over a coat of POP/Birla putty all as specified and directed.

Taking down chowkat exc 1.5 sqm and n.exc 4 sqm complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints etc. complete all as specified and directed

S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed .

S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directred

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S & F For pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

S & F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified and directred

M&L 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed etc. complete all as specified and directred

M&L 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed etc. complete all as specified and directred

S&F 125mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long Aluninium alloy, anodised, sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Special Note :

Contrator has to emplot skilled/unskilled tradesman with adequate experience & required documents to be submitted to office.

Labour should wear contractors uniform with firm logo.

Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site.

Site clearance shall be done by contractor after finishing work.

All Scarps will be done with mechanical scaper

Mechanical scaper should be deposit in our store at the time of sample approval

Mukund Engineers and Contractors

Sunrise Traders

M/s G.N.Shah

N AND G CONSTRUCTION