REPAIR/ REPLACEMENT OF BOUNDARY WALL, PATH AND CERTAIN B/R WORK UNDER AOR OF GE (EAST ) FEROZEPUR CANTT

Amount

Dismantling posts or struts (wood, steel or RCC) any section,including taking out embedded portion and making good disturbed natural ground all as specified.

Excavating in post holes(or similer holes) in soft/ loose soil each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface all as specified.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified.

S&F Mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.

S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified.

Dismantling fencing wire mesh,any type.(for Chain link Fencing) all as specified.

S&F Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm complete all as specified.

S&F Mild steel Round bars 10mm dia and over,cut to length, bent to shape required,complete all as specified.

S&F GI chain link fancing 100 mm diagonal mesh size of 3 mm dia wire fixed angle iron fencing post including prov. of binding wire complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & pigment complete all as specified and directed by Engineer-in-charge.

M&L Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick using grey cement and no pigment set over & including 15 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified.

M&L for PCC 50 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, including necessary form work complete all as directed.

Complete removal of existing treatment on terra- cotta floor surfaces like a pathway pavers , Chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of expoxy exterior emulsion paint over a coat of primer complete all as spd and directed by Engineer in Charge

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 20 above but using old bricks retrieved from above including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair. complete all as specified and directed

M&L 10 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces in ceiling, soffits of chajja or similar location etc surfaces finished even and smooth without using extra cement, complete all as specified & directred.

M & L of Preparation of new plastered surfaces and applying two coats of white wash on walls complete all as specified.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified.

M &L Preparation of new plastered surfaces wall and applying two coats of oil bound distember over a coat of primer complete all as specified.

M &L Preparation of new plastered surfaces and applying three coat of White wash to ceiling all as specified.

M&L for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

M&L for preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed

S&F in repair Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 30 mm, fixed with steel screws complete all as specified.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including backing coat with 10 mm thick in CM 1:4 complete all as specified and as directed.

S&F of Glazed coloured and cereamic tiles 300X200X7mm / 450X300X7 mm in vertical surfaces thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10mm thick in cement mortar 1:4 all as specified and directed

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S & F to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

S & F of Gypsum Board 8 to 9 mm thick, 60x60cm in ceiling fixed with screw including aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling ( consist of aluminium angle 25mm X 25mmx0.3mm, Main tee 38mmX23mmx0.3mm, Sub tee 23mmX23mmx0.3mm) including hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

Dee Kay EnterPrises

M/s Surjit Singh and bros

M/s Bansi Lal