Construction of Resting hall for the devotees on pilgrimage.

Amount

Earth work excavation for foundation in all type of soils and sub soils to the required depth as directed including dense soil, disintegrated/weathered/soft rock not requiring blasting for Footings, Pile caps, Lift pits, etc... by mechanical means including manual excavation for levelling, dressing of sides and ramming of bottom with all leads and lifts, shoring, strutting and baling out water wherever necessary etc., as complete with all respects complying with relevant standard specification and as directed by the departmental officers. Rate to include backfilling, levelling, dressing of sides and ramming of bottom with all leads, lifts and filling inside the building plinth level including necessary compaction in layers of 150mm thick each complete as directed and dressing to proper level and graded as required etc, loading, unloading, plant and machinery, hire and fuel charges for tools and plants, shoring, strutting required to keep the earth in position and baling out water, dewatering of all ground, surface and rain water, removal of slurry generated while excavation and keeping the area free from water, removal of loose pockets, slips and falls during excavation and compacting the same, Slinging or supporting pipes, electric cables, royalties, Seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the departmental officers. Note: Rate to include for extra earthwork including authorized working space as per IS 1200 and provision of slopes, space for scaffolding, shuttering, shoring, strutting etc., Additional excavation if required for execution shall not be paid separately. The contractor shall keep the foundations dewatered and also arrange to drain them off by suitable drains and other means and keep the work place free from flooding / water logging and fit for carrying on the work unhindered. The contractor shall give a methodology of shoring, methodology of execution of excavation work and methodology for dewatering for the approval of departmental officers. (Only the PCC outer to outer dimension will be consider for the area of excavation and depth as per the actual ie depth till the bottom of sand filling below the PCC as per drawing) A) 0 to 2m depth.

B) 2 to 3m depth.

Supplying and filling in foundations and the area wherever specified with 'approved material' good quality filling materials in plinths, area development etc. wherever specified in layers of not exceeding 150 mm thick including clearing of jungle, bushes, breaking clods, storing, transportation, double handling, watering, compacting each layer with vibratory compactor and at un-accessible places with wooden/steel rammers to achieve 95% proctor density at optimum moisture content, all leads and lifts, bailing/ pumping out of water to keep site dry while backfilling complete as directed. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the departmental officers. Filling M.Sand

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Providing and laying Plain Cement Concrete 1:5:10 (1 of cement : 5 of coarse sand : 10 of hard broken stone jelly) using coarse graded aggregate of 40 mm for levelling course under footing, pile cap, steps, walls, raft, retaining wall, drains, kerb and median, platform etc. including all shuttering materials, labour charges, wastages , mixing, curing compaction, transportation, necessary lead and lifts etc. as complete with all respects complying with relevant standard specification as per IS 456-2000 and as directed by the departmental officers.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of M.sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. A) Foundation / Basement

B). Ground Floor

C). First Floor/ Terrace 1

D). Terrace Floor - 2

Supplying and fixing of Precast slab RCC 1:2:4 (1 of Cement : 2 of sand : 4 of Aggregate) for the following thickness using 20mm downgrade size hard broken stone jelly including the cost of molding with / without perforation of size as per drawing, labour charges, materials, finishing smooth on exposed surfaces, curing, transporting to the site, lead & lifts fixing in position, etc complete but excluding the cost of steel reinforcement and cost of shuttering and as directed by the departmental officers. 100mm thick, 450mm wide Precast slab

Supplying, fabricating and fixing in position of steel Fe 500D grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required. Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc...as complete with all respects complying with relevant standard specification, as directed by the departmental officers/ Consultant. A).Reinforced cement concrete Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, pile cap, raft slab / beams, RC Binders and such other members

B). Plane surfaces such as RCC floor slab, roof slab, flat slab, drop panel, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members

C). For plane surfaces such as rectangular, square columns and chamfered sunshades, top and bottom slab of boxing, kitchen platform, loft and such other structural members

D). Vertical surfaces - For all type of walls (any thickness) including, retaining wall, core walls, shear wall, parapet wall, fins, facia, kerb and median etc... for all floors & levels.

