DEVELOPMENT OF BADKHAL LAKE MARINA WITH DEFECT LIABILITY OF TWO YEAR INCLUDING MAINTENANCE FOR 5 YEARS UNDER SMART CITY MISSION

Amount

PLAY EQUIPMENT AND OPEN AIR GYM

Open Air Gym Equipment

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Chest Press,Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Wheel / Shoulder Twirl,Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Hand Rower.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Back Extension.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Shoulder Exerciser.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Aerial Stroller.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Leg Extension. Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s ABS Board (Double).Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Sky Walker.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Surf Board.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Hip Twister Circular(Double).Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Leg Press (Double).Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Circular Pull Up Station.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s Cycle.Product details as per attached Specification.

Supply and Installation of Open Air Gym (Outdoor) Equipment’s EPDM Rubber Flooring.Product details as per attached Specification.

Play Equipment

Providing and fixing in play equipment , including excavation of 0.45 x 0.45 x 0.45 m size pit and fixing the each supporting leg / anchoring arm. of playing instrument in grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. completeA-Multi activity play equipment with straight tube slide of 5' ht, small wave slide 5' ht with slide entry, an railing with abacus play system, an FRP steps to climb to a metal sq deck with attaractive canopy.-Play zone 5.9m x 3.8m '-Max platform. ht 5'-Age group 5-12 yrs.

Providing and fixing in play equipment , including excavation of 0.45 x 0.45 x 0.45 m size pit and fixing the each supporting leg / anchoring arm. of playing instrument in grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete .A-Multi activity play equipment with straight tube slide of 6' ht, small wave slide 6' ht with slide entry , a tunnel entry, an railing with abacus play system, an FRP steps to climb to metal sq deck for slide entry and tunnel entry and the idividual deck for slie and tunnels shall be connected to each other with attaractive roof canopy.-Play zone 11.8m x 7.6m '-Max platform. ht 6'-Age group 8-12 yrs.

Providing and fixing Elephant see - saw Product Area :0.4m X 0.75m,Safe Play area:1.4m X2m,Ideal For : 3-8 Years Friends at a time :2, on suitable location at smart park

Providing and fixing Standard See-saw, Product Area : 2.5m X 0.3m, Safe Play Area :3.5m X1.3m, Ideal For :4-10 Years, Friends at a time : 2 no.on suitable location As indiacted in the drawing.

Providing and fixing Double Post Swing,Area : 3.5m x 1.0m,• Safe Play Area : 4.5m X 2.0m • Ideal For : 4-14 Years, Friends at a time : 2 on suitable location at smart park,

Providing & Fixing of play equipment , including excavation,making concrete foundation for play equipment,anchoring with fastner,epdm flooring etc. complete. of Delux slide 1.5 mtr having Dimension: • Product Area : 4.5m x 0.7m (14.8ft x 2.3ft) • Safe Play Area : 5.5m x 1.7m (18ft x 5.6ft)-Age Group : 4-12 yrs. Product details as per attached Specification.

Supply and fixing of Children Adventure Play Equipment ZOOK . The equipment comprises of 1 number of Upright structural posts of height 2.00 m , and 2 numbers of Upright structural posts 2.60 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm thickness of the tubing. The Rock Climber clamped to the poles is of size 1655 mm x 1148 mm x 2410 mm in which the climbing pegs are connected in a PE board is of size 150 mm x 109 mm x 74 mm. The triangle shaped Zig Zag jumper which is of size 1200 mm x 90 mm x 33 mm. The triangle shaped Fin climbers which is made of PE and 3 holed plastic climber are fixed in galvanized steel rods is of size Dia 48 mm. These climbers are fixed between the 3 poles with 2 top rails which is made of galvanized steel is of size Dia 60 mm. The net jumper is of size Dia 1100 mm is connected to the poles with 2 curved rods of size Dia 60 mm and is made of galvanized steel. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. The rates are inclusive of all taxes, transportation charges and installation. ALL COMPONENTS DESIGNED AND MANUFACTURED TO MEET WITH EN 1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: 7.90 m x 2.36 m x 2.66 m.

Supply and fixing of Children Adventure Play Equipment Vanquish - E :Curved structural posts of height 2.6 m, 3.0 m and 3.68 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.Handrail Dia 60 mm shall be an all-robotic welded unit, fabricated from galvanized steel pipes with a baked on powder coating [using AkzoNobel INTERPON paints] finish. The Electro- statically applied polyester powder has a tough finish with maximum durability using AkzoNobel INTERPON paints application, and dual zone cure oven to a thickness of 0.5mm thickness.Twirl of size 3.0 m x 0.7 m, Stepping stones of size 2.8 m x 0.72 m, Twist net climber of size 2.75 m x 0.40 , Trigonal seat stone see saw of size 3.0 m x 0.36 m , Elliptical net climber of size 1.86 m and 8 shape hole climber are all robotic welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 25mm O.D. galvanized steel for the inner parallel bars.Plastic Components [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards as a safety..All joints are Robotic welded. ALL COMPONENTS DESIGNED AND MANUFACTURED TO MEET WITH EN 1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: 9.82 m x 7.84 m x 3.68m

Supply and fixing of Children Adventure Play Equipment Montercarlo : Upright structural posts of height 2.2 m , and 2.7 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.The Rock Climber clamped to the poles is of size 1410 mm x 900 mm x 1990 mm in which the climbing pegs are connected in a PE board is of size 150 mm x 109 mm x 74 mm.Monkey bars of size 2060 mm x 990 mm x 1950 mm Handrails of Dia 38 mm shall be an all-robotic welded unit, fabricated from galvanized steel pipes.Slide of size 2.18 m x 2.02 m x 1.60 m , are all robotic welded fabricated from 60 MM O.D. galvanized steelmpipes for the outer bars and 32 mm OD galvanized steel for the inner parallel bars.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards as a safety.All joints are Robotic welded. ALL COMPONENTS DESIGNED AND MANUFACTURED TO MEET WITH EN 1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: 10.15 m x 5.76 m x 2.77 m

