COMPREHENSIVE MAINTENANCE INCLUDING REPAIRS TO JOINERY WALL FLOORING AND PERIODICAL SERVICES INCLUDING INTERNAL WIRING REPAIRS AND CLEANING OF SEPTIC TANK SOAKAGE WELL SEWAGE LINES MAN HOLES REPAIRS FENCING COMPOUND WALL ETC AT COIMBATORE AND MADUKKR

Amount

Hacking out old broken glass (any thickness, size, quality or description) from wooden/matel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

Plain sheet glass 4 mm thick, ordinary quality and glazing with oil putty/ wooden beading in squares not exceeding 0.50 sqm in each pane all as specified and directed.

Figured glass, pin headed type 4mm thick, and glazing with oil putty/ wooden beading in squares not exceeding 0.5 sq. m in each pane all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs complete all as specified and directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

PVC Valveless,syphonic action type flushing cistern,low level 10 litres capacity white with inlet ball valve float and handle including flush pipe of polyethylene of low or high density all as speciied and directed.

Stainless steel sinks with drainage board 1mm thick kitchen or laboratory with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs all as specified and as directed.

Stainless steel sinks 1mm thick kitchen or laboratory with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm, bowl size 410 x 330 x 160mm, fixed to repairs all as specified and directed.

Chromium plated shower rose with or without swivel joint, 125mm size, including fixing to steel pipe or union, fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs all as specified and directed.

Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and directed.

Dismantling PVC water tank exceeding 500 ltrs and not exceeding 1000 Ltr capacity from existing position all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layered of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layered of capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

15mm dia bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe including fixed in repairs all as specified and directed.

Stop/ angle valves, 15mm dia,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

Stop/ angle valves, 15mm dia,fancy type chromium plated cast copper alloy, with long shank and cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

Expandable type PTMT/ LDPE 32mm dia waste pipe for wash hand basin / kitchen sink complete including fixed in repairs all as specified and directed.

25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

PVC connection 15mm size with PTMT length 600mm all as specified and as directed.

Stainless steel plate rack of approved make and design all as directed, size not less than 800 x 900mm weight not less than 6.5kg including fixed in repairs all as specified and as directed.

Stainless steel / Harrison rails chromium plated with fixing brackets, stops, rollers etc. curtain rod complete including fixed in repairs all as specified and directed.

Tubular towel rail 20mm dia, D type, 60cm long between flanges brass chromium plated fancy type with brackets including fixed in repairs all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 15 mm complete all as specified and directed.

15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 20 mm complete all as specified and directed.

20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supplying and laying of 16 mm bore CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Taking down PVC / wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down PVC / wooden chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

Taking down Shutter of any description not exceeding 1 sqm each all as specified and directed.

Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc, complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate etc , complete all as specified size of 105x60mm all as specified and directed.

30mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. Note: Glazing and gauze will be measured and paid separately.

Second class HW plain, framed, panelled shutters 30mm thick (any No of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel pegs stay complete with glazing bars dovetailed or welded with glazing bars all as shown on drg complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded as fly proof shutters complete all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Providing plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame all as specified and directed.

PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 125 mm size complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and directed.

Extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed.

300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed.

Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long including fixed in repairs complete all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Ground or obscured or frosted sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed.

Plain sheet glass 4mm thick ordinary quality and glazing with oil putty and beads in square exceeding 0.5 sqm in each pane all as specified and as directed

Solar control film 25micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work including fixed in repairs all as specified and directed.

18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work as in including fixed in repairs complete all as specified and directed.

Aluminium door shutters including powder coated, aluminium section weighing not less than 0.55Kg/mtr including necessary joining cleats, glazing cleaps, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screw, etc complete all as specified and directed. Note: Glass, wiremesh and particle board shall be measured and paid separately.

Aluminium window and ventilator shutters including Powder coated, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminum snap beading screws etc. complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed.

Sheet glass, 4.8mm thick ordinary quality and glazing with oil putty/ rubber beading in square but exceeding 0.5 sq. m in each pane all as specified and directed.

Door closer aluminium (extruded section) body hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed.

