Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5 L
EMD Value
₹12,500
Closing Date
19 May 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Shyam
Drilling of Borewell in Ward no 8 in Sista Layout Bidadi TMC
DMA/2025-26/OW/WORK_INDENT39702
DMA/2025-26/OW/WORK_INDENT39702
Open
Other Works
Two Tender Document System(Two Cover)
DMA Town Municipal Council Bidadi
1 document required · 1 mandatory
Satisfactory completion as a prime contractor for at least any construction work to an extent of 90% of the cost of the work(not less than 80%)
Similar Nature of work done certificate
PWD Department Registration Certificate
Executed in any one year,80% (for a continues period of 12 months) the following minimum quantities of work.1 Borewell No 1 ,2)12.50HP Motar pumps No 1,3)GI Pipes Mtr 200
Liquid assets and/or availability of credit facilities of not less than Rs.1.50 lakhs (Credit lines/letter of credit/certificates from Nationalized/Scheduled banks for meeting the fund requirement for the work in the format given below
submit Quantity executed certificate of work
To qualify for award of this contract, each tenderer in its name should have in the last five years (2020-21 to 2024-25)Achieved in at least one financial years an average annual financial turnover of Rs.5.00Lakhs
₹500
₹12,500
4 May 2025
4 May 2025
21 May 2025
16 May 2025
Drilling of Borewell in Ward no 8 in Sista Layout Bidadi TMC
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034- 2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary a...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials, tools a...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar: Uni SR 2023-24 vol-5 Pg No129 It No11.6.6 (N090F)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Ward No 08 tender doc (1).docx
Tender Document • 2.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .