Repair and Restoration of Chocked and Damaged UPVC pipe watercourse and Damaged open water course of Direct Outlet at RD 91.838KM of Kandi Canal Stage-II

Amount

LINING

Dressing bed and preparation of sub grade for lining.

BRICK WORK

(i)) First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

10mm thick Cement Plaster 1:4

12.5 mm thick cement plaster 1:2

WATER SUPPLY

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Class PN-1.6 as per ISI

((i)) 450mm i/d Sluice Valves flanged

(81) Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

((b)) Capacity of Air compressor 550 cfm at 600 PSI

STEEL AND IRON WORK

(Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

DISMANTLING

Dismantling brick work tile, masonry or tile lining

((b)) In cement

Providing and fixing of ISI CI.D. Joint(complete with nut,bolts and rubber rings) as per IS 8794 for including , cutting, jointing and testing complete in all respects as per PWD specifications or instructions of the Engineer in-charge 450mm

Supply and fixing flange tail end point of 6kgf with C.I. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 450mm

CONCRETE

Cement concrete 1:2:4

a(ii)) mixing by mechanical means using concrete mixer volumetric type

EARTH WORK

Earth work excavation in ordinary soil, exclusive of compensation of earth:-

((b)) Earth work undressed with a combined lead upto 15 metres including breaking of clods.

(6.18) Dag-belling:-

((a)) Single Kassi stroke minimum 7.5 cm depth.

any other item

jhirmal singh govt contractor