Supply and Fixing of High Mast Light with 16 Mtr Octagonal pole with 10X 200 Watt LED Flood Light 4 Nos at Different Places in Kanpur

Supply and fixing of 16 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 4mm, top dia minimum150mm, bottom dia minimum 360mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 &.having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes,1 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch. Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchor plates etc. Complete in all respect PWD SOR 21.2.2

Earthing with G.I Earth plate 600x600x6mm thick including accessories and providing masonry encloser with cover plate having locking arrengment and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required. DSR no 5.4

Supply and laying 25 mm x 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode including connection/terminating with G.I. nuts, bolts, spring, washer etc. as required . ( Jointing Shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) DSR no 5.9

Supply and laying of aluminium conductor PVC insulated 16 Sqmm 4 core armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on top as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

10 Sqmm 4 core PWD 2024 Sch no 20a.1.8

Supply and fixing of factory wired integral LED Flood light luminaries with die cast aluminium housing with toughend glass UV stablized PC cover and lenses built withmandatory driver set suitable for 170-200 watt. Confirming to IP 66, IK 07 and above protection completed in all respect including Labour. 20400-2400 system lumens , high power LED lenses >120 Lm/W, P>F>0.95, THD <10% at full load ,CRI>70, potted driver set in metal housing (Not Circuitory ) phase to phase protection at 440 & >300 V auto cut and re start Feature, 4 KV internal Surge protection with 5 years warrenty.PWD no 23.26

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed stee/PVC conduit as required

3X2.5 Sqmm DSR no 1.17.12

Supply and fixing following way, horizontal type three poe ans neutral, sheet steel MCB Distributuion board 415 V on surface/recess, complete with tinned copper bus bar, neutral bus bar, eath bar, din bar, interconnection, powder painted including earthing Etc. as Required. (But Without MCB/RCCB/Isolator) DSR 2025 2.4.1

4 way (4+12), Double Door