Providing special repair and upgradation of electrical installation in Auditorium and class room at top floor Science Block RKMV Shimla.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 5 Amp Modular Plate And Switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C

Wiring for group controlled ( looped) light point / Fan point / Exhaust fan point/ call bell point ( without independent switch etc) with 1.5 sq mm FRLS PVC insulated copper conductor singal core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

supplying and fixing of suitable size GI box with modular plate and cover in front on surface/recess including providing and fixing 6 pin 5/6 amp &15/16 amp moduler socket and 15/16 amps modular switch connection As required

supplying and fixing following modular base & cover plate on existing modular mattal boxes ect. As required

8 module

supplying and fixing following modular switch & socketon the exising modular plate & switch box incuding connection but excluding modular plate ect. As required.

5/6 amps switch

3 pin 5/6 a socket outlet

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-supplying and fixing of suitable size GI box with modular plate and cover in front on surface/recess including providing and fixing

Single pole. Cat-A.

Wiring for circuit/sub-main along with earth wire following size.HRFRLS/PVC insulated single core copper conductor cable surface/recessed steel conduit in medium class steel conduit as required

2x1.5 Sq. mm.+1x 1.5 sq mm earth wire

2x4.0 Sq. mm.+1x 4 sq mm earth wire

4x4 Sq. mm +2x 4 sq mm earth wire

Wiring for circuit/sub-main along with earth wire following size .HRFRLS/PVC insulated single core copper conductor cable surface/recessed medium class steel conduit as required.2X6 sq mm +1X6 Sq mm earth wire

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light 300 mm sweep

40/63 Amp 4 Pole

Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bar each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel having thickness of 1.6mm dust protected duly powder painted with detachable gland plate and other accessories including drilling holes on the board making connection earthing etc. as required.

63 Amp. Copper Busbar Chambers 15" ( Enclosure)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-16way

Double door-6way

S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings.

Specification of LED fittings:

Wattage of LED fittings - As per following parameter.

Total lumens of the fittings - as per wattage

Diffuser - Polycarbonate diffuser/PMMA

Operating voltage - 140 V to 270 V, AC supply or better.

Input frequency - 50 Hz + 1 Hz

Power factor - Minimum 0.90

Luminaire efficacy - ≥100 lm/w

Color rendering index - CRI shall be greater than 80

Working/ operating temperature - 00 to + 450c or better

Color temperature - 60000K + 10%

Electronic Driver

Drive current (LED) - As per OEM.

Operating voltage - 140 V to 270 V, AC supply or better.

Type of driver - Constant current output driver

THD - Less than 10%

Surge Protection - 2.5 KV minimum

Efficiency Driver - ≥85%

Protection - Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver - 2 years against manufacturing defect.

Fixture - Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model - Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED - 25000 burning hours at 70% lumen maintenance

Lumen output of the fitting

LED Batten Light ≥2000Lumens.

LED Batten Light ≥1000Lumens.

S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Wattage of LED fittings - As per following parameter.

Total lumens of the fittings - as per wattage

Diffuser - Polycarbonate diffuser/PMMA

Operating voltage - 140 V to 270 V, AC supply or better.

Input frequency - 50 Hz + 1 Hz

Power factor - Minimum 0.90

Luminaire efficacy - ≥100 lm/w

Color rendering index - CRI shall be greater than 80

Working/ operating temperature - 00 to + 450c or better

Color temperature - 60000K + 10%

Electronic Driver

Drive current (LED) - As per OEM.

Operating voltage - 140 V to 270 V, AC supply or better.

Type of driver - Constant current output driver

THD - Less than 10%

Surge Protection - 2.5 KV minimum

Efficiency Driver - ≥85%

Protection - Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver - 2 years against manufacturing defect.

Fixture - Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model - Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED - 50000 burning hours at 70% lumen maintenance

Lumen output of the fitting

LED Down Light ≥2400Lumens.

S/E of LED Track Light with CRCA/PDC body and diffuser The fitting should be installed on existing surface. The job includes carriage, erection, making connections testing and commissioning of the fittings.

Wattage of LED fittings - As per following parameter.

Total lumens of the fittings - as per wattage

Diffuser - Polycarbonate diffuser/PMMA

Operating voltage - 140 V to 270 V, AC supply or better.

Input frequency - 50 Hz + 1 Hz

Power factor - Minimum 0.90

Luminaire efficacy - ≥100 lm/w

Color rendering index - CRI shall be greater than 80

Working/ operating temperature - 00 to + 450c or better

Color temperature - 60000K + 10%

Electronic Driver

Drive current (LED) - As per OEM.

Operating voltage - 140 V to 270 V, AC supply or better.

Type of driver - Constant current output driver

THD - Less than 10%

Surge Protection - 2.5 KV minimum

Efficiency Driver - ≥85%

Protection - Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver - 2 years against manufacturing defect.

Fixture - Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model - Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED - 50000 burning hours at 70% lumen maintenance

LED Track Light 30 Watt

Supplying and Fixing PVC batten/ angle holder including connection etc as required.