Loading…
Loading…
Tender Value
₹12.1 L
EMD Value
₹30,300
Closing Date
16 Jul 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
SHANKAR S LAMANI
9449599110
Improvements to F type quarters at IB of Ambiknagar colony
KPCL/2026-27/BD/WORK_INDENT4399
KPCL/2026-27/BD/WORK_INDENT4399
Open
Buildings
Two Tender Document System(Two Cover)
KPCL Executive Engineer Colony Office KVP Nagjhari
12 documents required · 12 mandatory
Assessed available tender capacity (AxNx2.5-B) should be greater than the amount put to tender, where, A - Maximum value of works executed in any one year during the last five years (updated to 2026-27) price level taking into account the completed as well as works in progress. N- Number of years prescribed for completion of the works for which tenders are invited for 3 Months ( 0.25 year). B- Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 3 Months.
Duly filled qualification information as per section-3 along with supporting documents
Annual Financial Turnover certificate
Valid KPWD Class IV & above registration certificate
Income Tax PAN
GST Registration certificate
Independent PF code registration certificate.
Declaration I attached to bid document
Declaration II attached to bid document
Declaration III attached to bid document
Declaration IV attached to bid document
Declaration V attached to bid document. -Offer towards sale of released scrap materials
₹500
₹30,300
2 Jul 2026
2 Jul 2026
17 Jul 2026
15 Jul 2026
Improvements to F type quarters at IB of Ambiknagar colony
Dismantling Asbestos cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge.-Of sec...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.-Nominal concrete 1:3:6 or richer mix (...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and fixing to required line and slope roofing with semi corrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain an...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and fixing northlight adjustable ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjus...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing 100 x 50 mm 10 gauge non-galvanized weld mesh to concrete / masonry surface including cost of all materials, machinery, labour, fixing weld mesh to exposed reinforcement bars or b...
Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge -SS Handles 200mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge -SS Aldrop 16mm dia, 200mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge -SS Tower Bolts 200x10mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge -SS hinges 125 mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge -SS Door stopper 75mm
Supplying and installation of LD rectang. cover 455x610 mm with frame
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
F type quarters-KW1.doc
Tender Document • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].