Supply and fixing of Children Adventure Play Equipment Alexandria - U: Curved structural posts of height 2.16 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.Handrails of Dia 48 mm and 32 mm shall be an all-robotic welded unit, fabricated from galvanized steel pipes,2Nos of Stepping Stones of Dia 0.32 m(single stone),2Nos of Circular shaped climber of Dia 0.21 m Plastic Components [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 -8mm,Slide of size 2.37 m x 0.39 m x 1.21 m ,Rotating disk of size Dia 0.9 m, Twirl of size 0.75 m x 0.75 m, Bent climber of size 2.68 m x 0.60 m, Frisbee Climber of Dia 0.4 m x 1.76 m are all robotic welded fabricated from 60 MM O.D. galvanized steel pipes for the outer bars and 32 mm OD galvanized steel for the inner parallel bars,Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards,All joints are Robotic welded. ALL COMPONENTS DESIGNED AND MANUFACTURED TO MEET WITH EN 1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: 10.50 m x 5.92 m x 2.58 m

STORM WATER DRAINAGE AND SEWERAGE

Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M?15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect.

Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M?15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr .

Labour charges for construction of Soakage well of 90 Cm. dia (Earth –work & its disposal ,with in a lead of 0.5 Km .only ).

Construction of Man hole, in all types of soil, inner size 1.5x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thickcement concrete 1:5:10 in foundation, 20mm thick insideplaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring making channels, 80mm thick stone slab covering with 40 mm thick M-15 gradeC.C. flooring, Ferro Cement cover with frame of 450mmdia, earthwork etc. complete including disposal of surplusearth within 50 mtr. lead as per design :Depth up to 1.5 M

IRRIGATION WORK

Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.

RCC Sump for pump of Size 1500 (L)x1500(W)x6000 mm(H)-13500 ltr.

Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe size 200/250 mm) supply and Install complete upto 5 WHP inclusive of 40 metre long submersible cable and starter.

Mannual water Irrgation system

Pipes Work: Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturer's instruction.--- PVC pipe 75mm-10 kg/cm²

PVC pipe 63mm-6 kg/cm²

PVC pipe 50mm-6 kg/cm²

PVC pipe 40mm-6 kg/cm²

PVC pipe 32mm-10 kg/cm²

PVC pipe 20mm-10 kg/cm²

PVC fittings

WATER SUPPLY

Supplying and laying of HDPE pipe PE100,PN6 marked along with all accessories like socket, bend, couplers etc. conforming to IS 4984 :2016, complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. (i) 50 mm dia (OD-50 mm nominal)

Supplying and laying of HDPE pipe PE100,PN6 marked along with all accessories like socket, bend, couplers etc. conforming to IS 4984 :2016, complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. (i) 32 mm dia (OD-32 mm nominal)

TUBE WELL

Supply and fixing of 10 HP 15 stage submersible motor pump,( CRI, BS, Kirloskar )make with all charges loading / unloading, transportation, lowering complete in all respect

Providing & Fixing of Panel Board (M.S.Hut, Main switch, Amp. Meter, Volt meter, Power capacitor, Single phase preventer & Automation system etc.) complete in all respect to drive motor pump of capacity 10 H.P. (L&T, BCH & TC make) complete set.

UNDERGROUND SUMP

Electrical works (Badkhal Lake)

Supply of 11kV CT/PT operated static consumer meter (DLMS compliant) of class 0.5S accuracy and rating -/5A as per IS 14697 and IS 15959 Category- C Nigam technical specification with latest ammendment thereof.

Supply of Polycarbonate weatherproof outdoor type meter cover box for three phase meter 445mm X 345mm X 170mm along with zinc plated clamps as Nigam's tech specs

Installation of 3ph 4 wire HT CT operated (Including CT PT) trivector meter (DLMS compliant)

Supply of 11kV Metering CT Ratio 5/5A, 10/5A, 15/5A, 25/5A, 50/5A, 100/5A, 150/5A, 200/5A, 250/5A, 300/5A,

Supply of 11kV PT

Supply of 11kV Protection CT

Erection of 11kV CT or PT complete in all respect

3 Phase LT Energy Meter

Supply of Three phase 4 wire LT CT operated (Inbuilt CT) static energy meter (40-200A) of class 1 acccuracy (DLMS compliant consumer meter) with GSM modem and confirming to Nigam;s specification and latest ammendment thereof

Supply and erection of Deep drawn MS sheet weather proof outdoor type Meter cover box for 3 phase meter size 500*300*160mm along with zinc plated clamp as per Nigam tech specs

Erection of LT CT in all respect

Installation of 3 ph meters in urban areas

1 Phase Energy Meter

Single phase DLMS compliant whole current static energy meter Class 1 accuracy-1 as per Nigam's technical specification , relavant ISS with uptodate amendment of rating 10-60A with communication and upgrading facility along with lates ammendment (with meter cover box)

Installation of 1 ph meters in urban areas

Supply of Meter outgoing connector box

Supply of Metallic meter pillar box (MMPB) to house 20 No. single phase meters in accordance with approved design/drawing of Nigam with seperators, in-let and out-let holes per cable, door lock, transperant glass cover for meter reading, civil works/ plinth etc. (20X1 MMPB)

Supply of Metallic meter pillar box (MMPB) to house 6 No. single phase meters in accordance with approved design/drawing of Nigam in-let and out-let holes per cable, transperant glass cover for meter reading, to be mounted on PCC poles (6X1 MMPB)

Erection of meter box including meter outgoing connector box, connection, installation of cleats etc. complete in all respect Erection of meter box to house 20 Nos. of single phase meters in accordance with approved design / drawing of Nigam with seperators, in-let and out-let holes per cable, door lock, transperant glass cover for meter reading etc. (20X1) complete in all respect.

