Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC VILL MUNSEFPUR PO BHARATPUR DIST BURDWAN WB PIN 713 148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹13.0 L+₹39,730 (3.15%)Rejected-Finance | L2 | Rejected-Finance Due to L2 | |
| 3 | L3₹13.7 L+₹1.1 L (9.04%)Rejected-Finance | L3 | Rejected-Finance Due to L3 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
20 Aug 2022, 6:00 pmClosed
Lt Col Arun Nair V GE AF Panagarh
GE AF PANAGARH PO PS BIRUDIAH WESTBENGAL-713148
REPAIR TO ROOF TREATMENT, ROOF SHEETING, SANITARY/ PLUMBING FITTINGS AND ALLIED WORKS AT OTM AND MD ACCN AT AIR FORCE STATION ARJAN SINGH
2022_MES_539962_1
8692/E8
Open Tender
Civil Works
Item Rate
180 days
AF STATION PANAGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE AF PANAGARH
₹30,000
Yes
31 Aug 2022
22 Jul 2022
27 Aug 2022
22 Jul 2022
20 Aug 2022
6 Aug 2022
Amount
Demolition of existing roof padding including roof treatment complete carefully by cutting, chiselling etc cleaning the surfaces by scrapping, booming brushing etc and removing the rubbish from site to a distance exc 50m and n.exc 100m all as directed by the Engineer-in-Charge and M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacture's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing coat of bitumen primer @ 0.40 Kg/Sqm complete in horizontal and vertical surfaces of sunken floor. (iii) Providing coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm over primer surfaces alongwith aluminium paint @ 0.11 Kg/Sqm over the APP. (iv) Providing a layer of APP based polymeric membrance of approved manufacturer, 4mm thick reinforced with polyester non wooven fabrix (weighing not less than 150 gm/ Sqm) laid by torch application method, side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's insructions and provided upto a height o 60cm in the parapets and inserted inside the parapets by cutting a groove and finished by membrane flashing complete all as directed.
Supply only LWPC
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering all as specified.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including washers complete all as specified.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or Eaves board, fixed with self tapping screws including washers complete all as specified.
Refixing only Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including washers complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified.
Supply and fix hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work onforming to Fe-290 Gde E-165
Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.
Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 500 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified including dismantling the old unserviceable one. Make:Sintex/ Astral/ Finolex/ Supreme
Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 25 mm dia Ball valves (Minimum weight of valve 455 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified including dismantling the old unserviceable one. Make:Sintex/ Astral/ Finolex/ Supreme
Taking up or down water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.
Taking up or down water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.
Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH
Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH
Supply and fix as in repairs, 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified. Make:- Zoloto/ Kirloskar/ Leader
Supply and fix as in repairs, white vitreous wash basin (without pedestal) ,including 32 mm dia chromium plated waste coupling, waste pipe, cutting for and pinning in ends of brackets or erecting stand complete all as specified. Make of Basin - Johnshon Cat No P6215PW/ Jaquar Cat No FNS-WHT-40801/ Cera Cat No S2040115
Supply and fix as in repairs bottle trap as per manufacturer instruction. Make:- Jaquar Cat No ALD-769L250x190/ Parryware Cat No T3202A1/ Johnson Cat No T0060C
Taking up or down water tubing 32 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.
Supply, lay and fix 32 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH
Supply and fix as in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. Make: Diamond/ Nirali/ Grohe/ Kohler
Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW
Supply and fix as in repair Vitreous China wash down water closet pan wall hung, white including fixing bolts, flushing cistern,flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including 'P' or 'S' trap complete all as specified. Make of Pan Parryware Cat No C0210/ Jaquar Cat No CNS-WHT-353S/ Cera Cat No S1031102 Make of cistern Parryware Cat No C0768/ Jaquar Cat No CNS-WHT-203/ Cera Cat No S1060102 Make of Seat cover, jet spray and trap: Parryware /Jaquar/ Cera
Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as specified. Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW
Supply and fix as in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. Make: Jaquar/ Cera/ Johnshon
Supply and fix as in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. Make: Parryware/ Prayag/ Commander
Supply and fix as in repairs 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103
Supply and fix brass CP single lever shower mixer for connection to hand shower with connecting legs & wall flanges for mixing hot and cold water complete all as specified. Make:- Parryware Cat No T3858A1/ Jaquar Cat No KUP-35149PM / Marc Cat No MMO-2030
Supply and fix as in repair frameless bathroom mirror of size 600 mm x 450 mm x 5 mm, cerium oxide polish mounted on 9 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as per manufacturer instruction. Make: Sant Gobain/ Modiguard/ Prayag
Supply and fix as in repairs 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction. Make:- Jaquar Cat No FON-40053/ Johnson Cat No T3410C/ Cera Cat No F2008201
Supply and fix as in repairs 15 mm bore CP pillar tap, quarter turn concealed type with aerator complete as per manufacturer instruction. Make:- Jaquar Cat No CON-021KN/ Parryware Cat No G4002A1/ Cera Cat No F1015101
Supply and fix as in repairs,15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030
Supply and fix as in repairs brass CP shower rose with or without swivel joints, 125 mm size, including fixing to steel pipe or union complete all as specified. Make:- Jaquar / Parryware / Marc
Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified. Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff
Material and labour as in repair 150 mm x 150 mm of size stainless steel floor trap, square type flat slooted gratings with frame as per manufacturer instruction. Make: PRAYAG/ JAQUAR/ MARC
Supply and fix as in repairs, 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. Make: Jaquar/ Cera/ Marc
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge.
Material and labour for 10 mm thick joint free premium quality dark shed vitrified ceramic tiles of size 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.
Material and labour for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4 complete all as specified.
Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 350 mm x 250 mm/ 450 mm x 350 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.
Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 300 mm x 300 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.
Material and labour for demolition of PCC including WC and removal from sunken floor, cleaning top of the RCC slab and peripherial beams, rendering 15 mm thick in cement mortar 1.3 with LWPC as per manufacturer instruction without using extra cement with directed slop and allowed to dry, application of two coats of apoxi resin (1/8 inches over all thickness in two layers) as directed, placing of GI spout of 25 mm dia and projected 300 mm apart from outer wall surface, flooding test for 72 hrs on dried surfacet, after passing the test by Engr-in-Charge, filling the sunken floor with lean concrete 1:3:6 using cinder up to required depth but sorrounding of WC pan will be filled with lime concrete and finished the surface using 40 mm thick PCC 1:2:4 finished the surface even and rough to receive top layer complete all as specified and as directed Note: Props to be placed on the bottom of the sunken slab before starting the work
Easting, adjusting, greasting steel rolling shutter, without ball beaing, as specified including top cover anchoring rod, hasp and staple and shop coat of primer, erected in position as indicated, complete push pull or manual typpe wheel & top grid wheel of joist, chennel angel or 'T' sections, fixed independently, without connecting plates incl removal of old paint two coat of synthetic enamel paint over a coat of red oxide, zinc chrome including preparation of untreated surface of any description, over 10cm width or girth not otherwise describe all as directed.
Dismantling of wall/ceiling boards (fibre, pulp,insulation etc) or insulation boards/ slabs/blanket any thickness including cover fillets all as specified.
Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong
SUPARNA TRADING
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .