Sibian

Amount

5.2(i)/Carriage of Material Jallalabad Sand Lead upto 80 km 0 km to 80 km

5.2(i)/Carriage of Material Pathankot Sand Lead upto 280 km 0 km to 280 km

4.1+5.2/Carriage of earth and Stone sand, earth, fly, ash, bajri, shingle, spals, brick blast etc.

8.5(b)/Dismantling brick work tile masonary or tile lining.

9.8/Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

10.16/Reinforced cement concrete M-25 mechanicaly batch mixwd using batch type concrete mixer as per IS 1791 & vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

11.5/First class burnt brick work laid in cement sand mortor 1:5 in foundation and plinth.

15.7+15.48/12.5mm thick cement plaster in 1:2 and rendering.

15.59/Cement pointing 1:2 deep variety.

15.67/Cement pointing 1:2 flush on flat brick flooring

16.07/Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

16.13/Finishing walls with exterior decorative cement based paint s.a. Snowcem, Rubiacem etc. on new work two coats to give an evevn shade

17.10(xvii)/Hollock wood doors shutter windows shutter including hinges, screws chocks, cheats, stops cords etc. complete fixed in position.

18.18/Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

19.2/Dressing side slopes and preparation of sub grade for lining.

24.5/Compaction :- (b)(i)Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

(b)(ii)/Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

(b)(ii)/Extra for rolling to specifications.

28.2+28.13+28.18/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2 (xii)63mm o/d pipe of 6 Kgf. / sqcm

28.7A/Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. (c) 150mm i/d pipe lines laid complete.

28.25/Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. (a) D.I. specials upto 300mm i/d

28.27A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a) 80mm i/d Sluice Valves flanged

(b) 100mm i/d Sluice Valves flanged

(c) 150mm i/d Sluice Valves flanged

28.31/Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. (a) (d) 150mm i/d Non-return valve.

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a) /Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.66/Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b)/Size 0.90 m. x 0.90 m.

28.90/Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

29.26/First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or other special courses, to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

29.36A/Providing and fixing RCC manhole covers only. (ii)/Heavy Duty

34.10/COPPER EARTHING (Upto 8 metre in Length): (ii)/Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length) (a)Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)

NS/Cleaning of Silt from Houdies of Inlet Channel.

NS/Cleaning of Silt from Inlet Channal Pipe Line with compressor

NS/Providing and fixing floating arm with sluice valve complete in all respects

NS/Silt clearance from S&S Tank

NS/Providing and Fixing New Aluminium Ledder

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)Top Layer

(b) /2nd to Bottom Layer

NS/Repair of Raw Water Motor and Pump of 7.50 BHP

NS/Repair of Pump of Clear Water Motor 17.50 BHP

NS/Providing & fixing Shunt capastor for control panal

NS/Providing & fixing Control Switch, ampier meter for control panal

NS/Repair of Starter

NS/Providing & Fixing cutout for control panal

NS/Repair of Panal Board and Door etc.

NS/Repair of leakage of side column.

NS/Providing & Fixing Ventilator Grill/Jaali on the Top of OHSR

NS/Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)

NS/Construction of Toilet (with septic tank) for water works staff at Water Works Site (as per SBM)

NS/Provision for construction of Boundary Wall

NS/Repair of existing Sandwashing Plateform

NS/White Wash all structures at Water Works Site

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Providing and Fixing Air Vent Cowl 100 mm

NS/Provision for Painting on Sign Board at Water Works Site.

NS/Credit of old Sluice Valve (-)