Routine maintenance civil work to staff quarters and office building at Noida

Amount

RATE FOR FIRST YEAR

Patch plastering with C.M 1:4 (1Cement, 4 medium sand) 15mm & 20mm thick to walls and ceiling as required and wherever directed at all heights including dismantling old loose/ damaged plaster and disposal of debris to dumping ground, curing, scaffolding, supply of all labour, tools and materials etc complete.

White/colour washing on ceiling and wall surfaces two coats to give an even surface at all heights after thoroughly removing all loose scales and other foreign matter, cleaning and brooming the surface of all dirt, filling the pot holes etc., and cleaning the droplets after white washing all as directed, cost of all materials, labour, tools, scaffolding etc; complete.

Painting two coats on steel/wood work on previously painted doors, windows, ventilators, M.S. Grills and Grill doors at all heights with synthetic enamel paint of approved first quality and colour to (Shalimar - super lac, Berger - Luxol, Asian - Apcolite, J & N - Robbiclac) give an even shade after thoroughly cleaning the surface of all dirt, dust, loose scales, grease, other foreign matter etc; with wire brush/ emery paper/scrappers etc, preparation of surface including applying putty and primer wherever required all as directed, including cost of all materials, labour, tools, scaffolding etc; complete

Doors, windows, ventilators

M.S. Grills & Grill doors

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface, after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Finishing walls with water proofing cement paint of approved 1st quality, brand and shade (Asian, Snowcem, Berger) two coats at all heights, to give an even shade after thoroughly brushing the surface with sand paper, wire brushes/ scrappers to remove all dirts, spots, loose pieces of scales/softened paint, cleaning with fresh water, preparation of surface including filling the pot holes with putty, applying touching up with WPC paint on new patch plastered surface, cleaning the droplets all as directed, including the cost of all materials, scaffolding, curing, labour, tools etc. complete.

Wall painting two coats with plastic emulsion paint of approved 1st quality and brand (Asian, Berger, J&N) and colour on previously painted wall surface at all heights to give an even shade at all heights after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, applying putty wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Distempering two or more coats with oil bound distemper of approve 1st quality, brand and shade (Asian, Berger, J&N) at all heights to give an even shade after thoroughly brushing the surface with sand paper/scraping, cleaning all dirt, loose scale, preparation of the surface/including filling pot holes applying putty etc. where ever required, supply of all materials, scaffolding, labour, tools etc. complete.

Repairs to cracked portion of RCC chajja, roof slab projection in C.C. 1:2:3 (1cement, 2 coarse sand and 3 graded stone aggregate of 20 mm down size) including dismantling the cracked portion, removing loose cement concrete, cleaning scaffolding, curing, supply of all labour, materials, tools etc complete.

Petty repairs to damaged door, window, ventilator shutter as directed including taking out the old damaged member and refixing the same after repairing the damaged member with wood of approved quality, supply of all labour, materials, tools etc complete

Supply and fixing oxidized M.S. door, window fittings of approved quality after removing the damaged fittings and refixing the new one supply of all labour, materials, tools and necessary welding etc complete.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass door closer

Aluminum door closer

Polishing with French polish on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth supply of all labour, materials, tools etc complete.

Renewal the existing, door, window, ventilator glass putty including taking out loose putty, nails etc at all heights, providing new putty supply of materials, tools, labour etc complete.

Replacing the broken/damaged glass panes with new glass panes (Plane /Frosted) with nails, putty at all height including removing the broken glass panes, supply of all labour, materials, tools etc complete.

3mm thick

4mm thick

6 mm thick

Providing and fixing G.I. mesh (85 G) to doors and windows shutters, after removing old damaged/broken G.I. mesh, with M.S. beading of size 15mm x 4mm and fixing screws including fabrication, welding, grinding etc, painting with two coats of S.E. paint of approved quality over a coat of primer, preparation of surface as directed including supply of all labour, tools, materials etc complete.

Providing and fixing lock of approved quality to grill door after removing old/damaged lock including supply of all labour, tools, materials, welding etc complete.

Applying wax polish on previously polished wooden doors, windows to give an even shade including cleaning the surface of all dirt, dust and sand prepared smooth including cost of all materials, labour, tools etc completc.

Providing and fixing moulded beading of 2nd class teak to doors and windows frames as directed with fixing screws, glue etc polishing making good any damage while working, including cost of all materials, labour, tools etc complete.

50mm x 12mm

25mm x 12mm

Cutting grass, ranking into heaps, removing off the premises and uprooting of rank vegetation grass, brush wood and removing the debris from the sunshades etc including supply of all labour, tools etc complete.

Providing and fixing aluminum step edging 'L' shape of size 38mm x 12mm x 3mm thick to stairs including cutting RCC/ Brick steps for fixing aluminum step edging and make good to match the surroundings including supply of all labour, tools, materials etc complete.

Providing and fixing Angle frames for doors/windows and ventilators of mild steel angle sections, joints, mitred and welded with 15 x 3mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x10 cm of 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm nominal size) or with wooden plugs and screws or plug and screws or with fixing clips or with bolt and nuts as required including fixing necessary butt hinges and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Replacement of broken / damaged doors shutter with ready made flush door shutter 40mm thick of approved quality including all fittings, locking arrangements, welding hinges to angle iron frame including painting cost of all materials, tools, labour etc complete.

Minor repairs to doors, windows and ventilators shutters, frames etc including supply of all labour, tools etc complete. (Which will not require welding machine)

Repairs to existing doors and windows with electrical welding including removal of doors and windows frames and same to be fixed in same position after repairing as directed making good the walls etc, supply of all labour, tools, welding machine etc. complete.

Repairs to PVC shutter including fixing of new fittings etc after removal of damaged fittings supply of labour; tools etc complete.

Repairs to steel cupboard/showcase, storage cabinet shutters as directed including taking out the old damaged members and refixing the same after repairing the damaged member of approved quality, supply of all labour, tools, materials etc complete. (Payment will be made for the replaced member only)

Replacing the sunmica of cupboard/showcase/storage cabinets shutter and frames after removal of old damaged sun mica including supply of all labour, tools, materials etc complete.

Supply and fixing cupboards/showcase/storage cabinets fittings of approved quality after removing the damaged fittings and fixing the new one supply of all labour, materials, tools etc complete.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass 6mm to show case

iGlass knob for show case

Hasps and staple

Providing and fixing of fancy type door handle with lock with necessary screws etc. complete as per directions of Engineer-in-charge

Providing and fixing of fency type premium quality hinges for kitchen cabinet shutter etc all complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminum sheet 1.6 mm thick to door shutter including nails etc supply of all labour, materials, tools etc complete.

Providing and laying CC 1:2:4 door sill of size 2" x3" including plastering with CM 1:4 supply of all labour, tools, materials, shuttering, curing etc complete.

Repairs to wall/RCC cracks in cement mortar 1:3/CC 1:2:4 after cutting to V-grove, cleaning out, wetting and grouting with CM 1:3 including supply of all labour, tools, scaffolding materials etc.

Grinding and polishing of mosaic/terrazo floors and skirting first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing granite stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size and shape, laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing edge moulding to granite stone counters, Vanities, window sills, facia etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge for Granite Stone including cost of supply of all labour, materials, tools etc complete.etc at all levels

Regrading terracing of mud phuska covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phuska to proper slope relaying mud plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement; 3 sand) including supply of all labour, materials, tools etc complete.

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with SE paint of approved brand and manufacture as required on old work including supply of all labour, tools, materials etc complete.

50mm dia pipes

75mm dia pipes

100mm dia pipes

150mm dia pipes

Providing gola 75 x75 mm in cement concrete 1:2: 4 including finishing with cement mortar 1:3, including supply of all labour, tools, materials etc complete.

Repairs to the RCC chajja/sunshade with C.C. 1:2:4 after removal of broken concrete as directed, including necessary scaffolding all labour, tools & plants, curring etc complete.

Greasing the rolling shutter to make easy smooth movement of rolling shutter as directed including minor repair/welding etc supply of all labour, tools, materials etc complete.

Demolition of brick work in cement mortar carefully without damaging the adjacent one including stacking of serviceable materials and disposal of unserviceable material to the dumping ground, as directed, supply of all labour scaffolding, tools and plants etc complete.

Demolishing RCC work carefully without damaging the adjacent one including disposal of unserviceable materials to the dumping ground as directed, supply of all labour, scaffolding, tools and plants etc complete.

Brick work masonry with bricks of approved quality in super structure at all heights and wherever required in CM 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Half brick work masonry with bricks of approved quality in super structure at all heights and wherever required in C. M. 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Replacement of wood lipping of size 35x12mm in the existing door shutter including removing shutter for attending the work and re-fixing the same in position with brass screw wherever required. Supply of all labour, tools, materials etc. complete.

Removal and cleaning of debris accumulated over the RCC sunshade to maintaining the free flow of rainwater at all heights, including disposal of the same to the dumping ground as directed and supply of all labour, tools, scaffolding etc complete.

Renewal of rubber beading for glass of aluminum door/window / partition etc.including supply of all labour, materials, tools, scaffolding etc complete.

Refixing of storage cabinet including all necessary fittings including supply of all labour, materials, tools, scaffolding etc complete.

Providing and fixing M.S. grills of required pattern as per drawing at all heights, joints, mitred and welded with 15 x 3mm lugs, 10cm long embedded in C.C. block 15 x 10 x10 cm including cutting fabrication finishing etc applying a coat of metal primer all as directed and as per standard specifications, including cost of all materials, fittings welding, scaffolding labour, tools etc. complete.

Providing and fixing steel glazed windows and ventilators of standard rolled steel section as per existing pattern at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or welded to the existing steel frame at all heights including providing and fixing glass panes of 4mm thick with glazing clips and special metal glass putty of approved make including all fittings, fixtures, hinges/pivots etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.

Providing and fixing New G.I Mesh jali with Angle shutter in existing angle frames for doors/windows and ventilators of mild steel angle sections, M.S Flat,joints, mitred and welded and as required including fixing necessary butt hinges,aldrops,handles,locking arrangement system and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Providing/Laying of mosaic/terrazo floors and skirting after dismantling damage existing floor and skirting with grinding and polishing first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing New 50 mm dia m.s pipe with vertical square bar railing in verandah at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or including all fittings etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.( 0.90m height )

Supplying & placing TMT steel reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying R.C.C. 1:1½:3 (1Cement: 1½ River sand: 3 stone aggregate of 20 mm nominal size) for R.C.C. work of building upto floor all level(ground+3 Level ) including batching, mixing, laying, compacting ,cost of centering, shuttering, finishing to the exposed faces with10 mm thick plaster in C.M 1:3 (1Cement: 3 River sand) cost of supply of all materials, labours, tools & plants, curing & all other charges etc. complete..

Providing and laying in position cement concrete of grade 1:2:4 ( 1 cement : 2coarse sand zone-III : 4 graded stone aggregate 20mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level including supply of all labour, tools and plants, scaffolding curring etc. complete.

Providing and fixing in position Aluminium door with Powder coated aluminium sections of 63.50x38.10x 2.50 mm , 85 x 44.45 x 3.00 mm, Glazing Plate and snap Beading etc including providing aluminium composite panel, all required screws, nut bolt, fixure such as aluminum sliding doorbolt, door stoper etc including cost of all materials, labour, tools, scaffolding etc; complete as directed by Engineer incharge.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 25 mm thick

Premium acrylic smooth exterior paint with silicon additives of required shade, including double scaffolding system etc ( Two or more coats applied @1.43ltr/10 sqm over & including priming cotat of exterior primer applied @2.20 kg /10sqm ) at all hieghts to given and even shade etcm . wherever required including supply of all materials labours toolsall complete as per direction of engineer in charge.

Providing and placing in position 65 mm thick factory made machine batched & machine mixed Precast RCC perforated drain covers, RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering,inforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, including cleaning of drain and disposal of Malba,Providing CC bed 100mm thick of 250mm wide for resting of drain covers , making opening of drain etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing Chromium Plated brass curtraain rods of 25 mm duaneter & 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc, whenever necessary etc. including supply of all labous, material tools etc, completet as directed by the engineer in charge.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of four tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 125x38.10x1.74 mm Top and side track section 122x31.75x1.20mm. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 92x31.75x1.30 mm at weight 1.070kg./mtr.Top and side track section 92x31.75x1.30mm at weight 0.933kg/mtr. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Supply and fixing steel showcase of approved quality and shade fabricated of MS sheet of approved quality as per drawing using 18 gauge for shutters rack and bottom 22 gauge for sides top and back. Providing sliding glazed shutter with 5mm glass in the middle portion, providing handle, knobs hasp & staple etc. all of approved quality applying spray painting with two coats of synthetic enamel paint of approved quality over a coat of metal primer preparation of surface all as per standard specification, finishing the surface teak grain shade including removing the existing cupboards etc finishing with cement plastring after fixing new one as per existing patern or as per drawing & as directed cost of all materials , labour, tools etc. completed.( size of showcase size 80 cm x 210cmx33cm.=1.68 sqm.)

