SPECIAL REPAIRS AND ADDITION ALTERATION TO BUILDING NO P 24(URC) AT CGRA TUTICORIN and PROVISION OF WALL AND FLOOR PANELLING IN VARIOUS CABIN OF OTM BUILDING AT TUTICORIN OF UNDER GE(I)(CG) CHENNAI

Amount

Material and labour for Complete removal of existing treatment on wall surfaces and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

Material and labour complete removal of existing treatment by brushing and cleaing etc of wall surface including pilasters and cornices and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed. Make: Apex Ultima from ASIAN/Weather coast Smooth from Berger

Taking down chowkhats or frames exceeding 1.5 sqm each but not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Supply and fix Flush shutters 30 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides with face is covered with decorative face venner with lipping/frame to match complete all as specified and as directed.

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coated alumnium snap beading screws etc complete all as specified and as directed .Note : Minimum thickness of powder coating 50 microns.

Supply and fix 100 mm Butt hinges,medium weighted Stainless steel ISI Marked, and fixed and fixed complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed to door with MS screws complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed.

Supply and fix hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100 mm complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Non skid matt finish ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350mmx250mm x7 mm thick/450x350x x 6mm/7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 10 mm thick complete all as specified and as directed. Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Supply and fix Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix powder coated aluminium grill DG 916 of 10mm dia rod square/ rectangular/ circular or similar type of shape, aperture not exc 7 cm in length or width fixed with 'H' or 'F' channel of size 38mm x 12 mm x 1.30mm (Sec No 8778) Make : Grill No 20 of DECOREL complete all as specified and as directed.

Supply and fix frosted sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane fixed to aluminum frame complete all as specified and as specified

Taking up or down of unservicable/rusted steel tubing 25 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 20 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 15 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 32 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repairs PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed.Note :Make of flushing cistern :Parryware cat no : C8090 or Equivalent model in Neycer/ Cera

Supply anfd fix in repairsplastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices complete all as specified and as directed

Supply and fix in repairs vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated shower rose size 125 mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type, long body 15mm dia bore Bib tap , cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type 15mm dia bore Angle stop valve , cast copper alloy , screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.

Supply and fix in repairs CP hand shower( health faucet) with 15 mm dia and 1500mm long flexible tube with wall hookcomplete all as specified and as directed.

Supply and fix in repairs 20 mm dia Aluminium powder coated curtain rods fixed over windows/door openings complete all as specified and as directed

Supply and fix in repairs 20 mm dia fancy Aluminium powder coated knobs/brackets for fixing curtain rod of 20 mm diameter complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, ,15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.

Supply and fix in repairs75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix in repairs 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and iincluding taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme

Supply and fix PVC (SWR) floor trap of 75/110 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) gully trap of 125/110 mm dia of outlet , setting and jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply anfd fix in repairs Vitreous china wash down water closet pan,white ( including fixing bolts ) including connection to drain pipe and to flushing pipe etcand removing old one and taken as credit complete all as specified and as directed

Taking down roof treatment including plaster including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

Supply and fix Heat Resistant/Cool roof Terrace Tiles (300 mm x 300 mm and 8 to 10 mm thick) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 15 mm thick screed bed in CM 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including providing skirting upto 150 mm height along the parapet walls in the same manner over a rendering of 15mm thick in CM 1:3 with water proofing compound in the terrace floor and skirtings complete all as specified and as directed. Make:Johnson Endura/Khajaria Note:(I) Water proofing compound will be measured and paid separately. (ii) Water will be reatined in the roof for 48 hours for testing water tightness of the roof before passing for Payement.Payement will be proceed after the sucessful completion of water tightness of roof only.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

S & F Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screwscomplete all as specified and as directed

S & F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

Supply and fix Stainless steel (Grade 304) railing mode of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever requried) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasterners, stainless steel bolts etc of requried size on the top of floor or the side of waist slab with suitable arrangment all complete all as specified and as directed.

Excavating over areas n exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed

Removing excavated soil to a distance not exceeding 50 meter depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Material and labour for hardcore of guage n.exc 63mm, broken stone aggregate deposited, spread & leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and Labour for M-Sand Under floors as cushioning to tiles including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be measured and paid

Material and labour for Plain Cement Concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate ) 100 mm thick in sub base floors complete all as specified and as directed

Material and labour for Providing and laying Machine pressed rubber moulded precast concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade confirming to IS-15628-2006 complete all as specified and as directed., Make: M/S ULTRA TILES / M/s Topaz tiles /M/s Godrek Boyce Mfg Co Ltd , M/s NitcoTiles PVT LTD.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed. all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Rolled Mild steelsections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gde-E-250) quality B complete all as specified and as directed.