Erection of meter box including meter outgoing connector box, connection, installation of cleats etc. complete in all respect Erection of meter box to house 6 Nos. of single phase meters in accordance with approved design / drawing of Nigam in-let and out-let holes per cable, transperant glass cover for meter reading to be mounted on PCC pole etc. (6X1) complete in all respect.

PCC Pole 9 mtr long.

Muffing of 9 mtr long PCC pole (1.5 mtr below the ground and 0.3 mtr above the ground)

Conventional Substation

Supply, Installation, Testing and commissioning of Outdoor type, 11kV SF6 type, extensible and motorized , 3 way smart Ring Main Unit (RMU) complete 1 VCB and 2 LBS and Auxillary transformer, FPI but without FRTU as per Nigam's technical specification no. CSC-117/R-1/DH/UH/P&D/2016-17 with latest amendments. The RMU shall have complete wiring and capability to connect /integrate the FRTU in future for enabling the SCADA functionality

Supply of 400KVA, 3 Phase, 11kV/433-250V, oil immersed, naturally cooled, copper wound outdoor type distribution transformer as per latest nigam technical specification with ammendments relavent ISS with latest ammendments.

Erection of transformer on plinth above 200KVA to 500KVA 11/.4 complete in all respect

Erection of cable box with fitting

Transformer platform set (GI) compl. Wt. 69kg

Automatic Power Factor Controller

S u p p l y i ng and erecting 125 kVAr, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and havingminimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitablesteps of MPP /APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

LT Panel

Main LT Panel-Supply, Installation, Testing and commissioning of indoor type wall mounted/free standing LT panel with 650A Al busbar, IEC 60947 compliant breakers, MFM for Check metering, SPD type 1, RYB indication LED lamp, Voltmeter with VSS, Earthing arrangement as minimum(i) Incomer as Microprocessor Based based 4 pole, 630A, 50kA fix type ACB as per IEC 60947 with pad locking facility, Ics=Icu=Icw for 1sec., with standard accessories and thermal magnetic release on provided iron frame(ii) Outgoing feeder as below:#Thermal Magnetic based 315A, 35kA FP MCCB, Ics=100% of Icu: 2 nos.#Thermal Magnetic based 400A 35kA FP MCCB, Ics=100% of Icu: 4 Nos,

LT Panel 1-Supply, Installation, Testing and commissioning of indoor type wall mounted/free standing LT panel with 350A Al busbar, IEC 60947/IEC 60898 compliant breakers, RYB indication LED lamp, Voltmeter with VSS, Earthing arrangement as minimumi) Incomer as Thermal Magnetic based TPN, 315A, 35kA MCCB as per IEC 60947 with pad lockingfacility, Ics=100%Icu for 1sec., with standard accessoriesii) Outgoing feeder as below:#Thermal Magnetic based 160A, 35kA TPN MCCB, Ics=100% of Icu: 2 nos.#32A 10kA C Curve TPN MCB: 6 Nos,

LT Panel 2-Supply, Installation, Testing and commissioning of indoor type wall mounted/free standing LT panel with 400A Al busbar, IEC 60947/IEC 60898 compliant breakers, RYB indication LED lamp, Voltmeter with VSS, Earthing arrangement as minimumi) Incomer as Thermal Magnetic based TPN, 400A, 35kA MCCB as per IEC 60947 with pad lockingfacility, Ics=100%Icu for 1sec., with standard accessoriesii) Outgoing feeder as below:#Thermal Magnetic based 250A, 35kA TPN MCCB, Ics=100% of Icu: 2 nos.#Thermal Magnetic based 100A, 35kA TPN MCCB, Ics=100% of Icu: 2 nos.#40A 10kA C Curve TPN MCB: 5 Nos,

Outdoor Feeder Pillars

Outdoor Feeder Pillar 1-Supply, Installation, Testing and commissioning of outdoor type free standing feeder Pillar having configuration of 100A AL colour sleeved busbar, Voltmeter with VSS, IEC 60947/IEC 60898 compliant breakers, IP 54 with canopy. Incomer of (1) Thermal Magnetic based 100A, 35kA TPN MCCB, Ics=100% of Icu and Outgoing of (1) 10A,10kA TPN C curve MCB:9 nos., (2) 16A,10kA TPN C curve MCB: 4 nos.,(3) Thermal Magnetic based 40A, 35kA TPN MCCB, Ics=100% of Icu: 5 nos.

Outdoor Feeder Pillar 2-Supply, Installation, Testing and commissioning of outdoor type free standing feeder Pillar having configuration of 40A AL colour sleeved busbar, Voltmeter with VSS, IEC 60947/IEC 60898 compliant breakers, IP 54 with canopy. Incomer of (1) Thermal Magnetic based 40A, 35kA TPN MCCB, Ics=100% of Icu and Outgoing of (1) 10A,10kA TPN C curve MCB:9 nos., (2) 16A,10kA TPN C curve MCB: 6 nos.(3) Thermal Magnetic based 40A, 35kA TPN MCCB, Ics=100% of Icu: 2 nos.

Outdoor Feeder Pillar 3-Supply, Installation, Testing and commissioning of outdoor type free standing feeder Pillar having configuration of 40A AL colour sleeved busbar, Voltmeter with VSS, IEC 60947/IEC 60898 compliant breakers, IP 54 with canopy. Incomer of (1) Thermal Magnetic based 40A, 35kA TPN MCCB, Ics=100% of Icu and Outgoing o(1) 10A,10kA TPN C curve MCB:14 nos., (2) 16A,10kA TPN C curve MCB: 5 nos.

Outdoor Feeder Pillar 4-Supply, Installation, Testing and commissioning of outdoor type free standing feeder Pillar having configuration of 40A AL colour sleeved busbar, Voltmeter with VSS, IEC 60947/IEC 60898 compliant breakers, IP 54 with canopy. Incomer of (1) Thermal Magnetic based 40A, 35kA TPN MCCB, Ics=100% of Icu and Outgoing o(1) 10A,10kA TPN C curve MCB:14 nos., (2) 16A,10kA TPN C curve MCB:3 nos., (3) 16A,10kA TPN C curve MCB: 8 nos.