Providing and fixing factory made PVC door frame of size 50x47 mm with awall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 no.of 150mm long brackets of 15x15 mm M.S, square tube, the verticle door frame profiles to be reinforced with 19x19 mm M.S square tube of 19 gauge ,EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S screws of 65 / 100mm size , complete as per manufaturers specification and of Engineer-in charge. including all labour,materials & tools etc complete. ( Syntax make )

Providing and fixing 30mm thick factory made PVC door shutter made of styles and rails of UPVC profile section of size 30mmX60mm and wall th8ickness 2mm (.02mm tolrency) with inbuilt decorative moulding, adjoying on one side. The stryles and rails with plastic bracketes of size 75X20mm and welded at the corners. The sides of the shutters restricted by increasing galvized MS tube of size 25mmX20mm and 1mm (0.1mm tolrency) wall thickness. The lock rail made up of Hsection and UPVC profile section of size 30mmX100mm and 2mm (0.2mm tolrency) wall thickness welded to the shutter dstsyle with UPVC profile section. Single pannel of size not less than 620mm having overall thickness of 20mm and 1mm+0.1mm wall thickness with 20mm panell bearing of suitable sizze glasses ( 4mm thick plain glass) lower section, lower frame of suitable size as per manufacturer specification and direction of Engineer in charge.

Wall painting with premium Acrylic Emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture over and including a coat of water thinnable cement primer of approved brand and manufactur to give an even shade for preparing the surface properly & then cleaning the cdement painting spots on the floors, furnitures, doors & window etc. as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the even and smooth complete. As and whereever directed of approved quality and manufacture including, cost of all materials, labour, tools, scaffolding etc; complete

Providing and laying vetrified floor tiles of size 600mmx600mm size with water absorption less then 0.08% and conforming to IS 15622 of approved make ( Johnson /Kajaria /Nelco), in all colours and shades laid on 20mm. thick cement mortar 1:4(1cement,4coarse sand), including grouting the joints with white cement and matching pigments etc. In true line and level and joints filled with white cement and matching pigments, including supply of all labour, tools and plants, materials and finishing etc. complete as directed by the Engineer in charge.

Providing and fixing 6 mm thick glazed tiles 200mmx300mm of approved quality (design printed) and colour of approved size laid over 15 to 25 mm thick base C. M. 1:4 (1 cement, 4 coarse sand) and jointed with grey/white/matching colour cement slurry as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding curing etc. complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all materials, labours etc., complete as per direction of Engineer-in-charge at all floor four level

Scrape value for the following accessories after dismantling and making surface good.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass/ aluminum door closer

Scrape value for G.I. mesh with M.S. beading etc. complete.

Scrape value for damaged lock etc. complete.

Scrape value for flush door shutter, cupboard, shorage cabinet shutter etc. complete

Scrape value for damaged PVC shutter etc. complete

Scrape value for the following accessories.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass knob for show case

Hasps and staple

Scrape value for damaged M.S grills etc. complete for

Scrape value for damaged steel glazed windows and ventilators etc. complete

Scrape value for damaged m.s jali with angle shutter for door etc. complete

Scrape value for damaged 50mm pipe railling etc. complete

Scrape value for all type of false ceiling etc. complete

RATE FOR SECOND YEAR

Patch plastering with C.M 1:4 (1Cement, 4 medium sand) 15mm & 20mm thick to walls and ceiling as required and wherever directed at all heights including dismantling old loose/ damaged plaster and disposal of debris to dumping ground, curing, scaffolding, supply of all labour, tools and materials etc complete.

White/colour washing on ceiling and wall surfaces two coats to give an even surface at all heights after thoroughly removing all loose scales and other foreign matter, cleaning and brooming the surface of all dirt, filling the pot holes etc., and cleaning the droplets after white washing all as directed, cost of all materials, labour, tools, scaffolding etc; complete.

Painting two coats on steel/wood work on previously painted doors, windows, ventilators, M.S. Grills and Grill doors at all heights with synthetic enamel paint of approved first quality and colour to (Shalimar - super lac, Berger - Luxol, Asian - Apcolite, J & N - Robbiclac) give an even shade after thoroughly cleaning the surface of all dirt, dust, loose scales, grease, other foreign matter etc; with wire brush/ emery paper/scrappers etc, preparation of surface including applying putty and primer wherever required all as directed, including cost of all materials, labour, tools, scaffolding etc; complete

Doors, windows, ventilators

M.S. Grills & Grill doors

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface, after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Finishing walls with water proofing cement paint of approved 1st quality, brand and shade (Asian, Snowcem, Berger) two coats at all heights, to give an even shade after thoroughly brushing the surface with sand paper, wire brushes/ scrappers to remove all dirts, spots, loose pieces of scales/softened paint, cleaning with fresh water, preparation of surface including filling the pot holes with putty, applying touching up with WPC paint on new patch plastered surface, cleaning the droplets all as directed, including the cost of all materials, scaffolding, curing, labour, tools etc. complete.

Wall painting two coats with plastic emulsion paint of approved 1st quality and brand (Asian, Berger, J&N) and colour on previously painted wall surface at all heights to give an even shade at all heights after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, applying putty wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Distempering two or more coats with oil bound distemper of approve 1st quality, brand and shade (Asian, Berger, J&N) at all heights to give an even shade after thoroughly brushing the surface with sand paper/scraping, cleaning all dirt, loose scale, preparation of the surface/including filling pot holes applying putty etc. where ever required, supply of all materials, scaffolding, labour, tools etc. complete.

Repairs to cracked portion of RCC chajja, roof slab projection in C.C. 1:2:3 (1cement, 2 coarse sand and 3 graded stone aggregate of 20 mm down size) including dismantling the cracked portion, removing loose cement concrete, cleaning scaffolding, curing, supply of all labour, materials, tools etc complete.

Petty repairs to damaged door, window, ventilator shutter as directed including taking out the old damaged member and refixing the same after repairing the damaged member with wood of approved quality, supply of all labour, materials, tools etc complete

Supply and fixing oxidized M.S. door, window fittings of approved quality after removing the damaged fittings and refixing the new one supply of all labour, materials, tools and necessary welding etc complete.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass door closer

Aluminum door closer

Polishing with French polish on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth supply of all labour, materials, tools etc complete.

Renewal the existing, door, window, ventilator glass putty including taking out loose putty, nails etc at all heights, providing new putty supply of materials, tools, labour etc complete.

Replacing the broken/damaged glass panes with new glass panes (Plane /Frosted) with nails, putty at all height including removing the broken glass panes, supply of all labour, materials, tools etc complete.

3mm thick

4mm thick

6 mm thick

Providing and fixing G.I. mesh (85 G) to doors and windows shutters, after removing old damaged/broken G.I. mesh, with M.S. beading of size 15mm x 4mm and fixing screws including fabrication, welding, grinding etc, painting with two coats of S.E. paint of approved quality over a coat of primer, preparation of surface as directed including supply of all labour, tools, materials etc complete.

Providing and fixing lock of approved quality to grill door after removing old/damaged lock including supply of all labour, tools, materials, welding etc complete.

Applying wax polish on previously polished wooden doors, windows to give an even shade including cleaning the surface of all dirt, dust and sand prepared smooth including cost of all materials, labour, tools etc completc.

Providing and fixing moulded beading of 2nd class teak to doors and windows frames as directed with fixing screws, glue etc polishing making good any damage while working, including cost of all materials, labour, tools etc complete.

50mm x 12mm

25mm x 12mm

Cutting grass, ranking into heaps, removing off the premises and uprooting of rank vegetation grass, brush wood and removing the debris from the sunshades etc including supply of all labour, tools etc complete.

Providing and fixing aluminum step edging 'L' shape of size 38mm x 12mm x 3mm thick to stairs including cutting RCC/ Brick steps for fixing aluminum step edging and make good to match the surroundings including supply of all labour, tools, materials etc complete.

Providing and fixing Angle frames for doors/windows and ventilators of mild steel angle sections, joints, mitred and welded with 15 x 3mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x10 cm of 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm nominal size) or with wooden plugs and screws or plug and screws or with fixing clips or with bolt and nuts as required including fixing necessary butt hinges and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Replacement of broken / damaged doors shutter with ready made flush door shutter 40mm thick of approved quality including all fittings, locking arrangements, welding hinges to angle iron frame including painting cost of all materials, tools, labour etc complete.

Minor repairs to doors, windows and ventilators shutters, frames etc including supply of all labour, tools etc complete. (Which will not require welding machine)

Repairs to existing doors and windows with electrical welding including removal of doors and windows frames and same to be fixed in same position after repairing as directed making good the walls etc, supply of all labour, tools, welding machine etc. complete.

Repairs to PVC shutter including fixing of new fittings etc after removal of damaged fittings supply of labour; tools etc complete.

Repairs to steel cupboard/showcase, storage cabinet shutters as directed including taking out the old damaged members and refixing the same after repairing the damaged member of approved quality, supply of all labour, tools, materials etc complete. (Payment will be made for the replaced member only)

Replacing the sunmica of cupboard/showcase/storage cabinets shutter and frames after removal of old damaged sun mica including supply of all labour, tools, materials etc complete.

Supply and fixing cupboards/showcase/storage cabinets fittings of approved quality after removing the damaged fittings and fixing the new one supply of all labour, materials, tools etc complete.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass 6mm to show case

iGlass knob for show case

Hasps and staple

Providing and fixing of fancy type door handle with lock with necessary screws etc. complete as per directions of Engineer-in-charge

Providing and fixing of fency type premium quality hinges for kitchen cabinet shutter etc all complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminum sheet 1.6 mm thick to door shutter including nails etc supply of all labour, materials, tools etc complete.

Providing and laying CC 1:2:4 door sill of size 2" x3" including plastering with CM 1:4 supply of all labour, tools, materials, shuttering, curing etc complete.

Repairs to wall/RCC cracks in cement mortar 1:3/CC 1:2:4 after cutting to V-grove, cleaning out, wetting and grouting with CM 1:3 including supply of all labour, tools, scaffolding materials etc.

Grinding and polishing of mosaic/terrazo floors and skirting first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing granite stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size and shape, laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing edge moulding to granite stone counters, Vanities, window sills, facia etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge for Granite Stone including cost of supply of all labour, materials, tools etc complete.etc at all levels

Regrading terracing of mud phuska covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phuska to proper slope relaying mud plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement; 3 sand) including supply of all labour, materials, tools etc complete.

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with SE paint of approved brand and manufacture as required on old work including supply of all labour, tools, materials etc complete.

50mm dia pipes

75mm dia pipes

100mm dia pipes

150mm dia pipes

Providing gola 75 x75 mm in cement concrete 1:2: 4 including finishing with cement mortar 1:3, including supply of all labour, tools, materials etc complete.

Repairs to the RCC chajja/sunshade with C.C. 1:2:4 after removal of broken concrete as directed, including necessary scaffolding all labour, tools & plants, curring etc complete.

Greasing the rolling shutter to make easy smooth movement of rolling shutter as directed including minor repair/welding etc supply of all labour, tools, materials etc complete.

Demolition of brick work in cement mortar carefully without damaging the adjacent one including stacking of serviceable materials and disposal of unserviceable material to the dumping ground, as directed, supply of all labour scaffolding, tools and plants etc complete.

Demolishing RCC work carefully without damaging the adjacent one including disposal of unserviceable materials to the dumping ground as directed, supply of all labour, scaffolding, tools and plants etc complete.

Brick work masonry with bricks of approved quality in super structure at all heights and wherever required in CM 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Half brick work masonry with bricks of approved quality in super structure at all heights and wherever required in C. M. 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Replacement of wood lipping of size 35x12mm in the existing door shutter including removing shutter for attending the work and re-fixing the same in position with brass screw wherever required. Supply of all labour, tools, materials etc. complete.

Removal and cleaning of debris accumulated over the RCC sunshade to maintaining the free flow of rainwater at all heights, including disposal of the same to the dumping ground as directed and supply of all labour, tools, scaffolding etc complete.

Renewal of rubber beading for glass of aluminum door/window / partition etc.including supply of all labour, materials, tools, scaffolding etc complete.

Refixing of storage cabinet including all necessary fittings including supply of all labour, materials, tools, scaffolding etc complete.

Providing and fixing M.S. grills of required pattern as per drawing at all heights, joints, mitred and welded with 15 x 3mm lugs, 10cm long embedded in C.C. block 15 x 10 x10 cm including cutting fabrication finishing etc applying a coat of metal primer all as directed and as per standard specifications, including cost of all materials, fittings welding, scaffolding labour, tools etc. complete.

Providing and fixing steel glazed windows and ventilators of standard rolled steel section as per existing pattern at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or welded to the existing steel frame at all heights including providing and fixing glass panes of 4mm thick with glazing clips and special metal glass putty of approved make including all fittings, fixtures, hinges/pivots etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.

Providing and fixing New G.I Mesh jali with Angle shutter in existing angle frames for doors/windows and ventilators of mild steel angle sections, M.S Flat,joints, mitred and welded and as required including fixing necessary butt hinges,aldrops,handles,locking arrangement system and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Providing/Laying of mosaic/terrazo floors and skirting after dismantling damage existing floor and skirting with grinding and polishing first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing New 50 mm dia m.s pipe with vertical square bar railing in verandah at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or including all fittings etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.( 0.90m height )

Supplying & placing TMT steel reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying R.C.C. 1:1½:3 (1Cement: 1½ River sand: 3 stone aggregate of 20 mm nominal size) for R.C.C. work of building upto floor all level(ground+3 Level ) including batching, mixing, laying, compacting ,cost of centering, shuttering, finishing to the exposed faces with10 mm thick plaster in C.M 1:3 (1Cement: 3 River sand) cost of supply of all materials, labours, tools & plants, curing & all other charges etc. complete..

Providing and laying in position cement concrete of grade 1:2:4 ( 1 cement : 2coarse sand zone-III : 4 graded stone aggregate 20mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level including supply of all labour, tools and plants, scaffolding curring etc. complete.

Providing and fixing in position Aluminium door with Powder coated aluminium sections of 63.50x38.10x 2.50 mm , 85 x 44.45 x 3.00 mm, Glazing Plate and snap Beading etc including providing aluminium composite panel, all required screws, nut bolt, fixure such as aluminum sliding doorbolt, door stoper etc including cost of all materials, labour, tools, scaffolding etc; complete as directed by Engineer incharge.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 25 mm thick

Premium acrylic smooth exterior paint with silicon additives of required shade, including double scaffolding system etc ( Two or more coats applied @1.43ltr/10 sqm over & including priming cotat of exterior primer applied @2.20 kg /10sqm ) at all hieghts to given and even shade etcm . wherever required including supply of all materials labours toolsall complete as per direction of engineer in charge.

Providing and placing in position 65 mm thick factory made machine batched & machine mixed Precast RCC perforated drain covers, RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering,inforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, including cleaning of drain and disposal of Malba,Providing CC bed 100mm thick of 250mm wide for resting of drain covers , making opening of drain etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing Chromium Plated brass curtraain rods of 25 mm duaneter & 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc, whenever necessary etc. including supply of all labous, material tools etc, completet as directed by the engineer in charge.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of four tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 125x38.10x1.74 mm Top and side track section 122x31.75x1.20mm. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 92x31.75x1.30 mm at weight 1.070kg./mtr.Top and side track section 92x31.75x1.30mm at weight 0.933kg/mtr. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Supply and fixing steel showcase of approved quality and shade fabricated of MS sheet of approved quality as per drawing using 18 gauge for shutters rack and bottom 22 gauge for sides top and back. Providing sliding glazed shutter with 5mm glass in the middle portion, providing handle, knobs hasp & staple etc. all of approved quality applying spray painting with two coats of synthetic enamel paint of approved quality over a coat of metal primer preparation of surface all as per standard specification, finishing the surface teak grain shade including removing the existing cupboards etc finishing with cement plastring after fixing new one as per existing patern or as per drawing & as directed cost of all materials , labour, tools etc. completed.( size of showcase size 80 cm x 210cmx33cm.=1.68 sqm.)

Providing and fixing factory made PVC door frame of size 50x47 mm with awall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 no.of 150mm long brackets of 15x15 mm M.S, square tube, the verticle door frame profiles to be reinforced with 19x19 mm M.S square tube of 19 gauge ,EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S screws of 65 / 100mm size , complete as per manufaturers specification and of Engineer-in charge. including all labour,materials & tools etc complete. ( Syntax make )

Providing and fixing 30mm thick factory made PVC door shutter made of styles and rails of UPVC profile section of size 30mmX60mm and wall th8ickness 2mm (.02mm tolrency) with inbuilt decorative moulding, adjoying on one side. The stryles and rails with plastic bracketes of size 75X20mm and welded at the corners. The sides of the shutters restricted by increasing galvized MS tube of size 25mmX20mm and 1mm (0.1mm tolrency) wall thickness. The lock rail made up of Hsection and UPVC profile section of size 30mmX100mm and 2mm (0.2mm tolrency) wall thickness welded to the shutter dstsyle with UPVC profile section. Single pannel of size not less than 620mm having overall thickness of 20mm and 1mm+0.1mm wall thickness with 20mm panell bearing of suitable sizze glasses ( 4mm thick plain glass) lower section, lower frame of suitable size as per manufacturer specification and direction of Engineer in charge.

Wall painting with premium Acrylic Emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture over and including a coat of water thinnable cement primer of approved brand and manufactur to give an even shade for preparing the surface properly & then cleaning the cdement painting spots on the floors, furnitures, doors & window etc. as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the even and smooth complete. As and whereever directed of approved quality and manufacture including, cost of all materials, labour, tools, scaffolding etc; complete

Providing and laying vetrified floor tiles of size 600mmx600mm size with water absorption less then 0.08% and conforming to IS 15622 of approved make ( Johnson /Kajaria /Nelco), in all colours and shades laid on 20mm. thick cement mortar 1:4(1cement,4coarse sand), including grouting the joints with white cement and matching pigments etc. In true line and level and joints filled with white cement and matching pigments, including supply of all labour, tools and plants, materials and finishing etc. complete as directed by the Engineer in charge.

Providing and fixing 6 mm thick glazed tiles 200mmx300mm of approved quality (design printed) and colour of approved size laid over 15 to 25 mm thick base C. M. 1:4 (1 cement, 4 coarse sand) and jointed with grey/white/matching colour cement slurry as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding curing etc. complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all materials, labours etc., complete as per direction of Engineer-in-charge at all floor four level

Scrape value for the following accessories after dismantling and making surface good.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass/ aluminum door closer

Scrape value for G.I. mesh with M.S. beading etc. complete.

