WBPHE/DIC/BMSD(D)/NIeT-05 of 2024-25/1

Amount

Supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of PHED --

Submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- Pump T/W-1: Duty condition -12 m3/hr Head- 57 Mtr Shaft-stainless steel Impeller- S.S / GM Outlet Size: 65mm / 80mm. Motor Submersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM Motor must be suitable for operation with DOL starter. (Test certificate along with characteristic curve should be submitted at the time of delivery).

3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

40W Tube Light

Holding Contractor Coil for 5HP DOL Starter as per sample.

Street light . Type : BRP 32 LED 60 CW SLR GR PSU. ( Make - Philips)

80mm dia. CI Top & Bottom adopter.

3" x 2" GI Reducer with 3" x 12" GI Pipe

Fitting fixing of supplied materials of (Sl. No 1.04-1.08) after dismantling of existing defective parts and reconnection along with supply and fitting of socket as per direction of EIC.(Including fixing of extra 1 no of street light)

Supply, Delivery & Installation of 63 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply, Delivery & Installation of 32 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply & Fixing of 100 Amps Kit-kat rewireable proceliain fuses carrier & base (Specification-IS:2086).

Supplying and fixing 240/415V MCB of Breaking capacity 10kA & Characteristics on din rail of existing DBs and necessary connection.

Supply,delivery and storage at store of automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 kg/ CM2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induction motor, Motor will be IE3. [Make of Machine: As per attached vendor list of PHED.] N.B. T.C. & G.C. of pump & motor needed.

Installation and commissioning of above supplied Chlorinator with all accessories, PVC tank and dawing of power line as per IE rules by supplying of necessary wire and continous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stonechips] and neat cement finish by supplying all required materials and testing the entire set as per direction of EIC.

Withdrawing the pumping Machinery along with column pipe from the bore well after making necessary arrangement and handling with chain pulley block complete to the satisfaction of EIC. Cost includes carrying of all materials as required tools and tackles along with electrical instruments etc. (≤ 20 H.P.) [P/H-1 & P/H-2 ].

Installation of the pumping Machinery making all required arrangement, cable joint with cable jointing kits suuplied by Agency , primimg free run fitting complete installation after making joints of column pipe using havox etc. for leak proof commissioning, testing to the entire satisfaction of EIC, works includes carrying charges as per Direction of EIC.

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed including cutting of a big dry tree in the premises. (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared). [PWD Building Page. 268 Item No. 19]

Taking out of old and damaged Sluice valve of from the existing line after dismantling of Flange Joint or Socket Joint and fitting, fixing of New Sluice Valve. (Cost of dismantling of joint and renewing the same to be added with this item to complete the job in all respect ) ( Dia. - 150mm)

Carrying Charges of materials like 1 set submersible set, 150mm sluice valve, 45 meter 3core 4sq.mm flat cable etc by road from Patelnagar Godown to Ahmadpur w/s Scheme including loading, packing, unloading and stacking charges etc. complete as per direction.

Labour charges for repairing the bursting /damage /leakage of 80mm dia, to 200mm dia. A.C Pipeline with detachable joints including earthworking excavation, tracing out the actual position of burst /leak, cutting pipe of required length, refitting the same with new pipes and old /new detachable joints after chiseling and shaping the pipe, bailing out water from the trenches and refilling the trenches to its original conditional complete as per direction of E.I.C. (Extra A.C.Pipes and detachable joints with rubberring, nuts and bolts etc.will be supplied from the scheme store, Surplus and unserviceable pipes and specials will have to be returned to the same store. The rates are inclusive of carriage to site of work and back carriage of materials to and from scheme store as mentioned above.)

Cleaning of over head reservoir, cleaning, washing and disinfecting the same with bleaching powder, including machinery, tools and plants as per direction of EIC complete (Bleaching powder will be supplied by the agency).

Add GST @ 18%

Add Cess @ 1%

SUNIL RABIDAS (BID ID -5682857)

S.K. ELECTRICALS (BID ID -5682853)