Providing and constructing of brick work in Cement Mortar 1:5 (One Cement and Five M.sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 41/2" x 2 3/4" with minimum compressive strength of 35 Kg per Sqcm for foundation and all floors including curing etc, Complete complying with standard specifications and as directed by the departmental officers. Foundation and Basement Level

Brick work in following Cement Mortar 1:6 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2- 3/4" for foundation and basement including curing, etc., complete complying with standard specifiction. A). Ground floor

B). First Floor

C). Terrace Floor - 1

Providing and constructing of 115 mm thick brick partition walls in Cement Mortar 1:3 (One Cement and Three M.Sand) using best quality Second Class Ground Moulded Chamber Burnt bricks of size 9" x 4 1/2"x 2 3/4" with hoop iron reinforcement if found necessary including curing etc., Complete complying with standard specifications and as directed by the departmental officers. A) Ground Floor

B) First Floor

Providing and fixing of well seasoned, best available Country , vengai wood frame or equalant for doors, windows, ventilators and any other similar joinery works of approved size and as per drawing detail. All exposed wooden surfaces are duly finished with melamine polish after sanding & filler the surface to get a smooth finish of required level. The rate shall be inclusive of making necessary design as per drawing, in the frame and necessary hold fastener and hardware ect, The rate shall be inclusive of supply and fixing of 6 nos MS flat iron holdfast for each door of size 40mmx3mm and 40CM long fixing with CC 1:2:4 and 75mm long 10mm dia anchor fastener to RCC location where ever required. Finishes shall made at Factory only installation at site as complete with all respects complying with relevant standard specification, as directed by the departmental officers

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.SOR - Page No : 70 / M0673

Supplying and fixing of Solid Core Flush shutters with commercial ply on both side with teakwook lipping alround 35mm thick, Alround fully Teak wood Beading 35mm x 12mm, 125mm x 30mm butt hinges - 3 No's, 150mm x 12mm Tower bolt - 2 No's, 10" Aldrop -1 No, 'D' type Handle 150mm - 2 No's,Rubber Bush - 40mm dia and 60mm long with required screws - 1 No etc SOR M-0387

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work SOR M-0678

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work SOR M-0674

UPVC Ventilator : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work SOR M-0675

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate isinclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc. completeSOR M-0651

Wall Handrail Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. completeSOR M-0652

Supplying, fabricating, erecting and fixing in position Monkey ladders and all miscellaneous steel works as shown in the drg. or as directed by the Engineer at all heights and levels using MS angles channels, rails, tees, plates, flats, rounds, squares etc., of various sizes and other structural steel sections. The rate shall be inclusive of finishing the MS surfaces shall be painted with 2 Coats (each coat of 25 microns DFT) of red oxide zinc phosphate primer and 2 Coats (each coat of 35 microns DFT) of synthetic enamel paint of approved colour and make Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, straightening, cutting, fabricating, welding, bending to shape bolting, installation charges, fuel, consumables, tools and tackles as complete with all respects complying with relevant standard specification and as directed by the departmental officers.

Providing and fixing welded M.S. grills for the window openings and any openings as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall include for two coats of first quality synthetic enamel paint over a coat of zinc phosphate primer, necessary tools & plants, welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the departmental officers.

Paving the floor with best quality Double Charged Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). Size of tiles shall be 600 X 600 X 8 mm Double charged vitrified tiles - Polished / Matt.

Flooring with following ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:5 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). Size of tiles shall be 300 X 300 X 8 mm - Ceramic Tiles

Paving the flooring with best of Granite Stone Slabs leather finish of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Dadooing with best quality ceramic tile walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. Size of Tile - 300 x 600mm x 10mm

Dadooing with best quality ceramic tile walls with following best approved quality, white / colour glazed tiles of following size 150mm x 150mm x 6mm set in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (one of cement : five of fine river sand) according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screw, necessary hacking in RCC surface, scaffolding, stagging, curing at all levels and elevations etc.as complete with all respects complying with relevant standard specification, as directed by the departmental officers.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas, RC walls etc.. with Cement Mortar 1:3 (one of cement : three of fine river sand) according to the specification. The rate shall include necessary hacking, staging, scaffolding and curing at all levels etc...as complete with all respects complying with relevant standard specification, as directed by the departmental officers.

Providing 12 mm thick water proof plaster in Toilet internal walls and over head tank with CM 1:3 (one of cement : three of fine river sand) with water proofing compound of CICO No:1 or equivalent as per manufacturer’s specification and roughening the surface in green condition with wire brush and clearing of loose particles with sponge brush (washed sand finish). Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Providing water proofing work over pressed Tiles and appalying Terrace Water proofing materials for arresting leakge portion Terrace area cracks ‘V’ groove cutting and GP2 packing. Applying on ELASTOCOAT two coating etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of respective water proofing treatment at below mentioned locations including all below activities. The surface to be waterproofed shall be cleaned to ensure it is free of laitance, loose particles, oily substance which may affect the adhesion of the waterproofing system, using mechanical rotary wire brush and related tools etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, staging, tools and plants, fuel, curing, cleaning, testing, consumables and also include for conducting leakage test at toilet sunken portion and over head tanks by storing water on the sunken continuously for a period of 7 days etc. as complete with all respects complying with relevant standard specification and as directed by the departmental officers.Supply and laying water proofing treatment on top of PCC laid for Grade slab, Raft, Pile cap ,footing & beam, UG Sump , Water tank etc., in the following order and consisting of following operations. i) Supply and applying of one coat of TAPECRETE Acrylic Polymer Cementitious Coating over rendered PCC surface. Application of CORCHEM 206 – I High Build Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm in two coats over TAPECRETE applied surface .ii)Supply and Fixing 75 mm long 18 mm dia GI nozzles in the hole of about half the depth of member size in grid pattern at a spacing not more than 1.0 meter c/c while casting the raft slab and along construction joints at a spacing not more than 1.0 meter c/c along the construction joints. iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement. iv) Sealing & cutting of the nozzles, and levelling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed.SOR M-0625 Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

Supplying and fixing Poly-propylene rungs of 25 mm square bar of size 260 x 170 mm for access way including anchorage in walls to a minimum depth of 100 mm with C.C 1:2:4 (one cement, two fine aggregate and four coarse aggregate) etc. complete and as directed by the departmental officers.( Duct ,Shafts & UG sump, Over Head Tank and wherever necessary) Note: Rungs to be fixed before concreting and necessary provision to be made in the shuttering. etc complete, as directed by the departmental officers.

Supplying and fixing Ductile Iron manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement, two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by the departmental officers .Manhole Cover 60 x 60cm (Heavy Duty) with Frame (O.H Tanks) SOR M-0640

Providing and laying in position the RCC humepipes(NP3) of approved quality and make including collars,. necessary Excavation, PCC 1:2:4 supports, Sand cushion of 150mm on all sides, Refilling with earth, Compaction and making good the level, alignment etc., complete as directed by the departmental officers. Supplying and fixing of 300mm dia NP3 class Hume pipe

Providing thermoplastic painting for car park and road line and arrow marks with 100mm wide involving cleaning the surface free of dirt and loose particles applying one coat , as directed by the Engineer-in-charge

Providing and laying at or near ground level factory made Saucer stone size 300x600x100 mm of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making by approved by Engineer-in-charge)

Special Type Mirror of size 1000 x 780mm rate to including all materials labour charges transportation lead & lifts wastage etc as complete with all respects complying with relevant standand specification as directed by the departmental officers.

Providing and laying spreading and compacting gracied stone aggregate to Wet Mix Macadam (WMM) 250mm thick specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 2

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) Colour glazed European Water Closet with 10 litre capacity procelin flushing tank fixed with CI brackets SI NO 99

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).SI NO 96

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). SI NO 92 Without Pedestal

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) Pillar Tap 15mm Page No 55 M-0542

vertical Blinds Health Faucet High Density Fibre (HDF) Board Page NO 67 M-0657

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).SI NO 115 A) 110mm dia

B) 75mm dia

Supply, Installing, testing and commissioning of stainless steel sink size 600 mm x600mmx200mm, with 15m dia CP swivel spout , 32mm dia CP waste coupling, 32mm dia CP bottle trap with extension pipe, supporting CI bracket to support sink, and CP wall flanges, and testing for leakages etc., (The sink & specials should be got approved by the exclusive engineer before use on works) Page No 55 M-0551

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Automatic Electrical Water Heater with copper container, with Glass Wool / Puf Insulation with MS powder coated shell suitable for 35 Litres capacity 230V / 1000W (Higher End) Page No 123 M-1331

EXHAUST FANS AC Exhaust Fan 375mm (15") Sweep (Heavy Duty) Page No 124 M-1344

Supply and fixing position of best Indain make while glazed earth war liped mouth flod back urinal of best guality and approvel make of size 430x260m 350m with GI pipe 32 mm dai by.

