CONSTRUCTION OF ART/CRAFT ROOM (STRENGTHENING ) AT GOVT. HIGHER SECONDARY SCHOOL CHANDIMARH (ZONE BAFLIAZ) DISTRICT POONCH

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed incl. all carriages with lead & lift complete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) incl. all carriages with lead & lift complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed incl. all carriages with lead & lift complete.

Supplying and filling RBM/Boulders including watering, ramming, dressing and carriage, lead & lift complete job.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) incl. all carriages with lead & lift complete.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level incl. all carriages with lead & lift complete.

Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing bolts above 300mm in length including nuts and washers complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2.

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Second class kail wood Joists .

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick.

Providing and fixing plain, square edged wooden beading 65x12mm section with screws of approved quality for ceiling. (Ist class kail wood).

Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) kail wood.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete fixed to steel windows by welding.

6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) incl. all carriages with lead & lift complete.

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) incl. all carriages with lead & lift complete.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) incl. all carriages with lead & lift complete.

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed.

Providing and fixing glass strips in joints of terrazo/cement concrete floor.40 mm wide and 4 mm thick.

Providing and laying vitrified double charged floor tiles in size 600mmx600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (1 cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge). 35mm Thick (Second class kail wood).

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick (Second class kail wood).

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : (Second class kail wood).

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200x10 mm.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm.

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm.

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 110 mm diameter.

Providing & fixing electric points complete in all respect as per necessary as site.

Imran Khan

WAHIED AHMED

MS IKHLAQ HUSSAIN

M/S RIAZ AHMED