HT Power Cables

Supplying , erecting & terminating 3 x 300 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

Supplying , erecting & terminating 3 x 95 sq. mm. aluminium 11kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT

LT Power Cables

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supply, erection and termination of 2C X 50 sqmm, Armoured, Al, LT XLPE cable

Supply, erection and termination of 2C X 35 sqmm, Armoured, Al, LT XLPE cable

Supply, erection and termination of 2C X 25 sqmm, Armoured, Al, LT XLPE cable

Supply, erection and termination of 2C X 16 sqmm, Armoured, Al, LT XLPE cable

Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

LT Cable Laying

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required. Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

LT Cable Termination

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and fixing brass batten/ angle holder including connections etc. as required.

Supply, installation, testing and commissioning of 20 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia = 150 mm and Bottom Dia = 460mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)

Internal Wiring

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLSPVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Outdoor Wiring

For Amphitheater and Ghat seating lighting arrangementSupplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 4 sq. mm

Outdoor Switch Socket Assembly

Supply and erection of surface mounting outdoor type IP66 enclouser including 2 nos. 16A, 2P+E socket outlet with respective 16A DPMCB and straight plug of 16A 2P+E

MCB Distribution Board

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Outdoor Junction Box

Providing & fixing junction box having size of 300x300mm & height of 80mm complete with Bakelite terminal strip of 16A/500V rating with cover having IP54 grade protection class includes dismantling of existing Junction box if any. This job includes dismantling of existing inspection/maintenance box if any.

Cable Tray

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories with supporting arrangement-(1) Standard accessories shall typically include :(a) 'Z' section support -30 x 35 mm in size - 312 mm in length - 6 nos. support for one piece ladder of 2.5 m in length each.(b) Anchor fastener & nut bolts of adequate size - 16 nos. ( 2 nos. per support)(c) Coupler plates with hardware - 70 x 200 x 3 mm thick - 2 nos. for each piece of 2.5 m ladder complete with necessary accessories such as reducer, horizontal elbow & tee, up & down vertical elbow & bend, cross piece complete erected in approved manner.(2) Cable tray shall earth properly

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 250A MCCB complete. (set of 6)

Earthing

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

GI strip 25*6 mtr 9 mtr for earthing wt 10.80kg (TATA/SAIL make)

Earth boaring

Erection of GI strip 25 X 6 mm, 9 mtr. For earthing

HDPE Pipes for Cables

Supplying and laying of 125mm Dia HDPE Pipes (For road/ pathway crossing of LT cables)

Dismentling

Dismantling the existing W.T. fluorescent fitting/ S.V./ M.V. / M.H. lamp /LED fitting from pole with brackets complete.Above rates are inclusive of transportation to the subdivisional store or as directed by sectional officer.

Dismantling of existing fluorescent fittings of any type & size.Above rates are inclusive of transportation to the subdivisional store or as directed by sectional officer.

Dismantling the existing cables of all types & size up to 10 sq. mm.The rates are for dismantling and handing over to section office inclusive of transportation up to 25 km, between site and section office.

Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq. mm. The rates are for dismantling and handing over to section office inclusive of transportation up to 25 km, between site and section office.

Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Lighting Arrangement

Supply of compact and efficient 18W ceiling mounted downlighters. High protection class and lumen output makes it versatile solution. Luminaires made up of die-cast aluminium, aluminium and SS Fasteners, clear tempered glass, silicone gasket , hybrid optics with Lens and reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting onto the ceiling, cable entries for through wiring of main supply cable. Integral constant current power supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IK07, IP65. Quick and simple installation, high luminous efficiency at reduced wattage. Clear glass in front with continuous silicone gasket to ensure adequate sealing. Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of compact and efficient 18W ceiling mounted downlighters. High protection class and lumen output makes it versatile solution. Luminaires made up of die-cast aluminium, aluminium and SS Fasteners, clear tempered glass, silicone gasket , hybrid optics with Lens and reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting onto the ceiling, cable entries for through wiring of main supply cable. Integral constant current power supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IK07, IP65. Quick and simple installation, high luminous efficiency at reduced wattage. Clear glass in front with continuous silicone gasket to ensure adequate sealing. Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of 20W recess mounted range of LED Ceiling Light. The Luminaire have high quality LED source with low energy consumption and long service life. Designed for low/ high mounted heights. The luminaires is elegantly designed fixture under the green lighting, energy efficient category. Luminaires made up of die-cast aluminium has excellent mechanical strength, aluminium heat sink for better thermal management. Reflector with excellent optical effects. Cable entries for through wiring of main supply cable. Integral constant current power supply. Prewired with LED Driver and suitable opening on 240V, 50Hz single phase ac supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IP65. Quick and simple installation, high luminous efficiency at reduced wattage. Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of 3-5W surface mounted niche light fixture designed to provide uniform illumination for low mounting heights where guidance and security lighting is required. Sustainable LED technology offers durability and optimal light output with low power consumption. Luminaires made up of pressure die-cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Non yellowing UV stabilized semi-translucent acrylic/clear polycarbonate with EPDM/Silicone gasket.Die cast aluminium installation housing for surface mounting on wall. Cable entries for through wiring of main supply cable. Integral constant current power supply. Prewired with LED Driver and suitable opening on 240V, 50Hz single phase ac supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IP65, IK09. High visual comfort, high luminous efficiency at reduced wattage, a sleek and minimalist shape provided distinctive lighting effects for pathways. . Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of 6W LED compact spot light luminaires designed to provide directional light . The luminaire comes with connecting cables and an earth spike for portable installation or bracket for permanent installation. Luminaires housing and bracket made of die-cast aluminium, aluminium and SS Fasteners . Clear tempered safety glass. Mounting earth spike or die cast bracket arrangement to facilitate easy installation at any desired location. Swivel range of the luminaire in the horizontal axis 0°-90°. Supplied with one meter cable length and IP67 rated connector, Silicone gasket. Cable entries for through wiring of main supply cable. Integral constant current power supply pre-wired with LED driver and suitable for operating on 240V 50 Hz single phase AC supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IK06, IP66. Sturdy construction in order to maintain performance of the luminiaire and to reduce maintenance costs. Quick and simple installation. Clear glass in the front with continuous rubber gasket to ensure adequate sealing against ingress of moisture, dust, insects etc. Product should be BIS and CE Certified. Approved makes: K-Lite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of 30W LED, Dimension Ø166 x 153 x 423mm Light Distribution Symmetrical Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Facade. IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium bottom ribbed pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & Die cast aluminium housing (grade ADC12 with test certificate). SS fasteners. Die-cast aluminium mounting plate Ø100.5 x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD 55 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Mechanical resistance IK07. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Optical grade clear polycarbonate lens. Lamp fixed position. NAVI This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at L70B10. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 4KV Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of 1w In-ground recessed compact luminaire provided distinctive lighting effects for wall architecture and accent lighting. Miniature form, SS body, scratch resistance glass and special optics makes these luminaires perfect for creating very defined effects of accent light. Luminaire body and screwless front ring made from solid billet of 316 grade stainless steel. Silicone seal gasket ensuring IP67 rating, step tempered glass diffuser 4mm thickness. Clear Polycarbonate optical lens. Luminaire hard wired with 2x0.5mm² cable of 1mts length, supplied with mounting sleeve for preparing recessed opening in ground or wall. Safety Class III. Non-integral constant current power supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IK08, IP67. High luminous efficiency at reduced wattage. Supplied with IP67 rated connector for a secure connection to the network, ABS Plastic outer costing for easy installation. Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply of compact and efficient 2x6W wall mounted up-downlighters. High protection class and lumen output makes it versatile solution. Luminaires made up of die-cast aluminium, aluminium and SS Fasteners, clear tempered glass, silicone gasket , hybrid optics with Lens and reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting on the wall, cable entries for through wiring of main supply cable. Integral constant current power supply. Mac Adam step 3 LED, CRI>80, CCT 3000K, L70-B10-60000h@ Ta 25°C, IK07, IP65. Quick and simple installation, high luminous efficiency at reduced wattage. Clear glass in front with continuous silicone gasket to ensure adequate sealing. Product should be BIS and CE Certified. Approved makes: Klite/Philips/Ligman/Unilamp.The product should be Make in India and the manufacturer should have the in-house goniophotometer to check the photometery of the luminaires.

