SPL REPAIR TO BLDG NO. MES 41/3, 4 AND 25/3 AT PINE WALK AND PROVN OF 1X3 PHASE 30 KVA SILENT GENERATOR WITH ASSOCIATED FITMENTS AND ACCESSORIES (SPL WK) INCL MINOR WORK UNDER GE SHILLONG.

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.50sqm but not exc 4.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.50sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description not exceeding 1.0sqm each and refixing in same opening after resecuring, easing & adjusting, complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description exceeding 1.0sqm but n.exc 2.0sqm each and refixing in same opening after resecuring, easing & adjusting, complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description exceeding 1.0sqm but n.exc 2.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description not exc 1.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.

Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, appron, cill or platform etc. complete, all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating, GI based, corrugated steel sheet 0.50mm thick as in roof covering of tensile strength 550 MPa, including fixing with self driving machine made screws, washers and fittings, of same manufacture of approved profile, shape and colour etc., including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating, GI based, plain steel sheet 0.50mm thick as in ridges, hips, valley gutter, drip, straight flashing etc., of tensile strength 550 MPa, including fixing with self driving machine made screws, washers and fittings, of same manufacture of approved profile, shape and colour etc., including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed by Engr-in-charge.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS-2202 (Part-I), 1983 complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-charge.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 18/19mm thick PVC coated board grade 1 quality exterior grade commercial type fixed with screws to timber frame complete all as specified and as directed by Engineer in Charge.

S&F 0.90mm thick decorative laminate type1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instructions complete all as directed.

S&F for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work, complete, all as specified and directed.

S&F aluminium anodised barrel tower bolts and fixed of 150mm length, ISI marked complete all as specified and directed by Engr-in-charge.

S&F aluminium anodised barrel tower bolts and fixed of 100mm length, ISI marked complete all as specified and directed by Engr-in-charge.

S&F 100 mm long extruded Aluminium anodised handles fabricated, fancy type and fixed complete all as specified and directed.

S&F butt hinge 100 mm long extruded brass with mild steel hinge pin bright polished and fixed type B-11, complete, all as specified and directed.

S&F 150 mm long extruded Aluminium anodised handles fabricated type and fixed complete all as specified and directed.

S&F powder coated (minimum powder coating 50micron) anodised aluminium frame for doors, windows, ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated (minimum powder coating 50micron) anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F powder coated (minimum powder coating 50micron) anodised aluminium window and ventilator shutters, side hung/ sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. including aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 no), suitable handle(1 no) complete all as specified and upto the entire satisfaction of Engineer in charge. Note: Cost of aluminium fittings such as Door hinges etc. replaced shall deemed to be included in the rate quoted.

S&F 4.80mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 4.80mm thick glass one side frosted, glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

M&L Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 including demolition of brick or stone boulder masonry, precast concrete block walling in any position built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, not exc 10 Cm thick (with plain or interlocking joints as directed) and setting in cement sand mortar 1:4 including demolition of brick or stone boulder masonry, precast concrete block walling in any position built in cement mortar including all quoins, arches, pillars etc., complete, all as specified and directed.

M&L for 75 mm thick PCC type D-2 , (1:4:8, using 40 mm graded stone aggregates) as in sub base of floor, finishing the cement concrete surfaces even etc complete all as specified and directed by Engineer-in-Charge.

M&L for Light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor laid over etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for Light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as dado, skirting and riser etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for Glazed ceramic colour tiles of size 300 x 450 x 7mm/ 300 x 600 x 7 thick in vertical surfaces of wall such as skirting, dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed.

M&L for Granite 18-20 mm thick (table rubbed and polished) in counter basin, cooking platforms and the like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as spefied & directed.

Labour only for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation, complete as specified and directed.

Taking down of cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete including removal rubbish off premises all as specified and directed.

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound, ISI marked, complete, all as specified and as directed.

S&F 4mm thick E board 600 x 600mm pre-painted fiber building board, designer or decorative type with different design as approved by Engr-in-charge, fixed or laid/ inserted to timber/ GI/ Aluminium framework with nails as in ceiling, complete all as specified and directed.

S&F Anodized Aluminium frame work for snap grid false ceiling, comprising of Gl perimeter channel 0.55mm thick, Aluminium main T with flange 25mm and web 30mm, fixed to surrounding wall angle with flange & web 25mm each, Cross T with flange 25mm and web 25mm fixed to main T, suspended from soffit @ 1200 mm c/c using GI wire of 4mm thickness Aluminium frame will be 60 x 60 cm to receive E-board ceiling, complete, all as specified and as directed by Engr-in-charge.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete, all as specified and directed by Engineer in Charge.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing, complete, all as specified and as directed.

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern single piece size 755 x 365 x 655 with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern, complete, all as specfied and directed. Make: Jaquar Cat Part No LYS-WHT-38851PSM or equivalent in make in Prayag / Cera / Hindware.

S&F in repairs Towel Rack 600 mm Long with lower hangers, stainless steel and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190 gms), complete, all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No: AKP-35781PS or equivalent in Cera/ Hindware/ Parryware/ Prayag.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Hindware/ Jaquar & Company Pvt Ltd/ Cera (Ist Quality)/ Parryware

S&F in repair, 2-Way Bib Tap with wall flange, chromium plated, fixed to 15mm dia pipe, complete all as specified and as directed. Make: Jaquar Cat Part No. ORP-10041PM OR or equivalent make in Prayag/ Hindware/ Cera (1st Quality)/ Parryware

S&F in repair, Pillar tap,15 mm bore, brass chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete, all as specified and directed by Engr-in-Charge. Make: Prayag cat part no.7602 or equivalent make Hindware / Jaquar.