Scrape value for damaged lock etc. complete.

Scrape value for flush door shutter, cupboard, shorage cabinet shutter etc. complete

Scrape value for damaged PVC shutter etc. complete

Scrape value for the following accessories.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass knob for show case

Hasps and staple

Scrape value for damaged M.S grills etc. complete for

Scrape value for damaged steel glazed windows and ventilators etc. complete

Scrape value for damaged m.s jali with angle shutter for door etc. complete

Scrape value for damaged 50mm pipe railling etc. complete

Scrape value for all type of false ceiling etc. complete

RATE FOR THIRD YEAR

Patch plastering with C.M 1:4 (1Cement, 4 medium sand) 15mm & 20mm thick to walls and ceiling as required and wherever directed at all heights including dismantling old loose/ damaged plaster and disposal of debris to dumping ground, curing, scaffolding, supply of all labour, tools and materials etc complete.

White/colour washing on ceiling and wall surfaces two coats to give an even surface at all heights after thoroughly removing all loose scales and other foreign matter, cleaning and brooming the surface of all dirt, filling the pot holes etc., and cleaning the droplets after white washing all as directed, cost of all materials, labour, tools, scaffolding etc; complete.

Painting two coats on steel/wood work on previously painted doors, windows, ventilators, M.S. Grills and Grill doors at all heights with synthetic enamel paint of approved first quality and colour to (Shalimar - super lac, Berger - Luxol, Asian - Apcolite, J & N - Robbiclac) give an even shade after thoroughly cleaning the surface of all dirt, dust, loose scales, grease, other foreign matter etc; with wire brush/ emery paper/scrappers etc, preparation of surface including applying putty and primer wherever required all as directed, including cost of all materials, labour, tools, scaffolding etc; complete

Doors, windows, ventilators

M.S. Grills & Grill doors

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface, after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Finishing walls with water proofing cement paint of approved 1st quality, brand and shade (Asian, Snowcem, Berger) two coats at all heights, to give an even shade after thoroughly brushing the surface with sand paper, wire brushes/ scrappers to remove all dirts, spots, loose pieces of scales/softened paint, cleaning with fresh water, preparation of surface including filling the pot holes with putty, applying touching up with WPC paint on new patch plastered surface, cleaning the droplets all as directed, including the cost of all materials, scaffolding, curing, labour, tools etc. complete.

Wall painting two coats with plastic emulsion paint of approved 1st quality and brand (Asian, Berger, J&N) and colour on previously painted wall surface at all heights to give an even shade at all heights after thoroughly brushing the surface with sand paper, cleaning all dirt, grease, loose pieces of scales and preparations of surface including filling the pot holes, applying putty wherever required cleaning the droplets all as directed including the cost of all materials, scaffolding, labour, tools etc. complete.

Distempering two or more coats with oil bound distemper of approve 1st quality, brand and shade (Asian, Berger, J&N) at all heights to give an even shade after thoroughly brushing the surface with sand paper/scraping, cleaning all dirt, loose scale, preparation of the surface/including filling pot holes applying putty etc. where ever required, supply of all materials, scaffolding, labour, tools etc. complete.

Repairs to cracked portion of RCC chajja, roof slab projection in C.C. 1:2:3 (1cement, 2 coarse sand and 3 graded stone aggregate of 20 mm down size) including dismantling the cracked portion, removing loose cement concrete, cleaning scaffolding, curing, supply of all labour, materials, tools etc complete.

Petty repairs to damaged door, window, ventilator shutter as directed including taking out the old damaged member and refixing the same after repairing the damaged member with wood of approved quality, supply of all labour, materials, tools etc complete

Supply and fixing oxidized M.S. door, window fittings of approved quality after removing the damaged fittings and refixing the new one supply of all labour, materials, tools and necessary welding etc complete.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass door closer

Aluminum door closer

Polishing with French polish on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth supply of all labour, materials, tools etc complete.

Renewal the existing, door, window, ventilator glass putty including taking out loose putty, nails etc at all heights, providing new putty supply of materials, tools, labour etc complete.

Replacing the broken/damaged glass panes with new glass panes (Plane /Frosted) with nails, putty at all height including removing the broken glass panes, supply of all labour, materials, tools etc complete.

3mm thick

4mm thick

6 mm thick

Providing and fixing G.I. mesh (85 G) to doors and windows shutters, after removing old damaged/broken G.I. mesh, with M.S. beading of size 15mm x 4mm and fixing screws including fabrication, welding, grinding etc, painting with two coats of S.E. paint of approved quality over a coat of primer, preparation of surface as directed including supply of all labour, tools, materials etc complete.

Providing and fixing lock of approved quality to grill door after removing old/damaged lock including supply of all labour, tools, materials, welding etc complete.

Applying wax polish on previously polished wooden doors, windows to give an even shade including cleaning the surface of all dirt, dust and sand prepared smooth including cost of all materials, labour, tools etc completc.

Providing and fixing moulded beading of 2nd class teak to doors and windows frames as directed with fixing screws, glue etc polishing making good any damage while working, including cost of all materials, labour, tools etc complete.

50mm x 12mm

25mm x 12mm

Cutting grass, ranking into heaps, removing off the premises and uprooting of rank vegetation grass, brush wood and removing the debris from the sunshades etc including supply of all labour, tools etc complete.

Providing and fixing aluminum step edging 'L' shape of size 38mm x 12mm x 3mm thick to stairs including cutting RCC/ Brick steps for fixing aluminum step edging and make good to match the surroundings including supply of all labour, tools, materials etc complete.

Providing and fixing Angle frames for doors/windows and ventilators of mild steel angle sections, joints, mitred and welded with 15 x 3mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x10 cm of 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm nominal size) or with wooden plugs and screws or plug and screws or with fixing clips or with bolt and nuts as required including fixing necessary butt hinges and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Replacement of broken / damaged doors shutter with ready made flush door shutter 40mm thick of approved quality including all fittings, locking arrangements, welding hinges to angle iron frame including painting cost of all materials, tools, labour etc complete.

Minor repairs to doors, windows and ventilators shutters, frames etc including supply of all labour, tools etc complete. (Which will not require welding machine)

Repairs to existing doors and windows with electrical welding including removal of doors and windows frames and same to be fixed in same position after repairing as directed making good the walls etc, supply of all labour, tools, welding machine etc. complete.

