Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹38 L
EMD Value
₹38,000
Closing Date
4 Oct 2023, 5:00 pmClosed
S.E. E D C- MVVNL,Unnao
Superintending Engineer Electricity Distribution Circle-Unnao
QUANTUM OF WORKS (17 WORKS) INVOLVED IN INCREASING CAPACITY OF DISTRIBUTION TRANSFORMER AT DIFF. SITES UNDER THE BUSINESS PLAN YEAR 2023-24 UNDER THE AREA OF EDSD-I, IIANDIII UNDER THE EDD-IV BANGARMAU UNNAO.
2023_MVVNL_844374_1
172/E.D.C./Unnao/2023-24
Open Tender
Miscellaneous Works
Fixed-rate
180 days
Unnao
AS PER TENDER DOCUMENT
2 documents required · 2 mandatory
₹3,540
A/C-No.3355002101008374,IFSC-Code-PUNB0335500
₹38,000
Yes
10 Oct 2023
29 Sept 2023
5 Oct 2023
29 Sept 2023
4 Oct 2023
29 Sept 2023
Amount
Safe Carriage of following T/F from Elec. Store Center Unnao to diff. work dump site along with loading unloading and propoer stocking.
T/F 25 KVA 11/0.4 KV
T/F 250 KVA 11/0.4 KV
T/F 400 KVA 11/0.4 KV
T/F 400 KVA 11/0.4 KV (With Mobile Trolly)
Other loose line materials with including conductor, PVC Cable, Insulator, Single Pole accessories etc. from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.
LT PVC Cable size 1x120 sq mm
LT PVC Cable size 3.5x400 sq mm
LT PVC Cable size 1x400 sq mm
LT PVC Cable size 1x630 sq mm
11 KV XLPE 3X120 sq mm
33 KV XLPE 3X300 sq mm
11 KV VCB O/G CTR 200/100/5
11 KV VCB I/C CTR 600/300/5
Dismentling of old & Damage 11 KV swichgears (Incoming & outgoing ) pannel in control room of 33/11 KV S/s Bangarmau, old Unnao.
Installation of 11 KV VCB O/G, CTR 200/100/5A, 350 MVA at 33/11 KV S/s Bangarmau.
Installation of 11 KV VCB I/C, CTR 600/300/5A, 350 MVA at 33/11 KV S/s Bangarmau.
Earthing of Well type of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp .
Safe Carriage of following 400 KVA Mobile Trolly T/F with Trolly from Elec. Store Center Unnao to division office dump site along with loading unloading and propoer stocking.
Fabrication, errection & commissioning of 25/63/100 KVA T/F on Double Pole/Single Pole with all accessories.
Laying of 33 KV XLPE Cable of diff. size with Drill mathod as per RESPO Norms with complete all work as required. (Only 33 KV XLPE Cable Provided By Department)
Laying of 33 KV XLPE Cable of diff. size with sand and bricks as per RESPO Norms with complete all work as required. (Only 33 KV XLPE Cable Provided By Department)
Fixing of 33 KV O/D Jointing Kit for XLPE Cable size 3x300 sq mm with complete all work as required.
Fixing of 33 KV ST/TH Jointing Kit for XLPE Cable size 3x300 sq mm with complete all work as required.
High pressure testing of 33 KV 3x300 XLPE cable along with arrangement of High Pressure equipment.
Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor)
Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system. (All the required materials as Al. Lugs Crimping Type for 250/400 KVA T/F , Copper L-piece 62x225x12 mm etc for above job shall be provided by contractor except T/Fs and LT PVC Cable)
Construction of retaining wall, fabrication & erection of Wiremesh fencing around Transformer with retaining wall & 01 nos. gate with locking arrangement made of MS Angle Iron of size 50x50x6 mm jointed with nuts and bolts. Wiremesh of size 10 swg rectangle type, its painting as per norms of RESPO. (All the materials will be arrangement by the contractor)
Earthing of Neutral of Transformer, Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor)
Constuction of masonry metalic type distribution pillar of size 1x1.5x2.5 Mtr. With supply & fixing of fabricated 4 Nos. doors (2ftx4ft) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. straight MS angle 50x50x6 mm (1800 mm long) 2 Nos. 500 Amp. 300 Amp henely Type Tailess Fuse Unit, 3 Nos. coper bus bar of size 1000x50x6 mm and one No. alum busbar 1000x50x6 including all civil material required for work. All material shall be supplied by contractor.
Supply and fixing of Copper L-piece 250/400 sq.mm. 4 Nos. and Allu. Lugs 400 sq. mm 12 no. All Material provided by contractor.
Safe Carriage of following T/F from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.
T/F 100 KVA 11/0.4 KV
T/F 250 KVA 11/0.4 KV
M/S EVERGREEN TRADERS
Pankaj Trading Company
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .