REPAIR TO CERTAIN INTERNAL ROADS AND ROAD FURNITURE OF CERTAIN UNIT UNDER AGE B/R - II KAMPTEE AT GE KAMPTEE.

M&L for Premix bituminous, macadam (consolidated thickness 75mm or less consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed.

M&L for Premix bituminous, macadam (consolidated thickness 75mm or more consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed.

Preparing existing black top by brushing with wire brush, for removing caked mud, etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly tack coat of paving bitumen VG-10 @ 5Kg per 10 Sqm. Complete all as specified and directed..

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft and loose soil complete all as specified and directed

M&L for150 mm ( compacted thickness) of Moorum spread rolled and consolidating by power roller to gradient and camber as required as in berms complete all as specified and directed

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed.

M&L for prepration of road surfces and applying thermoplastic reflective paint marking 2.5 mm thick single coat as in lines, dashes, arrows, letters, zebra crossing of 100/150 mm wide using HOT MARK thermoplastic modern propelled road marking machine incl all necessary ingredients such as binder, glass beads . titanium dioxide calcium carbonate inter fillers thermoplastic requiredments for glass beads shall be table No 8004 of MORTH speccification incl spraying of glass beads etc.th etc complete all as per manufactures instruction and as directed. NOTE: Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint.

S&F solar road studs of size 125mm x 125mm x 20mm, aluminium alloy & polycarbonate stud (Red/yellow LEDs) 3+3 LED's with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long, complete as per MORTH/IRC specifications

S&F in repairs aluminium road stud two way reflective dimension 110x128x30 mm alluminium alloy body reflective panel amber/ red or weight 530 gms complete luminium coated of approved