GE 874/EWS-15/2023-24

Amount

EM Portion

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated FRLS cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated FRLS 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Engineer-in-charge.

All as per description of serial item No 2 here -in -before but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated FRLS copper conductor cable 1.5 Sqmm earth wire. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Engineer-in-charge.

All as per description of serial item No 2 here -in -before but for 3-pin socket out let 5 Amps on the same board with other switches with cable 1.5 sqmm size.

All as per description of serial item No 2 here -in -before but for 5-pin socket out let 15/16 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Eingineer-in-charge.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for, LED bulb 7 watt, as below. Make : Havells/Anchor/Siska/Philips

Supply and fixing surface mounted decorative bulk head edge-lit LED Luminaire comprising of high brightness LEDs of 1x10 W LED having PF not less than 0.9 all as specified and directed. Make - Havells cat part No LHEOAOP7UZ6W010 & equivalent.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor by replacing petty items such as nuts & bolts,bearing & washers, capacitor, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing Complete. For rewinding, complete old winding has to be removed and winding with new copper wire to be done. When rewinding is not possible, complete fan stator/ rotor will be changed as required.

S&F Switch piano flush type 5 Amps single pole one way. Make : Havells/Anchor/Philips

S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium gradePVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed), 20 mm dia with all fittings and accessories and one continuous run of 1.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 20mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

Supply and fixing of heating element with new one capacity of 1500 Watts (round/triangle type as per site requirement) for 25 Ltr geysers.

Supply and fixing of heating element with new one capacity of 2000 Watts for 25/ 50 Ltr geyser(round/triangle type as per site requirement).

Supply Only of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Supply only of copper Geyser Assembly with rubber packing/tank for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete all as specified.

Supply and fixing in replacement unique LED flood/ focus light 45 W LED 6500 K with IP 65 protection complete all as specified and directed by Engr-in-charge. Make Havells, Philips ,C&S

Supply and fixing recess mounting Ultra modern designer architectural LED luminaire which provides soft-light /warm white and glare free symmetrical illumination suitable for Armstrong/Grid ceiling 36 watts suitable for Armstrong/Grid ceiling compatible for Analog / DALI Dimming.Fixture size in mm (LxWxH) 595x595x65.Make Havells Cat No of fitting- VENUSNEOHE2X2PLR18-42WLED830MOD and Cat Part No of Driver LEDDRIVER36V36WS or equailent of philips/ wipro.

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHEXARP7UN1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply and fixing in replacement of LED Tube Light Driver 6W/ 10W/ 18W/ 20W /36 Watt(as required), with surge protector, input voltage variation between 140V to 290V.

Supply and fix in replacement LED 6 to 36 w (as required at site), 230v Indoor recess mounting down light circular/ square (as required at site) and flat type, Chip on Board, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make Havells, Philips ,C&S

Supply Only Table lamp, designer hanging type, 10 watts, with designer ceramic or designer glassware dome of 600mm, enamelled bronze/ stainless steel base, with LED lamp, including necessary wiring and accessories required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

S&F sheet metal enclosure for Triple Pole Neutral type DBs (double door type), with back cover, wooden enamel finish or painted (as specified and directed), when MCBs to be used 4 to 12 way (as directed) incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche, with MCB provided by MES, complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F Switch socket combination 5 in 1, 5 and 15/16 Amp flush type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips

S&F socket outlet 2-in-1, 3 pin, 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F Switch socket combination 2-in-1 5 pin 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F rectangular gaunge box/ blocks 30x25x4cm depth closed recessed, plastic/wooden pattern, as per requirement of site,complete all as specified and as directed by Engr-in -charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 4 way /6 way as per reuirement at site with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces all as specified and directed Engr- in-charge.

S&F SPN, single pole and neutral, 240 Volts , 50 Hz 10 Ka, 32-63 Amps, 300mA all as specified and as directed.

S&F MCB single pole 240 Volts , 6 to 32 Amps all as specified and as directed. Make : Havells/Legrand/Philips

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.

Supply and fix in rectification of irregular voltage, Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 110 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5%, 4-6 Sec initial delay and of capacity 6.6 KW /30 A Make V-Guard Model No VGMW1000PLUS or equivalent as approved by Engr-in-Charge.