Supply, installation, testing and commissioning of Niche lights with 3W LED luminaires (Min. IP 65) for proper distribution of power to lights . The surface mounted light shall finish Pure polyester powder coated Graphite grey.(Ref image as in specifications)

Supply, installation, testing and commissioning of Uplighter with 7W LED luminaires (Min. IP 65) for proper distribution of power to lights . The surface mounted light shall finish in Pure polyester powder coated Black. (Ref image as in specifications)

Supply, installation, testing and commissioning of Uplighter with 25W LED luminaires (Min. IP 65) for proper distribution of power to lights . The surface mounted light shall finish in Pure polyester powder coated Black. (Ref image as in specifications)

Supply, installation, testing and commissioning of Uplighter with 01W LED luminaires (Min. IP 65) for proper distribution of power to lights . The surface mounted light shall finish in Pure polyester powder coated Black. (Ref image as in specifications)

Supply, installation, testing and commissioning of Uplighter with 2x6W LED luminaires (Min. IP 65) for proper distribution of power to lights . The surface mounted light shall finish in Pure polyester powder coated Black (Ref image as in specifications) connected with Two way Connector (IP 67)

Art Painting on Ramp wall

RANI LAXMI BAI 3D MURAL (SG1040FRP) SIZE - Height- 3M & Length-6M Freedom fighters Mural 3D work Material - FRP( Fiberglass ) Finish options :-Antique metal / stone/ marble looks FRP work will be done in double layer & some joining parts in 3 layers. Installation works:- All kind of civil base work for mural shall be provided by the client. *Attached Painting images only for the references. Actual work will be done in 3 D FRP

VILLAGE THEAM BASED 3D MURAL (SG1064FRP) SIZE - Height- 2.5M & Length-4M Village culture theam based murals Material - FRP( Fiberglass ) Finish options :-Antique metal / stone/ marble looks FRP work will be done in double layer & some joining parts in 3 layers. Installation works:- All kind of civil base work for mural shall be provided by the client. *Attached Painting images only for the references. Actual work will be done in 3 D FRP

PRAYER BASED 3D MURAL (SG1064FRP) SIZE - Height- 2M & Length-2M Gods Mural 3D work Material - FRP( Fiberglass ) Finish options :-Antique metal / stone/ marble looks FRP work will be done in double layer & some joining parts in 3 layers. Installation works:- All kind of civil base work for mural shall be provided by the client. *Attached Painting images only for the references. Actual work will be done in 3 D FRP

Benchs with backrest/without backrest

Providing and fixing stainless steel ( Grade 304) Benches,chair,Scultures,canoppy made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing tubes, channels, plates etc., including welding, grinding, and making curvature (wherever required) and fitting the same withbuffing, polishing necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories &amp; stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). -BENCH without Back in STAINLESS STEEL,weight-35 kg( image attached)

Providing and fixing stainless steel ( Grade 304) Banches,chair,Scultures,canoppy made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing tubes, channels, plates etc., including welding, grinding, and making curvature (wherever required) and fitting the same withbuffing, polishing necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories &amp; stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.)-BENCH with Back in STAINLESS STEEL,weight-42 kg( image attached)

Vending Kiosk

Solar System

Supplying, installing, testing and commissioning of 1 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete, with 5 years on site performance warrantee. Specification no. ESD-RT-OFG (To be installed over MS canopy).

Supplying, installing, testing and commissioning of 5 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete, with 5 years on site performance warrantee. Specification no. ESD-RT-OFG (To be installed over MS canopy).

Horticulture and landscaping work

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm Thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and then rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of Officer-in-charge

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Mimusops elengi (Bakul) TOPIARY GLOBULAR WITH HT 2.0M AND 1.2M WIDE,Minimum 3.5m overall ht ,Minimum 100mm caliper,Multibranching at 1.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS BENJAMINA,IN RECTANGULAR BOX HEDGES 1.2X 1.2M X 2.4M(ht), Minimum 3.6 / 4.0 m overall height,Minimum 100mm caliper,Multibranching at 2.4m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS BENJAMINA,IN RECTANGULAR BOX HEDGES 1.2X 1.2M X 1.2M ht, Minimum 3.6 / 4.0 m overall height,Minimum 100mm caliper,Multibranching at 2.4m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-MALALEUCA LEUCADENDRON,GOLDEN BOTTLE BRUSH TOIARY IN BALLS ( MIN 6 BALLS OF DIFFERNT DIA MIN: 200MM DIA MAX 450MM DIA) ,Minimum 2.5 / 3.0m overall height,Minimum 40mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting FICUS MICROCARPA TOPIARY IN GLOBULAR 3' DIA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting THUJA COMPACTA IN CONE 3' DIA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting FICUS BLACK IN GLOBULAR 3' DIA AT CENTRE Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Dendrocalamus Strictus(Velu) (Date Tree),Minimum 3.0/3.5m overall height, 60MM CALIPER, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Ficus infectoria (Payari) ,Minimum 3.0/3.5m overall height,Minimum 60mm caliper, Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Jasminum grandiflorum (jai)Minimum 1.0/1.5m overall height,Minimum 30mm caliper,Multibranching at 2.0m from collar

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-GOLDEN BOTTLE BRUSH ,Minimum 1500mm height@300mmc/c,Bushy, Multibranching.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.BAMBUSA VULGARIS-GOLDEN BAMBOO,Minimum 3.0/3.5m overall height,Minimum 40mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CHORISIA SPECIOSA,FLOS SILK TREE,Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-GARDENIA LATIFOLIA,CAPE JASMINE,,Multibranching at 2.0m from collarMinimum 2.0/2.5m overall height,

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-JACARANDA MIMOSIFOLIA,NEELA GULMOHAR,Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-PLUMERIA ALBA,FRANGIPANI,Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching (4-5) branches at 1.5m from collar.

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingCALISTEMON LANCEOLATUS (BOTTLE BRUSH) Minimum 3.5/4.0m overall height,Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingNYCANTHES ARBORTRISTIS Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingROYESTINIA REGIA,Minimum 3.5m overall height,Minimum 100mm caliper,10-12 fronds.

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingFOX TAIL PALM,Minimum 3.5m overall height,Minimum 100mm caliper,12-15 fronds.

Supply & Install Trees/ Palms inclusive of: (i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingWASHINGTONIA FELIFERA,Minimum 3.5m STEM HEIGHTheight, Minimum 200mm caliper,15 fronds.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ARECA PALM-SUPARI,STEM HEIGHT 3.0-3.6 Minimum 6-8 canes per palm

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingCYCUS REVOLUTA,FERN SAGO,Minimum 0.6 M trunk height,Minimum 3 whorls with 15 leaves each.

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingTHRINAX PARVIFLORA,Minimum 2.5m overall height,Minimum 100mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingLATANIA LONTAROIDES,Minimum 2.5m overall height, Minimum 100mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingPHEONIX PALM,DATE PALM,Minimum 2.5m overall height,Minimum 100mm caliper,min. 8 fronds

Supply & Install Trees/ Palms inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of plantingCHAMPANGE PALM,Minimum 1.5m overall height,Minimum 150mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting LIVISTONIA ROTUNDIFOLIA, Minimum 1.5m overall height, Minimum 100mm caliper,5 fronds.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ACALYPHA HISIPIDA CAT TAIL,Minimum 600mm height@900mmc/c,Bushy, Multibranching, Flowering.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA W GREEN,Minimum 600mm height@750mmc/c,Bushy, Multibranching.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA W RED,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA TRICOLUR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ALLAMANDA NERIFOLIA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CALLIANDRA EMARGINATA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CASSIA BIFLORA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Nerium oleander 'Petite Pink' Dwarf Pink , Minimum 900mm height@750mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-HAMELIA PATTENS,Minimum 1500mm height@900mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-JASMINUM HUMILE,Minimum 900mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-TABERNAEMONTANA CORONERIA,Minimum 600mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-TABERNAEMONTANA CORONERIA VARIEGATED,Minimum 600mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-Hibiscus Rosasinium Cooperii Minimum 600mm height @600mmc/c,Bushy

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ERANTHEMUM BICOLOUR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ERANTHEMUM TRICOLOR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS NUDA,Minimum 1200mm height@1500mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS PANDA,ROUND TOPIARY BALLS OF 2' DIA, Minimum 600mm Height@750mmc/c, Bushy, Multibranching, Flowering

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HELLICONIA METTALICA,Minimum 150mm height @200mmc/c,bushy

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-RESSULIA JUNCEA,Minimum 600mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-BRASSIA ACTINOPHYLA,Minimum 300mm height @ 900mmc/c,Bushy

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CORDYLINE TERMINALIS,Minimum 600mm height @750mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HELLICONIA HUMILIS,Minimum 300mm height @600mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HELLICONIA PSITTACORUM,Minimum 300mm height @600mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-PHILODENDRON XANADO,Minimum 300mm height @450mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-PHILODENRON WENDILANDI,Minimum 300mm height @450mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SCHEFLERA ARBORICOLA,Minimum 450mm height @450mmc/c,Minimum 3 runners per plant