Double action floor spring hydraulically regulated made up of minium 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made up of mild steel heavy duty and fixed in repairs all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Demolition of stone slabs and granite/ tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

Sunken treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of industrial bitumen primer @ 1.2 kg/ sqm including cleaning surfaces. (ii) supply & Laying APP based polymeric membrane miniumum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specifed and as directed.

Roof treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of bitumen primer @ 1.2 kg/ sqm. (ii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/front fascia. (iii) Cleaning & preparing the surfaces and finally painted at the top with a coat of bituminous aluminium paint all as specified and as directed

Demolition of Concrete such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work compelte all as specified and as directed.

10mm thick cement plaster in cm (1:4) on top of roof slab/ sunken floor with WPC all as specified and as directed.

Supply only liquid water proofing compound all as specified and directed.

PCC 1:4:8 Type D2 40mm aggreagate as in sunken floor, foundations filling and mass concrete etc complete all as specified and directed.

25mm thick cement concrete type B1 1:2:4 20mm stone aggregate as in sub floor, sub bases, floors, roof and pavings etc complete all as specified.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450mm x 350 x 7mm / 350mm x 250mm x 7mm to 8mm thick as in dados, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface, on including 10mm thick rendering in cement mortar 1:3 for fixing dado tiles complete all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

All as per above item 81 hereinbefore, but on vertical surfaces including 10mm thick cement mortar 1:3 as in baking coat of dado/ skirting all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

All as per above item 83 hereinbefore, but on vertical surfaces including 10mm thick cement mortar 1:3 as in backing coat of dado/ skirting all as specified and as directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms and like in cement mortar 1:4, 20mm thick screed including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite all as specified and as directed.

20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Machine kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20mm thick cement screed in cement mortar 1:4 all as directed complete all as specified and as directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick cement mortar 1:3 as in baking coat of dado/ skirting complete all as specified and as directed.

Supplay and fix in repair china urinal partition white of size 310 x 710 mm all as specified and as directed.

Brass chromium plated bottle trap 32 mm for wash basins with inlet and outlet screwd for pipe or connections incl necessary packing, union and cap and fixed in repairs all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) and fixed in repairs all as specified and directed.

Vitreous China urinal, half stall type complete including waste pipe 32mm dia flush pipe 32mm dia & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed complete and fixed in repairs all as specified and as directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms, complete and fixed in repairs all as specified and directed.

20 mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete as as specified and as directed.

PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement including concrete pedestal etc complete all as specified and directed.

110mm bore,PVC (SWR) Tee any radius, fitted with oval access door all as specified and directed.

PVC (SWR) bends any radius, 110mm bore all as specified and directed.

PVC (SWR) bends any radius, 110mm bore with access door all as specified and directed.

PVC (SWR) vent cowl 110mm dia bore of pipe complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches, drain, walls or in floors complete all as specified and directed.

PVC (SWR) pipes 75mm dia single socketed, in any length, laid in trenches, walls or in floors complete all as specified and directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with fly ash bricks, built in straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Brickwork with fly ash bricks,, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

75 mm thick PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in plinth protection laid and finished in bays not exceeding 2 sqm in paln and filling the joints with mastic bitumen complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Rolled mild steel work in purlins, rafters, roof truss etc incl cleats/distance pieces etc complete, conforming to Fe-410 W (Gde-E-250) Quality A all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.

Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions all as specified and as directed.

Providing & fixing fully peforated 12mm thick micro tegular edged false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions

Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Anodised aluminium snap grid 605mmX605mm frame work for false ceiling all as specified and as directed.

Providing and fixing 12mm thick particle board in metal /Al frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed.

Providing and fixing 12mm thick perforated particle board /tiles for insulaiton and acoustic purpose 60cm x 60cm in size fixed in metal /Al frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed.

MS, plain, black sheet 1.00mm thick In wall cladding, steel gates and similar work,cut to size, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles,etc as required welded to frame, including fixed in repairs all as specified and as directed.

Taking down existing drain/ soil/ waste/ vent pipes of any description and in any position of any size all as specified and as directed.

Welding in repairs not exceeding 2.5cm in length & thickness not exceeding 6mm complete on windows/ shutters hinges etc including making shutters functionable as directed.

Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and pillasters and applying one coat of white washing complete all as specified and directed.

Preparation of old decorated ceiling surfaces (plastered or unplastered) including cornices and pillasters and applying one coat of white washing complete all as specified and directed.

Preparation of old treated surface of wall and applying one coat of cement base paint on wall surfaces complete all as specified and directed .

Applying one coat of wall care putty to cover old uneven plastered surfaces in wall/ceiling upto 3mm thick in two coats to cover undulations and finished even and smooth using emery paper all as directed.

Applying one coat of oil bound distemper on old deorated plastered surfaces of walls including preparation of surfcaes and filling holes and undulations with wall putty all as specified and directed.

Taking down cement or cement lime plaster on brick/ stone walls including racking out joints hacking for key scrubbing down with water etc all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick in cement mortar 1:4 with WPC over a coat of 10mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid seperately.

Rendering to ceiling 5mm thick in cement mortar 1:3 on fair face of concrete surfaces finished even and smooth without using extra cement complete all as specified.

Preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.

Preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed.

Applying three coats of whitewash in ceiling on newly palstered surfaces including preparation all as specified and directed.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper on old plastered surface over a coat of primer complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of cement base paint on old plastered surface over a coat of primer complete all as specified and directed.

Preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old steel surfaces not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Cleaning the existing SGSW/ CI /PVC (SWR) sewage Pipe line of any dia by mechanical means by rodding, jetting and removing all sludge and foreign matters completely and neatly from the pipe line under foul condition (including lines and manholes under blocked/ choked condition) and making the sewage lines serviceable for free flow of sewage including blocking of higher level manholes, washing with fresh water to the cleaned line by means of hydraulic/ pneumatic/ vacuum water jet etc all as specified and directed. These operation shall be carried out strictly in conformity with the provisions of 'Manual scavenging (Prohibition) Act and by following all mandatory safety provisions.

Cleaning of manholes of any size and depth up to 2.00 mtrs under foul condition, by removing MH covers, removing of accumulated liquid, sludge/ sediments by mechanical means, transporting the fluid/ sludge etc in covered containers by mechanical means and disposing of the same in CPCB approved central STP/ ETP facility. Cleaning of the manholes with fresh water and white washing inside MH, including petty repairs of cement mortar/ cement concrete (type B-1 1:2:4 using 20 mm graded aggregate and) patch work on holes if any made by rodents and making good to walls, placing the MH covers back intact in position and setting in cement mortar 1:6 all as specified and directed.

Cleaning and removing individual blockages in IWC/ EWC mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed.

All as per Item No. 143 hereinbefore, but for Gully trap / nahani trap / floor trap etc including opening the gratings and replacing the covers / gratings in position and making good complete all as specified and directed.

Cleaning of septic tank / sewage sump / soak well by removing of sludge and sediments in dry or mud state by machanical means, transporting the fluids / sludge etc in covered containers machanically and burying the same in pits where directed including necessary excavation, refill and disposal of surplus soil etc, complete, cleaning of septic tank with water, placing the covers intact and removing bush / vegatation near by septic tank to and extent of 3M all round and removing of sewage water from septic tank/ sewage sump/ soak well through septic tank cleaning lorries having pumping arrangement and carrying the sewage water in tanks of lorry having 5000 liters capacity and disposal of the sewage water 15Km away from outside defence area in the places upproved by local municipality / corporation complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 75mm / 100mm including under and haunching of cement concrete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 150mm including under and haunching of cement concrete all as specified and directed.

160mm (outer dia) PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or in walls all as specified and directed.

PVC (SWR) bends any radius, 75mm bore all as specified and directed.

PVC (SWR) bends any radius, 75mm bore with access door all as specified and directed.

75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

Concrete bed to 150mm bore drain pipes in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.

Concrete bed to 100mm bore drain pipes in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, layer complete all as specified and directed

Removing of excavated soil/ material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of reinforced cement concrete cover slab of manhole all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:4 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed.

rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even and smooth with out using extra cement complete aall as specified and directed.

Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in forming channel benching inside manhole (1/2 or 3/4 section) smooth finished and benching as required for 150mm dia drain in manholes all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab of manholes set in cement mortar (1:4) including necessary formwork all as shown on drawing all as specified and directed. Note: Reinforcement shall be measured and paid separately

Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggrgate as in surface channels and drains all as specified and directed.