Material and labour for RCC (nominal mix) type B 1 1:2:4 ( using 20 mm graded stone aggregate ) as in beams, cantilevers,bressummers, lintel over 1.5 m span complete all as specified and as directed

Material and labour for RCC (nominal mix) type B 1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls ,beams and columns in floors ,roofs,landings,canopies and in the shelves etc complete all as specified and as directed

Material and labour for Steel formwork to soffits of suspended slab such as roof slab, floor slab, landings and similar work not exceeding 200 mm thick (Horizontal or Sloping) with rough finished surface of concrete complete all as specifed and as directed

Material and labour for TMT bars of grade Fe-500/500D of10mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also beams, etc.plays between floors and beams etc complete all as specifed

Material and labour for TMT bars of grade Fe-500/500D of 5 mm dia bar and overupto including 10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for damp proof course 25mm thick in plain cement concrete 1:2:4 type B0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

Supply and fix in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (including connections to flushing pipe and outgoing pipes fixed in repairs ) complete all as specified and as directed.

Supply and fix in repairs Modular switch 6 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular switch one way 16A, single pole, 1 module including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Stepped type electronic fan regulator flush type , socket type , 230V on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix in repairs modular white cover plate with frame 3- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular white cover plate with frame 4- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular white cover plate with frame 6- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular white cover plate with frame 8- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular metal flush box for 3 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular metal flush box for 4 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular metal flush box for 6 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix in repairs modular metal flush box for 8 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Material and labour for Painting of ceiling fan/Exahust fan/DB panel of any size/make/model complete in site with synthetic enamel paint by spray painting including filling cavities with filler after cleaning all dust etc and numbering of ceiling fan complete all as specified and directed .

Material and labour for dismantling exhaust fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Supply and fix in repairs Louvers suitable for exhaust fan of 300 mm sweep including taking down unserviceable louvers complete all as specified and as directed.

Supply and fix in repairs MCB SPN of rating 40Amps , 240 V, C curve ,Rupturing capacity10KA ncluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix in repair ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including non metallic rigid PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Material and labour for Point wiring with 2.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 2.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware.

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 4.0 sq.mm along with earth wire of size 1 x 2.5 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including rigid PVC conduit complete all as specified and as directed. Make of Cable: Finolex/Anchor/Polycab Make of Conduit :Avonplast /Finolex/Prestoplast

Supply and fix LED security light fitting 18W 5700K made up of pressure die cast housing with toughened glass with optics/diffuser IP66 protection complete including taking down unserviceable security light fittings of any type any watts and taken as credit complete all as specified and as directed Make: C&S Cat No LTESSE-18WLED or equivalent in Wipro/Philips

Supply and fix in repair and replacement LED 15 Watts Surface type square(1'x1') Light fittings suitable for fixing in ceiling at balcony complete with MS clamp and including connecting up with twin core twisted flexible copper conductor cable with suitable size. taking down unserviceable CFL security light fittings of any type any watts and taken as credit complete all as specified and as directedcomplete all as specified and as directed. Make crompton Cat part No:LSDEP-15-CDL.

Supply of LED light fittings 20W, 230V, 4ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 20 W 4 feet or equivalent in Havells/Philips.

Supply of LED light fittings 10W, 230V, 2ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 10 W 2 feet or equivalent in Havells/Philips.

Supply and fix in repairs of 2P+E Plug and Socket for AC alongwith MCB of rating 16A of rupturing capacity 10KA complete all as specified and directed.

Concealing the existing the point wiring with replacing the existing PVC with the same size at the site and making the surface good as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing wall mounting fans complete with blades 230 V, 400 mm sweep. Min air delivery 85 CMM, 2100rpm all as specified and directed

Material and labour for Double Charged Virtified tiles 10 mm thick polished ,area of each tiles exceeding 0.36 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Double Charged Virtified tiles 10 mm thick polished , area of each tiles exceeding 0.36 sqm in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Granite stone 20mm thick (black galaxy) work including (table rubbed and polished) in in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick cement mortar 1:4 in repairs complete all as specified and as directed.

Material and labour for Laminate wooden flooring of thickness 12 mm and AC 5 Grade with water proof/Resistant laying in floor surface and Door opening incluidng necessary preparation in the existing tile sufaces complete all as specified and as directed. Note: Colour shade of flooring will be apprvoed by GE Make: FLORZ (MODEL NO:1849-5) or equivalent in PERGO/QUICKSTEP

Material and labour for Laminate wooden flooring of thickness 12 mm and AC 5 Grade with water proof/Resistant laying in WALL SURFACE AND IN SKIRTING opening incluidng necessary preparation in the existing tile sufaces complete all as specified and as directed Note: Colour shade of flooring will be apprvoed by GE Make: FLORZ (MODEL NO:1849-5) or equivalent in PERGO/QUICKSTEP

Material and labour for Plywood 6mm thick, Grade BWR type BB, fixed with screws to timber frame work or walls complete all as specified and as directed by Engineer-in-Charge. Make: Greenply/Century Ply/ Kitply

VVM CONSTRUCTIONS