Renovation of EEI to Type-V Qtr. No. DD-4 near PBSD Office, South Point, Port Blair

Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

8 way , Double door

"Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and laying of DWC HDPE pipe of size 40/32, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and laying of DWC HDPE pipe of size 40/32, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level including hard surface) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and laying of DWC HDPE pipe of size 40/32, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16205 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complete with fitting and cutting, jointing etc. directly on surface as required.

Supplying of 6.0 sq.mm., 3- core XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor (Make: Havells or equivalent).

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe/PVC conduit pipe as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required.

Upto 35 sq. mm

Removing existing Post Top/Bollard light from the foundation by breaking the concrete and disconnecting the cables as required.

Supplying of Pedestal Lantern ( Bollard Light) with Aluminium body, IP65 suitable for 1xE27 LED lamp (Make: Philips, Model : Glide or equivalent ).

Supplying and fixing of 9W, E27 LED lamp, CDL/WW ( Make : Havells or equivalent ) on the existing lamp holder.

Supplying and fixing of 110mmx110mmx75mm Adaptable Box with Lid(Cable Junction Box) (Make: Presission, Code: PAB 110L or equivalent) with suitable connector inside on the existing concrete platform as required.

Installation, testing and commisioning of Pedestal Lantern ( Bollard Light) suitable for 1xE27 LED lamp on a platform with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with a minimum of 0.2m x 0.2m x 0.25m above ground level and 0.2mx0.2mx0.25m below ground level and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, screws, earthing etc. as required.

Supplying and fixing of Cable Junction Box, IP 44 (Make : Sintex,, Cat No. : GSJB-1414 or equivalent ) with a two pole connector and 6 A MCB, on the existing Gate Post including connection etc. as required.

Supplying, installation, testing and commissioning of 40W LED Gate Light (Make: Crompton, Model : MAPLE, Product Code : LPTO-40-CDL or equivalent) on the existing Gate Post including connections, earthing etc. as required.

JOY GURU ENTERPRISES

M/s Sai Electrical Works

M/s G K Construction

NAVJEEVAN ENTERPRISES