Repairs to PVC shutter including fixing of new fittings etc after removal of damaged fittings supply of labour; tools etc complete.

Repairs to steel cupboard/showcase, storage cabinet shutters as directed including taking out the old damaged members and refixing the same after repairing the damaged member of approved quality, supply of all labour, tools, materials etc complete. (Payment will be made for the replaced member only)

Replacing the sunmica of cupboard/showcase/storage cabinets shutter and frames after removal of old damaged sun mica including supply of all labour, tools, materials etc complete.

Supply and fixing cupboards/showcase/storage cabinets fittings of approved quality after removing the damaged fittings and fixing the new one supply of all labour, materials, tools etc complete.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass 6mm to show case

iGlass knob for show case

Hasps and staple

Providing and fixing of fancy type door handle with lock with necessary screws etc. complete as per directions of Engineer-in-charge

Providing and fixing of fency type premium quality hinges for kitchen cabinet shutter etc all complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminum sheet 1.6 mm thick to door shutter including nails etc supply of all labour, materials, tools etc complete.

Providing and laying CC 1:2:4 door sill of size 2" x3" including plastering with CM 1:4 supply of all labour, tools, materials, shuttering, curing etc complete.

Repairs to wall/RCC cracks in cement mortar 1:3/CC 1:2:4 after cutting to V-grove, cleaning out, wetting and grouting with CM 1:3 including supply of all labour, tools, scaffolding materials etc.

Grinding and polishing of mosaic/terrazo floors and skirting first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing granite stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size and shape, laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing edge moulding to granite stone counters, Vanities, window sills, facia etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge for Granite Stone including cost of supply of all labour, materials, tools etc complete.etc at all levels

Regrading terracing of mud phuska covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phuska to proper slope relaying mud plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement; 3 sand) including supply of all labour, materials, tools etc complete.

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with SE paint of approved brand and manufacture as required on old work including supply of all labour, tools, materials etc complete.

50mm dia pipes

75mm dia pipes

100mm dia pipes

150mm dia pipes

Providing gola 75 x75 mm in cement concrete 1:2: 4 including finishing with cement mortar 1:3, including supply of all labour, tools, materials etc complete.

Repairs to the RCC chajja/sunshade with C.C. 1:2:4 after removal of broken concrete as directed, including necessary scaffolding all labour, tools & plants, curring etc complete.

Greasing the rolling shutter to make easy smooth movement of rolling shutter as directed including minor repair/welding etc supply of all labour, tools, materials etc complete.

Demolition of brick work in cement mortar carefully without damaging the adjacent one including stacking of serviceable materials and disposal of unserviceable material to the dumping ground, as directed, supply of all labour scaffolding, tools and plants etc complete.

Demolishing RCC work carefully without damaging the adjacent one including disposal of unserviceable materials to the dumping ground as directed, supply of all labour, scaffolding, tools and plants etc complete.

Brick work masonry with bricks of approved quality in super structure at all heights and wherever required in CM 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Half brick work masonry with bricks of approved quality in super structure at all heights and wherever required in C. M. 1:4 (1 Cement and 4 coarse sand) as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding, curing etc complete.

Replacement of wood lipping of size 35x12mm in the existing door shutter including removing shutter for attending the work and re-fixing the same in position with brass screw wherever required. Supply of all labour, tools, materials etc. complete.

Removal and cleaning of debris accumulated over the RCC sunshade to maintaining the free flow of rainwater at all heights, including disposal of the same to the dumping ground as directed and supply of all labour, tools, scaffolding etc complete.

Renewal of rubber beading for glass of aluminum door/window / partition etc.including supply of all labour, materials, tools, scaffolding etc complete.

Refixing of storage cabinet including all necessary fittings including supply of all labour, materials, tools, scaffolding etc complete.

Providing and fixing M.S. grills of required pattern as per drawing at all heights, joints, mitred and welded with 15 x 3mm lugs, 10cm long embedded in C.C. block 15 x 10 x10 cm including cutting fabrication finishing etc applying a coat of metal primer all as directed and as per standard specifications, including cost of all materials, fittings welding, scaffolding labour, tools etc. complete.

Providing and fixing steel glazed windows and ventilators of standard rolled steel section as per existing pattern at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or welded to the existing steel frame at all heights including providing and fixing glass panes of 4mm thick with glazing clips and special metal glass putty of approved make including all fittings, fixtures, hinges/pivots etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.

Providing and fixing New G.I Mesh jali with Angle shutter in existing angle frames for doors/windows and ventilators of mild steel angle sections, M.S Flat,joints, mitred and welded and as required including fixing necessary butt hinges,aldrops,handles,locking arrangement system and screws and applying two coats of synthetic enamel paint over a coat of metal primer of approved quality including supply of labour, tools, materials etc complete. (Size 2.10 x 1.00)

Providing/Laying of mosaic/terrazo floors and skirting after dismantling damage existing floor and skirting with grinding and polishing first grinding shall be with carborandum stone of 60 to 80 grade grit, second grinding shall be with 120 grade grit and the final grinding shall be with grit of 220 to 350, rubbing uniformly including grouting with cement, filling pin holes mixing pigment to match the colour of the floor curing etc all as directed including cleaning, washing with oxalic acid powder/wax polishing to have glossy surface all as directed, cost of all labour, materials, tools and machinery etc. including making good damaged caused to walls plastering etc complete.

Flooring

Skirting

Providing and fixing New 50 mm dia m.s pipe with vertical square bar railing in verandah at all heights as per drawing, joints, mitred and welded with 15 x 3 mm lugs 10 cm long embedded in CC block 15 x 10 x 10 cm of 1:3:6 or including all fittings etc applying two coats of synthetic enarmel paint of approved quality and colour over a coat of metal primer all as directed, cost of all materials, fittings, welding scaffolding, labour, tools etc complete.( 0.90m height )

Supplying & placing TMT steel reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying R.C.C. 1:1½:3 (1Cement: 1½ River sand: 3 stone aggregate of 20 mm nominal size) for R.C.C. work of building upto floor all level(ground+3 Level ) including batching, mixing, laying, compacting ,cost of centering, shuttering, finishing to the exposed faces with10 mm thick plaster in C.M 1:3 (1Cement: 3 River sand) cost of supply of all materials, labours, tools & plants, curing & all other charges etc. complete..

Providing and laying in position cement concrete of grade 1:2:4 ( 1 cement : 2coarse sand zone-III : 4 graded stone aggregate 20mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level including supply of all labour, tools and plants, scaffolding curring etc. complete.

