Erection of 21.00 Mtr height Angular Roof Top Tower(with Dept materials) including foundation over terrace of TE building (GF) at East Marredpally, Secunderabad.

Amount

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for :

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Supply of bolts including nuts and washers complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Extra for galvanizing (of thickness not less than 120 microns) on M.S angles , flats, gussets plates, bolts, nuts and other fasteners.

Transportation of 21.0 MTR roof top tower materials, & gantry materials, through Private Carrier from Store at Nacharam including shifting of material to terrace including segregation , loading , unloading and stacking in good condition etc complete as directed by Engineer-In-Charge( Approx Weight upto 2700 Kgs)

Labour for hoisting, erection and fixing of 21 mtrs height Roof Top Structural Steel Tower with all its necessary components viz climbing ladder, gantry etc., and fixing with bolts, nuts, plain and spring washers. Cost includes necessary welding and alteration of any mismatching holes to the members wherever required complete in all respect as per direction of the Engineer -in-charge including applying priming coat with one coat of Etch primer

(BISON wash primer or equivalent) approved brand and manufacture, applying priming coat with one coat of ready mixed Red oxide Zinc Chromate primer of approved brand and manufacture and Painting two or more coats with high gloss synthetic enamel paint of approved colour (International white and orange) & brand as per recommendation of international Civil Aviation rules in Galvanized structural steel tower. (NOTE: Rate includes cost of all operations involved in hoisting and erection of tower , painting including hire and labour charges of tools, plants and machineries all insurance, safety provision etc all complete and nothing extra will be paid) (Weight about 2.50 MT)

Drilling holes of 16mm dia in RCC slab/beam upto a depth 120 mm and embedding 12mm dia TMT bars of grade Fe 500D in the hole including grouting the hole with FOSROCK LOKFIX chemical or approved equivalent to anchor reinforcement excluding the cost of reinforcement as per direction of Engineer-in-Charge. ( the work shall be carried out as per manufactures specification through the Applicator approved by the manufacturer)