Supply and fix of LED bulb 7 watt suitable for fixing in PVC angle holder complete all as specified. Make :- Havells, Philips and Bajaj

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

Supply and fix in replacement, Instant water heater storage type, electric,capacity 10 litres alongwith all accesories BEE 5 star rated Puro Turbo DX Lovry Pink colour Make Havells product code No GHWAPXTIV025 or /Bajaj/Philips or equivalent make as approved by Engr-in-Charge.

Supply and fixing in replacement Exhaust fan AC single phase,1200rpm 230/240V of size 250mm sweep with louvre heavy duty complete all as directed.

Supply and fix in replacement, Water heater storage type, electric,capacity 25 litres alongwith all accesories BEE 5 star rated Puro Turbo DX Lovry Pink colour Make Havells product code No GHWAPXTIV025 or /Bajaj/Philips or equivalent make as approved by Engr-in-Charge.

Supply & Laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old userviceable damaged cables of size 70 Sqmm 3.5 core. :- Make- Finolex/gloster/Havells.

All as per item above but size 35 sqmm, 3.5 core.

All as per item above but size 10 sqmm, 2.0 core.

Excavation in trenches n.exc.1.5m wide and n.exc. 1.5m in depth for foundation laying of pole stay assembly and laying of LT cable as in any type of soil and getting out complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and wall ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above the starting point

Sand cushioning to underground cables 8 cm below the cable before laying and 15cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified.

M&L for GI pipe, light grade 50 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. Make: Prakash Surya/ Jindal/ Kalinga

Cross arms bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint after preparation of surface, including taking down unserviceable/old cross arms, complete all as specified and directed.

M&L in replacement of ACSR conductor of any size and any type (as reqd on site) including stretching, fixing and binding to insulator on OH LT/HT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified.

M & L for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000(HT) volts grade. Including taking down old unserviceable pin insulator complete all as specified.

M & L for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia for 1100 (LT) volts grade. Including taking down old unserviceable pin insulator complete all as specified.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.

Supply and fixing in replacement LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in replacement LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : Havells, Crompton or equivalent.

S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-55 (11.0 metres long) including drilling of holes of reqd size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally & portion embedded in concrete, making five black & red bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height all as specified and directed.

Supply only of off load changover switch 415 volt in sheet metal enclosure 3/4 pole of capacity from 63 Amp to 250 Amp complete all as specified and directed by Engr-in-Charge Make:- Havell's or equivalent

Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Al conductor cable of size 50 to 95 sqmm (as required on site) Make:- Havell's/ Fort Gloster/Poly Cab.

Supply and fixing copper thimble of size 25 to 120 Sqmm, all as specified and directed.

Material and Laying for Plain Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping (coping to be of .60 m tall and 0.6 m in dia) and stay assembly all as specified directed.

Supply, installing, testing and commissioning of Air-break, gang operated, triple pole switch, outdoor, horizonal mounting type (ISI marked), mechanically operated with ertical isolation , mounted on insulators and steel frame with operating mechanism worked from ground level and including operation rod of 25mm dia medium grade GI pipe with and with locking arrangement including Godrej pattern 65mm pad locks with two keys for current rating 200 amp HT 11 KV with and including drop fuse set with 12 insulators and making all incoming/outgoing connections including two coats of aluminium paint over a coat of red oxide primer on steel surfaces ,complete all as specified and directed by Engr-in-Charge

Painting to HT poles, 11 mtr with cross arms, bracing and clamps with one coat of synthetic enameled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height all as specified and directed.

Supply and replacement of MCCB 100 Amp 4 Pole 415 Volt breaking capcity 16kA. Make Havells or Equivelent Make of L & T or C&S

S&F of MCCB 63 Amp TPN 415 Volt breaking capcity 35kA. Make Havells or Equivelent Make of L & T or C&S

S&F of MCCB 125 Amp TPN 415 Volt breaking capcity 35 kA. Make Havells or Equivelent Make of L & Tor C&S

S&F of MCCB 160 Amp TPN 415 Volt breaking capcity 35 kA. Make Havells or Equivelent Make of L & Tor C&S

S&F of MCCB 200 Amp TPN 415 Volt breaking apcity 35 kA. Make Havells or Equivelent Make of L & Tor C&S

S&F of MCCB 320 Amp TPN 415 Volt breaking apcity 35 kA. Make Havells or Equivelent Make of L & Tor C&S

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of item above but size 20mm bore.

All as per description of item above but size 25mm bore.

All as per description of item above but size 40mm bore.

All as per description of item above but size 50mm bore.

All as per description of item above but size 80mm bore.

S&F of GI water tubing 15 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

S&F of GI water tubing 20 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

All as per description of item above but 25mm.

All as per description of item above but 40mm.

All as per description of item above but 50mm.

All as per description of item above but 80 mm.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 15 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 40 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 50 mm complete all as specified and directed by Engr-in-Charge.

Taking down old unsv old sluice valve and supply and fixing ball valve having SS ball with both CI end flanged, ISI marked, with nuts, bolts and washer and rubber gasket with stainless steel handle over PVC coating complete all as specified and directed for 80 mm bore pipecomplete all as specified and directed. Make - Zoloto/ Bir / BVI

Taking down old unsv old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 1.6 confirming to IS 14846-2000 including necessary fixing arrengemet such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 100 mm dia complete all as specified and directed. Make - Zoloto/ Bir / BVI

Taking down old unsv old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 1.6 confirming to IS 14846-2000 including necessary fixing arrengemet such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 150 mm dia complete all as specified and directed. Make - Zoloto/ Bir / BVI

Supply and Fixing in rplacement CI Non return valve of size 100mm bore without bypass arrangement swing type confirming to IS 5312-1 flanged end, pressure rating PN 1.6 complete all as specified and directed.

Supply and Fixing in rplacement CI Non return valve of size 80mm bore without bypass arrangement swing type confirming toIS 5312 flanged end pressure rating PN 1.6 complete all as specified and directed.

Supply and replacement of 10 Sqmm 3 Core submersible copper conductor flat type for submersible pump .

Supply and replacement of 6 Sqmm 3 Core submersible copper conductor flat type for submersible pump .

Material and labour for repair of centrifugal motor pump set 60 HP (Rewinding job will be measured seperateley), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6308-02 Nos, replacement of worn out bearing housing, replacement of gland bush, unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for repair of centrifugal motor pump set 50 HP (Rewinding job will be measured seperateley), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6312-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for rewinding of 60HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engr-in Charge.

Material and labour for rewinding of 50HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engr-in Charge.

Material and labour for rewinding of 15 HP to 20 HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engr-in Charge.

Material and labour for taking out the submersible pump set and motor assembly of capacity 5 HP to 10 HP from the borewell, by taking out the column pipes with chain pulley block and tripod stand, complete using skilled and experienced labour and transporting the same to workshop for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed by the Engr - in Charge.

Material and labour for rewinding of submersible motor 25 HP by taking out the burnt out winding from the strater with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engr-in-Charge.

Material and labour for rewinding of submersible motor 5 HP by taking out the burnt out winding from the strater with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engr-in-Charge.

Material and labour for rewinding of submersible motor 15 HP by taking out the burnt out winding from the stator with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engr-in-Charge.

Supply and Fixing of 1 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessoried for installation and operation. Make : Kirloskar/ KSB/ Crompton/ Usha/ CRI/ Greaves/ Havells or equivalent as approved by engineer in charge.

Supply and fixing of 0.5 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessoried for installation and operation. Make : Kirloskar/ KSB/ Crompton/ Usha/ CRI/ Greaves/ Havells or equivalent as approved by engineer in charge.

S&F GI Union 50 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 15 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 20 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 25 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 40 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 80 mm dia complete all as specified and directed by the Engineer-in-charge.

S&F GI Union 100 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only Alum Ferric grade IV for water treatment as approved by Engr-in-Charge. Make : Aqua, Hindustan or Birla and as approved by Engr-in- Chargearge

Supply only of bleaching powder (Calcium Hypochlorite based only) having minimum chlorine content of 65% (if chlorine content is less, then proportionally more quantity will have to be given) in granular/ powder form for water disinfection, packed in hematically sealed containers. Make Rayalaseema, Altoch, Potterwatt or Aquafit or as approved approved by Engineer-in-Charge.

S&F in replacement starter for submersible pump 15 HP. Make Havells

S&F in replacement leather gasket suitable for 40/50/80/100 mm dia pipe all as directed.

S&F in replacement CI flange for 40/50/80/100 mm dia pipe tape all as directed.

M/S S. D. BUILDERS

M/S ABDUL AZIZ MIR

M/S MOHD MAQBOOL RATHER

Bidder Name

M/S S. D. BUILDERS

M/S ABDUL AZIZ MIR

AAKASH CONTRACTORS

M/S MOHD MAQBOOL RATHER