Tenkasi District mplementation of Jal Jeevan Mission to provide Functional Household Tap connection to Rural Households in Ariyanayagipuram Village Panchayats in Sankarankovil Panchayat Union in package no83

Amount

1.Providing New Borewell and Extension of Pipeline and FHTC @ Achampatti in Ariyanayagipuram Panchayat

DISTRIBUTION SYSTEM

Delivery Pipeline & Pumpset Arrangements

Supply and delivery of 63 mm dia 4 KSC PVC pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling the excavated portions for Pipe Laying works with excavated earth as per ss20 B etc., complete.

Labour charges for Laying of GI, PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing etc., complete.

PUMPING SYSTEM

Pumping Pipeline & Pumpset Arrangements

Drilling of 180 mm dia deep borewell in Soft Soil area including labour charges and transportation charges

Up to casing pipe

Supply and delivery of 180 mm dia 6 ksc casing pipe including all cost and conveyance etc

S/D of 7.5 HP submersible motor pump set (Three Phase) with duty condition of 300LPM against 60m head etc., complete.

S/D of Panel Board (Three Phase) for 7.5 HP Submersible motor pump set

S/D of 3core 4mm2 flat submersible cable

S/D of 50mm dia GI Pipe

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-143

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Providing FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and Delivery of Flow Control Valve 20LPCD 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting and Restoring the CC Road

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

2.Construction of 60000 Lit OHT New Borewell Extension of Delivery pipe line at Arunachalapuram village in Ariyanayagipuram Panchayat

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

First depth of 2m

2nd depth of 2m

Supply and Filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or suitable size of BG 10 stiffened with welded MS angles of size 25mmx25mmx3mm of boarfing,laid over silver oak joints of size 10cmx6.5 cm spaced at 90 cm center to center and supported by casuarina props 10 cm to 13 cm dia spaced at 75 cm center to center complying with standard specification etc complete and as directed by departmental officers

PLANE SURFACE:-

Below GL

For column footing and GL BRACE

GL 0 to 3.30 m for BRACE I

5.30 to 6.30m for brace II

6.30 to 7.30m for brace II

CURVED SERFACE

0 to 3.30m for side wall and floor slab sides and haunch

3.30 to 4.30m for side wall,roof slab sides

SQUARE COLUMN

Below GL

Above GL (0.000 - +3.30m)

Above GL (+3.30 - +4.30m)

Above GL (+4.30 - +5.30m)

Above GL (5.31 - +6.300m)

Above GL (+6.31 - +7.30m)

Supplying fabiricating and placing in position of HSD Steel rods for reinforcement including the cost of steel and binding wire etc complete and as directed by departmental officers .

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Painting two coats with approved ready mixed Plastic Emulsion paint of First class over one coat of primer coat over cement plastered exposed surface of the reservoir including curing preparing the surface and curing etc complete and as directed by the departmental officers

providing MS Ladder and Hand rails arrangements in 60000 lit capacity OHT WITH 12.00 M STAGING HEIGHT

Providing manhole cover of size 060 x 0.60m in RCC 1 : 1.5 :3 with suitable reinforcement 50 x 50 x 6mm MS angle fixed along edges and as directed by the departmental officers

supply and delivery of following pipes and specials forOHT Connection

supply of GI pipes for OHT connection 65mm dia

supply and delivery of GM Gate valve 65mm size

supply and delivery of 65mm GI TEE size

supply and delivery of 65mm GI Elbow

supply and delivery of 65mm GI bend

Refilling of the foundation with excavated soil in layers of the with including ramming watering etc

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

First depth of 2m

2nd depth of 2m

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Collection and supply of 40mm HBG metal and filling in to the recharge pits

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

DISTRIBUTION SYSTEM

Delivery Pipeline & Pumpset Arrangements

Supply and delivery of 63 mm dia 4 KSC PVC pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling excavated earth including all cost

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

PUMPING SYSTEM

Pumping Pipeline & Pumpset Arrangements

Drilling of 150 mm dia deep borewell in Soft Soil area including labour charges and transportation charges

Up to casing pipe

Depth upto end of borewell

Supply and delivery of 180 mm dia 6 ksc casing pipe including all cost and conveyance etc

S/D of 5 HP submersible motor pump set (Three Phase) with duty condition of 300LPM against 60m head etc., complete.

S/D of Panel Board (Three Phase) for 7.5 HP Submersible motor pump set

S/D of 3core 4mm2 flat submersible cable

S/D of 50mm dia GI Pipe

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-143

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Providing FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and Delivery of Flow Control Valve 20LPCD 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting and Restoring the CC Road

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chlorination Distinfection - Common Salt as per TWAD SOR Page No 57 Clause 21.2

3.Providing New Borewell and Extension of Pipeline and FHTC @ Meenachipuram village in Ariyanayagipuram Panchayat

DISTRIBUTION SYSTEM

Delivery Pipeline & Pumpset Arrangements

Supply and delivery of 63 mm dia 4 KSC PVC pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling excavated earth including all cost

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

PUMPING SYSTEM

Pumping Pipeline & Pumpset Arrangements

Drilling of 150m dia deep borewell in Soft Soil area including labour charges and transportation charges

Depth Up to casing pipe

Depth Up to End of borewell

Supply and delivery of 180 mm dia 6 ksc casing pipe including all cost and conveyance etc

S/D of 5 HP submersible motor pump set (Three Phase) with duty condition of 300LPM against 60m head etc., complete.

S/D of Panel Board (Three Phase) for 7.5 HP Submersible motor pump set

S/D of 3core 4mm2 flat submersible cable

S/D of 50mm dia GI Pipe

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-143

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Providing FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and Delivery of Flow Control Valve 20LPCD 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting and Restoring the CC Road

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

4.Providing New Borewell and Extension of Pipeline and FHTC @ Periyasamiyapuram village in Ariyanayagipuram Panchayat

DISTRIBUTION SYSTEM

Delivery Pipeline & Pumpset Arrangements

Supply and delivery of 63 mm dia 4 KSC PVC pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling excavated earth including all cost

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Providing FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and Delivery of Flow Control Valve 20LPCD 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting and Restoring the CC Road

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

PUMPING SYSTEM

Pumping Pipeline & Pumpset Arrangements

Drilling of 150m dia deep borewell in Soft Soil area including labour charges and transportation charges

Depth Up to casing pipe

Depth Up to End of borewell

Supply and delivery of 180 mm dia 6 ksc casing pipe including all cost and conveyance etc

S/D of 5 HP submersible motor pump set (Three Phase) with duty condition of 300LPM against 60m head etc., complete.

S/D of Panel Board (Three Phase) for 7.5 HP Submersible motor pump set

S/D of 3core 4mm2 flat submersible cable

S/D of 50mm dia GI Pipe

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-143

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M.AMIRTHARAJ