Improvement works by carrying out renovation civil works to the single tenement in 2Q Type Quarters North West side at 110 11 KV Kinathukadavu Sub Station

Amount

Removing the existing weathering course, clearing away the debrises from the roof top and clean the surface with water including cost of labour lead, lift, etc, complete as per standard specification.

P.C.C 1:2:4 using 10-6mm HBG metal for flooring screed concrete including cost of all materials, water proofing compound, lead, lift, labour charges etc., complete and as directed by engineer at site

Plastering with CM 1:3, 20 mm thick on brick walls using nitobond agent for bonding between old and new plastering including the cost of all material, scaffolding charges, cement, labour charges, scafolding charges, all leads, lifts, as per standard specification.

Plastering with CM 1:5, 12 mm thick on brick walls using nitobond agent for bonding between old and new plastering including the cost of all material, scaffolding charges, cement, labour charges, scafolding charges, all leads, lifts, as per standard specification.

Supply and fixing of Solid PVC door shutters using 19 gauge 19mm MS square tubes and outer frames. 15 mm square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm solid thick sheet. The shutters using 5mm thick solid PVC sheets for panelling including necessary furniture and fittings including cost of all materials lead lift etc., complete.

Fabrication, supplying and fixing of MS framed single leaf with GI sheet 18 gauge Door using MS angle 50x50x6mm for door frame and MS angle 40x40x6mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Indian Water Closet 580 mm X 440 mm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing of PVC pipe of approved quality and of reputed make suitable to resist a water pressure of 10 kg / sq.cm. To proper alignment and grade excluding cost of PVC Specials, valves, tap, etc., including labour for fixing the PVCspecials in pipe line and cost of materials like shelloc, thread, cutting, threading of pipes.-100 mm dia

40 mm dia

20 mm dia

Dismantling the existing damaged door and disposed away from site including cost of labour,T&P lead lift etc.complete

Dismantling the existing damaged floor and wall tiles and disposed away from site including cost of labour,T&P lead lift etc.complete

Supplying and fixing of pin headed glass by using 3mm thick and ISI make complete for finished item of work, complete complying with the standard specification.

Supplying and fixing with G.I sheets for sun shade including cost of all materials, farication, labour for fixing, all lead, lift, etc., complete.

Fabrication, supplying and fixing of Windows (4 Leaves) of approved size using 35x35x5mm MS angle for outer frame 25x25x3mm angle for shutter frame with shutter 18 gauge M.S.Sheet and 12mm dia bars as horizontal 11 Nos.with necessary locking arrangements including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour, cost of all materials, leads, lifts labour etc., complete.

Supplying and fixing in position first quality and approvedvariety of Gun Metal Gate Valve / Wheel Valve / CheckValve / Push cock (Heavy type) with I.S.I.mark of thefollowing sizes including cost of Shellac , thread etc,.including labour for cutting and threading of .Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.(per 1 No.) - 40mm Gate Valve

20 mm Gate valve

Suppling and fixing in position 15mm.diameter brass / C.Pscrew down tap / pillar tap / swan neck tap (heavy duty)of approved make conforming to I.S.specifications andquality including cost of shellac , thread etc.complyingwith standard specifications and including cutting and threading wherever necessary (Taps should be got approved by the executive Engineer before use on the work.(per 1 No.)

Supplying and dadooing the walls with glazed tiles of approved size colour, design quality and of reputed make in CM (1:2) - 10 mm thick pointing with same coloured cement, cleaning including cost of chipping existing wall including all materials, labour, lead, lifts, etc., complete

Supplying and laying of Antiskid tiles for floor of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick

White washing two coats using shell based white cement of approved quality and of reputed make for ceiling including preparing surface curing etc., complete.

Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, labour, curing, lead, lift etc., complete.

Providing two coats of Oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift etc., complete.

Painting old iron works for steel windows & doors with two coats of best approved first quality and colour of synthetic enamel paint, complete complying with standard specification.

Supplying and fixing of cast iron man hole cover size 60x60cm cover of heavy duty including cost of all materials lead, lifts, labour etc., complete

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only