Supply & Install gound covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ALTERNENTHERA RED,Minimum 150mm height @200mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ALTERNENTHERA SNOW TOP,Minimum 150mm height @200mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ASPARAGUS DENSIFLORUS,Minimum 150mm height @200mmc/c.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ASPARAGUS SPRENGERI,Minimum 300mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSUM,Minimum 150mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-NEPHROLEPIS BISERATUM FURCANS,Minimum 300mm height @200mmc/cMinimum 3 runners per plant,Minimum 300mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON BLACK GRASS.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SYNGONIUM MACROPHYLLUM,Minimum 150mm height @200mmc/cMinimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-WEDELIA TRILOBATA,Minimum 3 runners per plant,Minimum 150mm height @200mmc/c.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ZEBRINA PENDULA,Minimum 300mm height @250mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SHADE PLANTS,AGLOENEMA COMMUTATUM,Minimum 300mm height @300mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON JABURAN VAREIGATA, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON JAPONICUS,Minimum 450mm height @900mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SPATHEPHYLUM CLEVELANDI,Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM LAXUM, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSUM MILKY WAY,Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSOM VITTATUM, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply & Install plants to form hedge , inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-MURRAYA EXOTICA,Minimum 300mm height @300mmc/c,Bushy

Supply & Install plants to form hedge inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CLERODENRON MACROSIPHON,Minimum 350mm height @200mmc/c,Bushy

Supply & Install plants to form hedge inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-PHYLANTHUS NIVOSIS,Minimum 300mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-BOUGANVILLA PINK,Minimum 450 mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-DURANTA GOLDEN PLUMERI Minimum 300mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CLERODENDRON INERME,Minimum 300 mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.LOROPETALUM CHINENSIS Minimum 450mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-TECOMA CAPENSIS Minimum 150mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ACALYPHA WILKENSIANA RED Minimum 300mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-TABERNAEMONTANA CORONERIA VARIEGATTED Minimum 450 mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HEMELIA PATENS Minimum 450mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-MURRAYA PANICULATA Minimum 300 mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-FICUS LONGISLAND Minimum 150mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-FICUS PANDA Minimum 300 mm height @200mmc/c,Bushy

Supplying at site of work GOOD EARTH duly stacked at site.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Cyperus Scariosus (UMBRELLA SEDGE)Minimum 500mm height Bushy (4-5) Stems in one clump

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Arundo Donax ( GIANT REED)Minimum 1000mm height, 10m Caliper Bushy

Supply & Install Grasses inclusive of:- (i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Bambusa Vulgaris (GOLDEN BAMBOO), Minimum 2400mm height, (4-5) Stems in one clump

Supply & Install Grasses inclusive of: -(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Dendrocalamus Asper (ROUGH GIANT BAMBOO), Minimum 2.5m height, 150 Dia

Supply & Install Grasses inclusive of:-(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Pennisetum Hohenackeri (FOUNTAIN GRASS) , Minimum 900mm height, 25/30 Shoots

Supply & Install Grasses inclusive of: -(i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. (ii). Treat the pitwithChloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required (iii). Flooding the pit with water after making kiaries where required (iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.Saccharum Spontaneum (KANS GRASS), Minimum 1.0 m height, 8/10 Shoots in one clump

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. ,Cymbopogon Citratus (Lemon Grass), Minimum 600mm height, Clumps of 20/25 Grass Shoots.

JETTY (Deck)

Providing,Installation ,designing and drawing of modular floating jetty ,each size -50x50x40 cm (1 sqm=4 nos. Jetty) or each size-100x50x40 cm (1 sqm=2 nos.jetty),made of Heavy duty non-metallic HDPE side and centre connecting pin with stainless steel safety handrailing post with 3 layer nylone rope etc complete with all safety accessories as per instruction of Engineer-in-charge.( Area Taken-200 Sqm)

Lift for 16 passenger (G+1)

Supply and installation of elevator/lift capsule with two side opaque ,out door type ,machine room less(MRL),16 passenger(1088 Kg),(G+1 ,approx. height 6.5 mtr. With two stops & Two opening)automatic door with SS hairlines 304 cabin with gearless machine etc. complete with direction of Engineer-in-charge.(Lift access for footover bridge)

Escalator up and down

Supply and installation of out door type Escalator with canopy as per government norms complete with all acceessories as per direction of Engineer-in-charge.

RO with water cooler

Supply and installation of RO Plant 250 LPH an (ISO 9001 :2015 certified )with water cooler at specified location at Badkhal lake as per instruction of Engineer-in-charge.

EPDM 25-30 mm thick Flooring

Supply & Installation of 36mm Thick Wetpour system (non spike) consisting of sandwich two layers where base layer having 30mm thickness would be made of Per-Oxide size 1-4mm Ethylene Propylene Diene Monomer with 20% base polymer content, these granules to have gravity 1.6kg/cm3, hardness shore A value 60-65, ensile Strength>4.0 Mpa and elongation @ Break to be >400%. These granules to be mechanically cut with proper sieve analysis. Raw material ingredients would be mixed with pale yellow colour clear viscous liquid Poly?urethane Binder in 50kg drum having NOC Content within permissible limit of 9.50 to 10.5% Mixing ratio of Binder with weight of rubber material should not be less then 18%.

Exit sign board/electric signage/street furniture

Supply and installation of Stainless steel Exit sign board/electric signage/street furniture etc. complete with all signage as per site requirement and as per direction of Engineer-in-charge.

Arts ,Yoga and Sculpture

Siblings playing with kite Children figure Size= 7 feet Kite length including tail = 5 feet Earth dia= 4 feet Ring width = 3feet, thickness = 6 to 9 inch Material - FRP (Fiberglass) with MS framing inside to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 100KG MS frame.

Human Figure with Earth & Ring Ring Size= 11feet dia Human figure Size= 5 feet Earth dia= 4 feet Ring width = 3feet, thickness = 6 to 9 inch Material - FRP (Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double & some work in 3 layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 300 KG MS frame.

The Girl will be seen as reading book, book also made of Fiber with MS frame. Material - FRP( Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 100 KG MS frame.

Leopard Sitting Branch The leopard sitting on branch and ready to hunt. Material - FRP( Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 150 KG MS frame.