Providing and fixing in position Aluminium door with Powder coated aluminium sections of 63.50x38.10x 2.50 mm , 85 x 44.45 x 3.00 mm, Glazing Plate and snap Beading etc including providing aluminium composite panel, all required screws, nut bolt, fixure such as aluminum sliding doorbolt, door stoper etc including cost of all materials, labour, tools, scaffolding etc; complete as directed by Engineer incharge.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 25 mm thick

Premium acrylic smooth exterior paint with silicon additives of required shade, including double scaffolding system etc ( Two or more coats applied @1.43ltr/10 sqm over & including priming cotat of exterior primer applied @2.20 kg /10sqm ) at all hieghts to given and even shade etcm . wherever required including supply of all materials labours toolsall complete as per direction of engineer in charge.

Providing and placing in position 65 mm thick factory made machine batched & machine mixed Precast RCC perforated drain covers, RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering,inforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, including cleaning of drain and disposal of Malba,Providing CC bed 100mm thick of 250mm wide for resting of drain covers , making opening of drain etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing Chromium Plated brass curtraain rods of 25 mm duaneter & 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc, whenever necessary etc. including supply of all labous, material tools etc, completet as directed by the engineer in charge.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of four tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 125x38.10x1.74 mm Top and side track section 122x31.75x1.20mm. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 millimetre at weight 0.637 kg/mtr.with window frame bottom track section 92x31.75x1.30 mm at weight 1.070kg./mtr.Top and side track section 92x31.75x1.30mm at weight 0.933kg/mtr. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. inter locking section 40x18x1.10mm at weight 0.469kg/mtr.and handle and top section 40x18x1.25 mm at weight 0.417kg/mtr. as per detailed drawing and as directed by Engineer incharge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted verticle section of shutter including 5 mm thick high performance single glaze unit (SUG)-glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete. With colour anodising with box. including cost of all materials, labour, tools, scaffolding etc; complete

Supply and fixing steel showcase of approved quality and shade fabricated of MS sheet of approved quality as per drawing using 18 gauge for shutters rack and bottom 22 gauge for sides top and back. Providing sliding glazed shutter with 5mm glass in the middle portion, providing handle, knobs hasp & staple etc. all of approved quality applying spray painting with two coats of synthetic enamel paint of approved quality over a coat of metal primer preparation of surface all as per standard specification, finishing the surface teak grain shade including removing the existing cupboards etc finishing with cement plastring after fixing new one as per existing patern or as per drawing & as directed cost of all materials , labour, tools etc. completed.( size of showcase size 80 cm x 210cmx33cm.=1.68 sqm.)

Providing and fixing factory made PVC door frame of size 50x47 mm with awall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 no.of 150mm long brackets of 15x15 mm M.S, square tube, the verticle door frame profiles to be reinforced with 19x19 mm M.S square tube of 19 gauge ,EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S screws of 65 / 100mm size , complete as per manufaturers specification and of Engineer-in charge. including all labour,materials & tools etc complete. ( Syntax make )

Providing and fixing 30mm thick factory made PVC door shutter made of styles and rails of UPVC profile section of size 30mmX60mm and wall th8ickness 2mm (.02mm tolrency) with inbuilt decorative moulding, adjoying on one side. The stryles and rails with plastic bracketes of size 75X20mm and welded at the corners. The sides of the shutters restricted by increasing galvized MS tube of size 25mmX20mm and 1mm (0.1mm tolrency) wall thickness. The lock rail made up of Hsection and UPVC profile section of size 30mmX100mm and 2mm (0.2mm tolrency) wall thickness welded to the shutter dstsyle with UPVC profile section. Single pannel of size not less than 620mm having overall thickness of 20mm and 1mm+0.1mm wall thickness with 20mm panell bearing of suitable sizze glasses ( 4mm thick plain glass) lower section, lower frame of suitable size as per manufacturer specification and direction of Engineer in charge.

Wall painting with premium Acrylic Emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture over and including a coat of water thinnable cement primer of approved brand and manufactur to give an even shade for preparing the surface properly & then cleaning the cdement painting spots on the floors, furnitures, doors & window etc. as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the even and smooth complete. As and whereever directed of approved quality and manufacture including, cost of all materials, labour, tools, scaffolding etc; complete

Providing and laying vetrified floor tiles of size 600mmx600mm size with water absorption less then 0.08% and conforming to IS 15622 of approved make ( Johnson /Kajaria /Nelco), in all colours and shades laid on 20mm. thick cement mortar 1:4(1cement,4coarse sand), including grouting the joints with white cement and matching pigments etc. In true line and level and joints filled with white cement and matching pigments, including supply of all labour, tools and plants, materials and finishing etc. complete as directed by the Engineer in charge.

Providing and fixing 6 mm thick glazed tiles 200mmx300mm of approved quality (design printed) and colour of approved size laid over 15 to 25 mm thick base C. M. 1:4 (1 cement, 4 coarse sand) and jointed with grey/white/matching colour cement slurry as per standard specifications and as directed including supply of all labour, materials, tools, scaffolding curing etc. complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all materials, labours etc., complete as per direction of Engineer-in-charge at all floor four level

Scrape value for the following accessories after dismantling and making surface good.

250mm tower bolt 10mm dia

150mm tower bolt 10mm dia

300mm x 16mm Aldrop (heavy type)

Window stopper

100mm butt hinges (heavy type)

75mm butt hinges (heavy type)

Door Rubber stopper.

100mm D Handles

Brass/ aluminum door closer

Scrape value for G.I. mesh with M.S. beading etc. complete.

Scrape value for damaged lock etc. complete.

Scrape value for flush door shutter, cupboard, shorage cabinet shutter etc. complete

Scrape value for damaged PVC shutter etc. complete

Scrape value for the following accessories.

Steel hinges ½" by ¾"

D Handles brass

Brass knobs

Anodized aluminums tower bolt 6"

Godrej lock

Magnetic type stopper

Ordinary stopper

Glass knob for show case

Hasps and staple

Scrape value for damaged M.S grills etc. complete for

Scrape value for damaged steel glazed windows and ventilators etc. complete

Scrape value for damaged m.s jali with angle shutter for door etc. complete

Scrape value for damaged 50mm pipe railling etc. complete

Scrap value for all type of false ceiling etc. Complete

shahin enterprises

M/S DEEP CONSTRUCTION

M/S MS UMESH KUMAR