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). SI NO 89

SS Towel Rack 600mm long with Lower Hanger Page No 90M-0564

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) Nahani Trap of size 100 x 75mm with stainless steel gratings SI NO 102

PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing Special Type Mirror of size 1000 x 780mm Page No 56 M-0568

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 50mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level A) 75mm dia

B) 110mm dia

C) 160mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level A) 50mm dia

B) 75mm dia

C) 110mm dia

D) 160mm dia

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class ground Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. A ) CLEAR SIZE 0.45 X 0.45

B) CLEAR SIZE 0.60 X 0.60

C) CLEAR SIZE 0.90 X 0.90

Manhole Cover 60 x 60cm (Heavy Duty) with Frame Page No 60 M-0640

Supply, installation and testing of CPVC pipes and fittings SDR-11 (upto 50mm dia) & SCH 80(above 50mm dia) conforming to ASTM D 2846. CPVC fusion compound shall conform tro ASTM F493. The scope of including, cutting, cleaning and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Internal Concealed,above ceiling piping , Shaft & terrace) (DWS, HWS & RO)as directed by the depatmental officers SI NO 149 A) 20mm Dia

B) 25mm Dia

C) 32mm Dia

D) 40mm Dia

E) 50mm Dia

Supplying and fixing in position first quality and approved variety of Gun metal gate valve / wheel valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications ( for both internal and external water supply arrangements). the valves to be used on work shall be got approved by the executive engineer before use on work.SI NO 84 A) 20mm Dia

B) 25mm Dia

C) 32mm Dia

D) 40mm Dia

E) 50mm Dia

F) 65mm Dia

Supply, installation and testing of CPVC pipes and fittings SDR-11 (upto 50mm dia) & SCH 80(above 50mm dia) conforming to ASTM D 2846. CPVC fusion compound shall conform tro ASTM F493. The scope of including, cutting, cleaning and fixing Pips at Below ground level, etc.,. The quoted rate shall include for making necessary Excavation, chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. Fixing of pipe over the PCC pedestal pipeline is done at no extra cost and is included in the cost of installation of piping.(External below ground piping ) (DWS, HWS & RO)as directed by the depatmental officers SI NO 150 A) 25mm Dia

B) 32mm Dia

C) 40mm Dia

D) 50mm Dia

E) 65mm Dia

HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) Page No 112 M-1069 7.5 HP Submersible Pump

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed fris copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (DATA-A)

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed firs copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (DATA-B)

Wiring with 3 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End [DATA- C]

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point (8 points / Coil) Higher End (SD-308)

Supply and fixing of 4' 20W LED fittings with LED on wall or Ceiling with PVC unsheathed copper leads for terminals to the fitting (Heigher end) [DATA -D]

Supply and fixing of 4' 20W LED fittings with LED on conduit pipe suspension from the Ceiling with PVC unsheathed copper leads for terminals to the fitting (Heigher end) [DATA -D]

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.SD.439

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.[SD 441]

Supply and fixing of WT Bulk head fitting with guard and 15 W LED bulb (SD-83)

Supply and fixing of 9 W LED bulb for BH point (DATA F)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD-448)

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp (SD-498)

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with out provision of hole in the wall (SD-116)

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan (SD-121)

Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-377)

Supply and fixing of 2nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-383)

Supply and fixing of 1 no.16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-401)

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete.(Data-G)

Supply and fxing of 32A FP MCB in sheet steel enclosure box with electrical connections complete.(Data-H)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-514)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-526)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-573)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 2 nos. 32A SP MCB,6 nos 6A to 32 Asp MCB as outgoing in flush with wall with earth connection only. Higher End (Data-J)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour [SD 337]

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed frls copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour [SD 351]

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed frls copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour [SD 357]

Supply and Run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (SD-359)

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD- 662)

Supply and clamping of 3-1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS calmps (SD-203)

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection (SD-167)

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD-216)

Supply, Erection, testing and commissioning of 125 A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers. 1. 125A 4 pole MCCB -1 No. 2. 63A A 4 pole MCCB -6 Nos. The busbar chamber shall consist of 4 Nos 25mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses. The 25mm x 6mm copper flat for interconnection between TPN switches to buses. 25mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (Note: All SDF unit shall be of L&T / Siemens make). (Data K)

Supply and fixing of TNEB powder coated meter box of 16 SWG suitable for 125A Three phase service connection with 3 nos. of 125A fuse unit (500V), 125 A neutral link, 125A TPN Switch with HRC fuses, Neutral and earth link (1" x 1/8" copper flat) on on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (Data L)

Supply, erection, commissioning and testing of 100 KVA Diesel generator with acoustic IV + norms and BLS specification with AMF panel arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with 120 BHP at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with the Engine. The alternator should have brushless self-excited Y connected, self-regulated of continuous rating, developing an output of 32KW at 0.8 power factor lagging, 415 V, 3 phase, 50 Hz at 1500 rpm with a voltage regulation of ±1 % under steady state condition with over speed capacity of 10% for 5 minutes withstanding capacity with class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, built & tested to IS, BS, IEC or any other equivalent Indian or International Standards The engine should be provided with suitable electrical starting system including, suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. microprocessor based genset controllers display and displayed at phase voltage & currents, Frequency, reverse Power, Genset KVA, KW, KWh, KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto / manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections, fuel level indicator and with a capacity of not less than 50 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The fuel tank should be filled with a minimum level of fuel for test running on full load. (Make: Ashok Leyland / eql) (Data M)

Supply and fixing of 100A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 649)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 211)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD 76)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 371)

Supply and providing electrical safety & firefighting accessories complete as detailed below. A) ABC type 6 Kg fire extinguisher - 6 Nos. B)11 KV Rubber Mat of size 2m x 1m confirming to IS - 2 nos C)First Aid Box complete with all First Aid Medicines - 2 Nos d)Shock Treatment Chart fixed in glass frame - 2 Nos E) Fire Buckets - 4 nos. with MS Angle frame stand - 2 Nos F) Hand Gloves 11KV Grade - 1 pair G) Danger Board with danger caution sticker notices - 1 Set (Data N)

Design, Supply, erection, Testing, Commissioning and handing over of High Mast Structure (Bajaj / Philips / Crompton make or equivalent) with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base mast section with vertically moveable hot dip galvanised lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos of 200W LED flood light luminaries with control gear box complete head frame assembly, pulley drive stainless steel wire rope single / double drum self-lubricating winch arrangements suitable for raising and lowering the luminaries carraige ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and templates including supply and fixing the following accessories in the Mast design and casting of suitable foundation with 1:2:4 mix RCC concreate with 30cm projection above the ground level with 1 mtr width x 1mtr length x 2 mtrs depth with necessary galvanised foundation bolts nuts and washers and dump plates enclosing the bolts nuts for high mast cosidering the safe soil bearing capacity at site-1 Set b) High powered power tool with complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V /50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch-1 SET c) Feeder pillar box comprising of 0.90m x 0.45m x1.20m floor angle iron frame with 63 A power contactor starter for the 3 Phase motor-1Set d) Neon aviation obstruction light (Bajaj/equivalent) - 1No. e)2Nos of special GI earth electode with copper plate 300 x300x3mm and copper flat (1"x1 1/4")inter connection as per ISS complete with earth connections-1SET f) Hot dip galvanised lighting arrester- 1 No)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 658)

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps. (SD 199)

Supply and fixing of brass cable gland for 4 x 16 / 4 x 10 sqmm PVC armoured LTUG cable with earth connection. (SD 161)

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour. (SD 543)

Supply and laying of 2 x 10 s.qmm PVC LTUG cable suitable size HDPE pipe in a trech to be excavated at a depth of 0.75 metre and refilling the earth to make good (Data P)

Supply and clamping of 2 x10 sq.m PVC LTUG armoured Alu cable on post or on wall with MS clamps (SD-194)

Supply and clamping of 2 x 10 sq.mm PVC LTUG Armoured Alu cble with GI pipe on post or on wall MS clamps (SD 194 + cost of GI) 314 + 151.40)

Supply and fixing of brass cable gland for 2 x 10 sqmm PVC armoured LTUG cable with earth connection (SD -160)

Sub Total

DHANUSU SIVAGNANAM (BID ID -1148050)