Cement concrete 1:3:6 type C1 using 20mm graded stone aggrgate as in coping including necessary form work all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and finished even and fair complete all as specified and directed.

Chequerred cement concrete tiles with grey cement and pigment of size 200x200mm x 25mm thick set, jointed and pointed in neat cement slurry incl 20mm thick in CM 1:4 bedding layer of mortar all as specified and directed.

Mild steel TMT bars 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Mild steel bolt 75mm long 10mm dia with hexgonal or square head one end and screwed the sother or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut all as specified and directed.

Dismantling of (steel, wood, or RCC) posts or struts embedded in ground, any section incl taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Rough excavation/ cleaning of weeds, mud, sand, etc from storm water drain including, excavating of rubbish off from site in poul position, complete all as specified and as directed.

Excavating in post holes (or similar holes) each in hard/ dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed

Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in post hole foundations all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Material and labour for 900mm dia and 1.5m depth precast soakage well including transportation, excavation, returning filling/ removal of surplus soil and fixing etc., complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. tank of capacity exc 250 ltr and N.exc 500Ltr complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. tank of capacity exceeding 500 ltr and not exceeding 1000Ltr complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. tank of capacity exceeding 1000 ltr and not exceeding 2000Ltr complete all as specified and directed

Taking down old / unserviceable / damaged point wiring carefully of any type (i.e on wooden batten, surface conduit, casing and capping or concealed conduit) complete for light fan socket or power point with fittings and fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc., including accessories such as wooden gutties/ rewal plug, screw etc including making good disturbed surface to match the existing surface all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly One light/ fan/ Exhaust fan / call bell point controlled by one switch 5 Amp one way completed all as specified and directed

All as per item No 185 hereinbefore but socket outlet 3 pin 5 amps same board all as specified and directed.

All as per item No 185 hereinbefore but socket outlet 3 pin 5 amps independent board all as specified and directed.

All as per item No 185 hereinbefore but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5Sqmm copper conductor wire FRLS PVC insultated using as earth wire complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, non metallic PVC conduit and accessories on wall/roof/floor etc, ISI marked suitable for surface conduit wiring with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly One light/ fan/ Exhaust fan point controlled by one switch 5 Amp one way completed all as specified and directed

All as per item No 189 hereinbefore but socket outlet 3 pin 5 amps same board all as specified and directed.

All as per item No 189 hereinbefore but socket outlet 3 pin 5 amps independent board all as specified and directed.

All as per item No 189 hereinbefore but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5Sqmm copper conductor wire FRLS PVC insultated using as earth wire complete all as specified and directed.

Switch Piano flush button single pole one way 5 Amp 240V, 50Hz AC, ISI marked complete all as specified and directed

Supply and Fix switch piano type single pole one way 15 Amp 240V, 50Hz AC, ISI marked all as specified and directed.

Supply and Fix Socket outlet multi purpose 2 in 1, 3 pin 5 Amp 230V, 50Hz AC, ISI marked all as specified and directed.

Supply and Fix sockets outlet multi purpose 2 in 1, 3 Pin, 5 Amp and 15 Amp flush type 230V, 50Hz AC, ISI marked all as specified and directed

Lamp holder PVC/ Polycarbonate type with back plate suitable for angular fitting all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specified and directed.

Ceiling rose, two or three terminals PVC / polycarbonate, isolated body all as specified and directed

MCB's with DB's 12 way sheet metal encloser single pole and netural 230volt with 200 Amps rated bus bar and double door type all as specified and directed.

MCB's with DB's 8 way sheet metal encloser single pole and netural 230volt with 200 Amps rated bus bar and double door type all as specified and directed.

MCB's with DB's 4 way sheet metal encloser single pole and netural 230volt with 200 Amps rated bus bar and double door type all as specified and directed.

MCBs with DB's sheet metal enclosures TPN 4 way 415 Volt with 200 Amps rated bus bar and Double Door Type following type/cap complete all as specified and directed

MCB's single pole 5 Amps to 40 Amps, 240 Volts all as specified and directed.

MCB SPN 240 volts of capacity 6-40 Amps complete all as specified and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 1x 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifie and directed. Make: Halonix - HLB-07-10-CW-IP or equivalent in Philips / CG / Havells

LED light fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifie and directed. Make: Halonix - HLB-07-20-CW-IP or equivalent in Philips / CG / Havells

Lamp holder PVC/ Polycarbonate type with cord grip suitable for pendant fitting all as specified and directed.

