SPECIAL REPAIR FOR RENEWAL AND REPLACEMENT OF EM EQUIPMENT AGAINST BER AT JASAI UNDER GE (A) BARMER

Amount

Supply, install, testing and commisioning of submersible pump set, 180 LPM discharge with multistage impellers upto 120 mtr head with suitable capacity of electric driven submersible motor 415 volts, 3 phase for open well complete all as specified and directed.

M&L for submersible pvc insulated flat cable with multi stranded copper conductor 6.0 sqmm, 3 core complete all as specified and directed.

M&L for Online star delta starter suitable for submersible motor of capacity 10-15 HP with all metering protection, voltmeter, ammeter, indicators with underload/over load protection, dry run & Single phase protection, suitable size of power capacitors, internal copper wiring with auto/mannual mode switch etc complete all as specified and directed.

Supply, install, testing and commisioning Centrifugal pumping set, directly coupled with electric driven 415 volts, 3 phase copper wound induction motor complete, discharge capacity 1200 LPM with 45 mtr Head @ 1450 RPM mounting on MS base plate of suitable size all as directed. Make : Kirloskar/KSB/Texmo. Note:- The rate quoted is inclusive of suitable capacity of online star delta starter with all safety protections, voltmeter/ammeter etc and PCC foundation as per OEM instructions complete all as specified and directed.

Supply, install, testing and commisioning of copper wound transformer step down, outdoor type complete with standard fittings, HT 11 KV, 3 phase, LT 433 volts, 3 phase 4 wire with off load tapping on HT side to vary secondary voltage with limit all as per IS:1180 : 2014, EEL-II of capacity 160 KVA complete all as specified and directed. Note:- (a) The trasformer should be installed on existing plinth or 2/4 pole structure at site. (b) The rates include for supplying transformers with standard fittings and installing complete including all jointing materials, connecting with electrical system, earthing, testing and commissioning but exclude connecting cables, steel mounting fabrications, earthing & P.CC if any, which shall be measured separately. (c) The transformer will have its initial oil filling to appropriate level (Cost of oil including testing with desired dielectric strength included in supplied and installed rates).

M/s godara infratech and power industries

M/s Shiv Builder and Suppliers

M/s Malinath Electricals