REPAIR TO DRAIN SEWAGE LINE INTERNAL ELECTRIFICATION AND MISC B R WORKS ETC AT DGQA AREA G 6 STOREY BLDGS AT ANAND PARBAT IN THE AREA OF AGE B R II UNDER GE NORTH DELHI CANTT 10

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for omplete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for omplete all as specified and as directed.

M&L for rendering 10mm thick faces of brick work or concrete surfaces in CM 1:4 finished even and smooth and including Taking down cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

S & F for precast reinforced cement concrete cover slab in 1:2:4 using 20 mm graded stone agg and set in CM 1:4 all as specified and directed by Engineer-in-Charge.

Mild steel bars(TMT) 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT complete all as specified and as directed.

Cleaning of manhole up to 1.00 meter depth any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of manhole depth exc1.00 meter and n exc 2.00 meter of any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of sewage line from GT to Ist manhole complete all as specified and as directed. Note:-Cleaning of sewage line of daimeter upto 100mm to 150mm

Cleaning of sewage line 150 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 200 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and burried off the same out side the defence area notified by Municipal Corporation of Delhi all as specified and as directed by Engr-in-Charge.

Cleaning of sewage line, man holes exc 1.25 m depth and septic tank etc using mechanically oprated Hydraulic pressure machine equpied with jet and suction pressure cleaning all as specified and directed.(08 working hours for one job). Not work will be executed in foul condition

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified.

All as per item No 18 above but bore of pipe in 110 mm.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trneches or floors etc including taking out/dismantling of old pipes complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trneches or floors etc including taking out/dismantling of old pipes complete all as specified.

S&F PVC (SWR) bends any radius bore 75 mm

All as per item No. 22 above but bore of pipe in 110 mm.

S & F in repair precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:4 and including demolition of brick work built in cement morter incl all quoins arches pillars etc complete all as specified and as directed.

M&L for 15 mm thick rendering on brick or stone walls on fair faces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. (Water proofing compound shll be measure and paid separatelly).

Supply only Liquid water proofing compound and SBR of FOSROC as per manufactrurs instruction complete all as directed and specified.

Excavation in any type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out complete all as specified and as directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW / RCCpipes after they are laid and tested including demolition of old bed and pipes complete all as specified and as directed. (thickness of concrete bed 100mm).

All as per ser item No 31 above here-in-before but for 200 mm internal dia SGSW/RCC pipes (thickness of concrete bed 150mm).

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

All as per item No.33 here-in-before but 200mm internal dia of salt glazed stoneware pipes grade 'A' .

Supply & Laying 150 mm bore Reinforced concrete pipes, class NP2 pipes with spigot and socket joints, laid and jointed in trenches to a level on concrete bed complete all as specified and as directed.

All as per item No. 35 here-in-before but 200mm internal dia RCC class NP-2 pipes.complete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes omplete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consoilidation complete all as specified and directed.

M & L for Machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-50 grade with Grey cement and pigment complete all as specified and directed.

Demolition of precast concrete articles and prcast concrete blocks walling built in cement morter or cement lime morter complete all as specified and as directed.

M & L pre-cast cement concrete kerb stone type B-1(12.50 mm graded Aggregate) of size 300x300x150mm thick and setting in CM 1:4 complete all as specified.

M/L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, cemplete all as directed and specified

Dismantling asbestos cement (corrugated, semicorrugated etc) sheet in roof coverings including ridges,valley gutters etc complete all as directed and specified.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Welding in repairs n. exc 2.5cm in length thickness of metal to be welded n exc 6mm

Taking down steel window with shutters (without taking off shutters from the frames)of any descriptions not exc 1.5 sqm each complete all as specified and directed.

S&F Anodised aluminum alloy powder coated standard hollow section for window two tracks including aluminum frame/ chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket etc and other accessories complete all as specified and directed:- (a) Frame of section :- 83.50mm x 44.45mm x 1.60mm thickness, (b) Sliding window section (Channel):- 61.85mm x 31.75mm x 1.2mm thickness. (c) Sliding shutters of section: - 40mm x 18mm of 1.20mm thickness with locking arrangement. Note:- (1) The rates also including the cost of cutting, waste and making good disturbed surtace matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50micron. (3) Make for PVC Sheet :- Sintex, Rajsheer, Tata

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed.

Dismantaling wrought iron or mild steel work of any description not otherwise provided for all as specified and direcred.

S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred.

S&F 6mm thick polycarbonate sheet fixed with self tapping screws and including demolition complete all as specified and directed by Engr-in-Charge.

Dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed

M&L for glass mosaic tiles set and pointed with approved adhasive/morter as per manufacture instruction over 15mm thick rendering in Cm 1:4 complete all as specified and directed.

M&L in repair for Ultra design coloured tiles with PU coating of size 300x300x10 mm thick as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry complete all as specified and directed.

Taking down existing MS Gates and refixing in same position after raising the gap between road to bottom of gate by necessary And/Alt /welding properly new pintals/bearing all as specified and directed. Note :- Each leaf exc 100 kg N.exc 150 Kg

S&F for 150mm size brass handles,cast type,polished bright complete all as specified and directed.

S& F in repair 250 mm long brass sliding door bolt with sand or die - cast brass hasp , staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in repair for 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified.

S & F in repair Floor door stopper 150 mm (overall length of cover plate) of brass body and tongue with hard drawn steel spring complete all as specified and directed.

E/M Portion Taking down copper/aluminium point wiring (light, fan,buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials to store for keeping safe custody or for taking credit and making good disturbed surfaces of walls, floors etc as per existing all as Specified and directed.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box modular/conventional of 1.60 mm thick suitable size of modules for any type of switches/sockets/fan regulators with inner and outer cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

(a) One light point controlled by one switch

(b) One ceiling/exhaust fan point controlled by one switch

(c) One socket outlet 5 Amps controlled by one switch on same board

(d) One socket outlet 5 amps controlled by one switch on independent board

(e) One bell point controlled by one bell push switch

All as per item No. 02 here-in-before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

All as per item No. 02 here-in-before but for 15 amps socket outlet for AC/Geyser with 4 Sqmm Copper incl 4 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S & F modular switch 1 way 6 amps, 1 module complete all as directed.

S & F modular switch 1 way 16 amps, 1 module complete all as directed.

S & F modular bell push 6 amps, 1 module complete all as directed.

S & F modular sockets 6 amps, 2/3 pin combined two module complete all as directed.

S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as directed.

S & F modular fan regulator, step type, 120 watts, W-2 module complete all as directed.

S & F Bell Ding Dong AC, 230 Volts, Single pole complete all as specified.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete

S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete

S&F electronic fan step regulator flush type 120 watt, 230 Volt complete

S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.

S&F in reapairs of Modular type AC box (3 module) socket(20A) unit with 20 Amps MCB SP type complete all as specified and directed.

S&F in repairs of sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps complete. (Make- Indo asian/Havells/ Legrand/ABB)

M&L in repairs of Sub main wiring with 6 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed.

M&L in repairs of Sub main wiring with 10 sqmm (Nominal area) with two runs of single core cable PVC insulated FR multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed.

S & F in replacement Sheet metal enclosure DB ,Single pole and neutral with 200 Amps rated bus bar,230 volts, glazed, 12 way double door type, IP-43, including connecting all connections of wire to MCBs with proper copper lugs & arrangements, making good to the disturbed surface all as specified and directed.

All as per above but 8 way type.

All as per above but 4 way type.

S&F in replacement MCB, DP, 240 Volts, AC 63 Amps of breaking capacity 10 KA C curve.

S&F in replacement MCB, DP, 240 Volts, AC 40 Amps of breaking capacity 10 KA C curve.

S&F in replacement MCB, DP, 240 Volts, AC 16 Amps of breaking capacity 10 KA C curve.

S&F in replacement MCB SP 240 Volts AC 6 - 40 Amps of breaking capacity 10 KA C curve.

S&F of 300mm dia, 900 RPM, wall mounting fan oscalating type complete and UNSV fan deposit in E/M store yard. Make: Khaitan/ Crompton Greaves /Havells

S & F in repars of LED Batten type fitting for surface/wall mounted 20W,230V, LED 4 feet fitting indoor decorative LED engineering plastic batten with opal diffuser IP 20 integrated electronic driver completely prewired with connector blok, screws , gutties etc.all as specified and directed. (Make- Halonix cat part no- HLB-33-20-CW- IP equivallent in Phillips/Wipro)

S & F in repairs of LED Batten type fitting for surface/wall mounted 10W,230V, LED 2feet fitting indoor decorative LED engineering plastic batten with opal diffuser IP 20 integrated electronic driver completely prewired with connector blok, screws , gutties etc.all as specified and directed. (Make- Halonix cat part no- HLB-07-10-CW- IP equivallent in Phillips/Wipro)

S&F in repairs of surface mounted LED luminaires round/square type light weight plastic body downlight fitting 12 Watt, white housing with high efficient LEDs, glare free, full opal diffuser, IP 20,CDL type, integrated driver with all accessories making good the disturbed any type of ceiling complete all as specified and directed. (Make- Halonix/Philips/Wipro)

S&F in repairs of Indoor decorative aesthetically designed wall bracket light fixture with suitable for B22 type lamp holder with LED lamp,230V,cylindrical shape, fixed on wall with the help of screws incl complete all as specified and directed. (Make- Halonix HLWB-01 B22 or equivallant in Philips/Wipro)

S&F in repairs of lighting fixture wall mounted LED bulk head luminaire 10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with accessories all as specified and directed. (Make- Halonixcat part No HLBH-02-10-CW or equvallant in Philips/Wipro)

S&F LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb and all as specified and directed. (Make- Halonix/Philips /Havells)

S&F Indoor decorative 4W LED type bed side light fittings with all accessories 3 core copper wire for connection and remove the UNSV fittings and all as specified and directed. (Note : All above Srl 62 to 102 items for work portions of buildings upto seven storeys height complete).

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 65692.00

AAYUSHI ENTERPRISES

V r traders

QUALITY CONSTRUCTIONS CO

sony engineering works

M/s M M BAHL

V M CONSTRUCTION