Supply and fix in repair replacement fan regulator stepped electronic fan regulator flush type (socket type) suitable for celing fan 240V AC 50 Hz ISI marked all as specified and directed

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level, top edge of the plate not less then 1.5M below nominal ground level connected to galvanised earth lead wire 4mm dia by means of bolts and cheek nut and washer of galvanised iron incl GI protection pipe and watering pipe all as shown in electrical plate No 3 of SSR Pt I including connection with main switch board all as specified including taking out old u/s earthing from existing location all as specified and directed.

Wiring for circuit / sub main wiring using FR PVC insulated copper conductor cable of size 2 x 6mm² along with 1 x 4mm² single core cable for earth continuity to be drawn in non metallic PVC conduit in surface / recessed all as specified and directed. Note: Two runs of PVC insulated cable with one run of earth wire and one run of conduit including accessories shall be measured as one length.

Taking out unserviceable switch in lieu of supply and fix switch piano type single pole one way 5 Amp 240V, 50Hz AC, ISI marked all as specified and directed.

Taking out unserviceable switch in lieu of supply and fix switch piano type single pole one way 15 Amp 240V, 50Hz AC, ISI marked all as specified and directed.

Taking out unserviceable socket in lieu of supply and fix sockets outlet multi purpose 2 in 1, 3 Pin, 5 Amp 230V, 50Hz AC, ISI marked all as specified and directed.

Taking out unserviceable socket in lieu of supply and fix sockets outlet ( Multi purpose) 2 in 1, 3 Pin, 5 amps and 15 Amp flush type 230V, 50Hz AC, ISI marked all as specified and directed.

Taking out unserviceable fan regulator in lieu of supply and fix fan regulator stepped electronic fan regulator flush type (switch type) suitable for celing fan 240V AC 50 Hz ISI marked all as specifiedd and directed.

Supply and replacement of switch socket combination multi purpose 2 in 1, 3 Pin, 5 Amp 230V, 50Hz AC, ISI marked all as specified and directed by all as specifiedd and directed.

supply and replacement of switch socket combination ( Multi purpose) 2 in 1, 3 Pin, 5 amps and 15 Amp flush type 230V, 50Hz AC, ISI marked all as specified and directed.

Supply and fixing LED Buliding security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Halonix - HLSLD-E1-36-CWDL-R01 or equivalent in CG / Havells / Surya

Re-winding the stator complete with super enameled copper conductor with the same size the number of turns as that the old one insulating, varnishing and pre heating and painting for Ceiling fan 1200mm/1400mm sweep any model all as specified and directed.

Re-winding the stator complete with super enameled copper conductor with the same size the number of turns as that the old one insulating, varnishing and pre heating and painting for Exhaust fan up to 300mm sweep any model all as specified and directed.

Supply only replacement ceiling fan condenser 2.5 MFD, 240 volt, AC all as specified and directed. Make: EFCOS or equivalent

Taking out old modular switch in lieu of supply and fix modular type switch 6 amps one module all as specified and directed

Taking out old modular socket in lieu of supply and fix modular type multi purpose socket 6 amps two module all as specified and directed

Taking out old modular switch in lieu of supply and fix modular type switch 16 amps one module all as specified and directed

Taking out old modular socket in lieu of supply and fix multi purpose socket 16 amps 2 module all as specified and directed.

Taking out old modular regulator in lieu of supply and fix modular type fan regulator 120 W 2 module all as specified and directed

Supply and fixing of call bell, 230 V AC, single pole all as specified and directed

Supply and fixing bell push, flush type, 5 Amp all as specified and directed

Schedule of Credit (Minus) Rs. 65901.50 NOTE: Bidder shall insert credit amount of Rs. 65901.50 as rate in Green field under Col-5.

GMS Builders (BID ID -3432713)

K C ASSOCIATES (BID ID -3431827)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3431852)

MSR ENTERPRISES (BID ID -3431759)

SEMBA ELECTRICALS (BID ID -3431446)

RISHAN INFRA ENTERPRISES (BID ID -3432042)

VENKATESH (BID ID -3431843)