Loin will in Fiber but would have a look like its made of metal scrap and other items. Material - FRP( Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 100KG MS frame.

Each human figure will be in 4 feet height. Material - FRP( Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Scalpture with marble stone surface finishing, solid concrete work with 50 KG MS frame.

Providing,manufacturing ,fabrication and installation of art and yoga sculpture made of resin silica metal reinforcement ,height approx. 6 ft. at Badkhal lake site as per instruction of Engineer-in-charge.

Tensile structures

Supply.fabrication,grinding,installation of Tensile structures as per required pattern etc. complete with all accessories and as per direction of Engineer-in-charge.

Road work

Providing and fixing of reinforced Ferro-Cement drain coversdesigned for 'A' class loading duly marked on cover with adequatesteel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtureslike plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc.Standard Size 1500x600mm (125mm thick) for span 701 to 1200mm

Utility

Constructing providing and fixing of pre-cast RCC M-40 gradecircular Road Side Inspection Chamber including earthwork usingsulphate resistant cement with following dia and depth cylindricalpiece with 100mm wall thickness, 100mm base slab, inbuilt cover &frame on top, provision for 110mm OD in and out sewer connectionwith making proper in built benching and channel with PCC M-15grade including providing cast-in-situ 100mm thick foundation ofpCC M-10 grade, supplying and fixing circular precast SFRCCircular 300 mm dia manhole cover with frame - M.D. - 10, includingsteel reinforcement minimum @ 80kg/cum, testing for water tightness complete in all respect as per drawing, specification and the direction of the Engineer.

Pre-cast Road side inspection chamber of 450mm dia (internal), 900mm depth and 750mm dia base foundation

Pre-cast Road side inspection chamber of 450mm dia (internal), 600mm depth and 750mm dia base foundation

MAIN CUBICAL PANEL / STREET LIGHT CONTROL PANEL P/F testing & commissioning of kiosk type weather proof out door main cubical panel size 750 mm X 1250 mm X 500 mm (app.) made out of 14 gauge MS sheet front and back both side openable duly hinged door with locking arrangement by providing both side held draft and all required hard wares. The cubical should be dust and vermin proof followed by coat of zimpholite primer and finally two coats of enamal gray paint. The cubical should be mounted with hard ware on angle iron frame size 50 X 50 X 6 mm and 1500 legs duly painted framed be grouted 750 mm below ground level with cement concrete 1:3:6 in 1000 X 500 X 600 mm and providing brick masonary along angle iron frame above G.L. They shall be in two section comprising as follows: (i) Providing & Fixing 415 V ,TP MCCB 100 Amp. rating for incoming supply. (ii) Providing fixing timer switch TSQ 100 series 240 Volts, and full running service standred mounting with base of L & T or equivalent make including the cost of contactor 63 amp. 50 Hz. 440/400 volt. (iii) P/F open busbars 25mmX3mm of required length duly covered by heat shrinkable sleeves with busbar supporters (iv) Provision for residual current operated 63 Amp. 1 Pole ELCB of 30MA to 300 MA sensitively as required including making connections etc.(EE/Load stop make) (v) P/F 2 Nos. 415 Volts TPN MCCB,63 Amp. Rating for outgoing cable and making connection etc. also to have a provision for two nos. above switchs. (vi) P/F of 3 nos. RYB phase indicator resitance type complete with lamp P/F of HT danger plate of size 200 X 150 mm made of aluminium sheet 20 gauge. (vii) P/F cable glands double compression type and Al. lugs duly crimped for incoming cable and out going Cables. (viii) Providing 2 Nos. earth terminals including lugs and H/W duly inter connected with 8 SWG copper wire . (ix)Inter connection of main busbar to each out going switch and cable terminal shall be with 4 sqmm PVC copper conductor duly crimped with AL lugs. (x) Cable termination shall be fixed at backside of the panel with H/W and spring washers (xi) Light control switch with photo senser complete unit as required

P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance, of suitable wattage to achieve desired lux

Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles Single arm overhang

Supplying and installation of maintenance free Earthing with all alied materials

GI strip 25*6 mtr 9 mtr for earthing wt 10.80kg (TATA/SAIL make)

Earth boaring

Erection of GI strip 25 X 6 mm, 9 Meter For earthing

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply of LT XLPE Armoured 4 core, 16 sqmm AL cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.-4 X 16 sq. mm (28mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required. Upto 35 sq. mm

Supply and erection of 3 core PVC copper insulated and sheathed circular flexible cable size 1.5sqmm

Supply and erection of copper lugs/thimble 1.5sqmm, including crimping etc upto the entire satisfaction of engineer in charge

P & F of M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed with cement concrete mortar with required support as required.

Maintenance cost for civil works for 5 years:- 1st year maintenance

Maintenance cost for civil works for 5 years:-2nd year maintenance

Maintenance cost for civil works for 5 years:- 3rd year maintenance

Maintenance cost for civil worksfor 5 years:- 4th year maintenance

Maintenance cost for civil works for 5 years:-5th year maintenance

Maintenance cost for Electrical,Plumbing, Sanitary, Water Supply etc works for 5 years:- 1st year maintenance

Maintenance cost for Electrical,Plumbing, Sanitary, Water Supply etc works for 5 years: 2nd year maintenance

Maintenance cost for Electrical,Plumbing, Sanitary, Water Supply etc works for 5 years::- 3rd year maintenance

Maintenance cost for Electrical,Plumbing, Sanitary, Water Supply etc works for 5 years::- 4th year maintenance

Maintenance cost for Electrical,Plumbing, Sanitary, Water Supply etc works for 5 years::- 5th year maintenance

Maintenance cost for horticulture works for 5 years:- 1st year maintenance

Maintenance cost for horticulture works for 5 years: 2nd year maintenance

Maintenance cost for horticulture works for 5 years:- 3rd year maintenance

Maintenance cost for horticulture works for 5 years:- 4th year maintenance

Maintenance cost for horticulture works for 5 years:- 5th year maintenance

RK GANDHI