S&F 15 mm bore CP health faucet (ABS Body) with 8mm dia flexible pipe 1.20 meter long including wall hook etc complete all as specified and as directed. Make: Jaquar Cat.part No ALD-565 or equivalent model from make Hindware / Prayag.

S&F in repair CP soap dish holder fixed on wall with CP screws etc complete all as specified and as directed. Make: Jaquar Cat.part No AKP-35731P or equivalent model from make Hindware /Parryware/ Prayag

S&F in repair stainless steel Toilet paper roll holder with fixed on wall with CP screws etc complete all as specified and as directed. Make: Jaquar Cat.part No AKP-35755PS or equivalent model from make Hindware / Parryware/ Prayag.

S&F in repair stainless steel Towel ring square shape with round flange with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No ACN-CHR-1121N or equivalent model from make Hindware / Parryware/ Prayag.

S&F in repair CP over head shower square shape of size 150x150mm of make Jaquar cat part no. OHS-CHR-1619 with CP shower arm of size 400x25x25mm square shape foer wall mounted showers flange of make Jaquar Cat part No-SHA-455L400, complete, all as specified and directed. Make: Jaquar as per cat part above or equivalent or equivalent model in Parryware / Hindware/ Prayag

S&F in repair CP Hand shower 24x24 mm square shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5m long with nuts complete all as specified and as directed. Make: Jaquar Cat Part No HSH-35537 for hand shower and Jaquar Cat Part No-SHA-571 for flexible tube or equivalent modelin Parryware / prayag/ Cera

S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag.

S&F in repairs CP Brass angular Stop cock,15 mm bore, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. Make: Prayag Cat part No. 8010 or equivalent model from make Jaquar/ Marc/ Parryware.

S&F in repairs Brass chromium plated Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange screwed for pipe or connections including necessary pipe fittings, compete, all as specified and directed by Engineer-in-Charge. Make: Prayag/ Jaquar/ Marc/ Parryware.

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floors including pvc clamps for securing pipe etc complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floor including pvc clamps for securing pipe etc complete all as specified and directed.

S & F 110mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.

S & F 75mm bore PVC (SWR) vent cowl, complete, all as specified and directed.

S & F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof fitted to existing CI Pipe line, complete, all as specified and directed.

S & F in repairs 450mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15mm bore pipe line complete all as specified and directed.

S&F GI tubing 15mm dia. medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook including Taking up or down steel tubing with connections of 15mm bore pipe including cleaning for re-fixing or removal from site with all fittings complete all as specified and as directed.

S&F GI tubing 20mm dia. medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook including Taking up or down steel tubing with connections of 20mm bore pipe including cleaning for re-fixing or removal from site with all fittings complete all as specified and as directed.

M&L for cutting chases, of girth not exceeding 10cm for concealed water tubing or concealed conduit wiring etc, in stone/ brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and as directed.

M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats of approved shade over one coat of compatible wall primer over and including 1mm thick wall care putty to achieve smooth surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of Acrylic emulsion paint, anti fungal, dirt resistant exterior paint of required shade over and including a coat of necessary wall primer, complete, all as specified and as directed by Engr-in-charge.

M&L for complete removal of existing treatment on wall surface and preparation of old or previously treated surfaces including washing with water, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Acrylic emulsion paint, anti fungal, dirt resistant exterior paint of required shade over and including a coat of necessary wall primer, complete, all as specified and as directed by Engr-in-charge.

M&L for complete removal of existing treatment on wall surface and preparation of old or previously treated surfaces including washing with water, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying oil bound distemper two coats of approved shade over one coat of compatible wall primer over and including 1mm thick wall care putty to achieve smooth surfaces, complete, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of wood or wood based materials new surfaces of any description and girth over 10cm otherwise described and applying two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preparation of wood or wood based materials old surfaces of any description and girth over 10cm otherwise described and applying two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs decorative defree curtain rod of wooden finish of 20mm dia incl bracket or end bracket for fixining of rod, fixed on wall with screws to match the colour complete all as specified and as directed by Engineer-in-Charge.

S&F curtain rails 20mm dia. double rod brackets, stops and rollers, complete, all as directed by Engr-in-charge.

M&L for 2nd class hard wood Plain fillets square, rectangular or triangular in section , clean sawn, secured with nails or beads, sectional area exc 13Sqcm but n.exc 25Sqcm, including dismantling old and unserviceable fillets, complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap ( when open) 30 mm complete all as specified and as directed.

S&F ball catches with 8mm dia steel ball & brass body & striking plate including letting in & fixed, complete, all as specified and as directed.

S&F in repair sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. Make: Prayag / Nirali / Hindware

S&F in repair kitchen plate rack made of stainless steel sheet 1.00 mm thick of over all size 31'' x 30'' x 10'' fixed to wall with brass screws etc complete all as specified and as directed. Make: Prayag Cat part no. P-346 or Bluestar cat part No BSKPR-314 or equivalent make of Hindware / Nirali

S&F in repair 15mm bore CP sink mixer with regular spout (W/M), fixed on wall, with wall flange, to fix with 15mm bore iron pipe, complete, all as specified and as directed. Make: Prayag Cat part no.8355 or equivalent make of Hindware / Cera.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holder, regulator, switch socket outlet, bulk head fittings tube light fittings etc and making good disturbed surfaces of walls with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engr-in-charge.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC casing capping with accessories, incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately. PVC Conduit confirming to IS 9537 part I & III. Note (All chases will be cut by chase cutter only)

All as per serial item No 91 here in before but for one bell point controlled by one bell push.

All as per serial item No 91 here in before but for socket outlet point 5 Amp on same board.

All as per serial item No 91 here in before but for socket outlet point 5 Amp on Independent board.

All as per serial item No 91 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately. PVC Conduit confirming to IS 9537 part I & III. Note (All chases will be cut by chase cutter only)

All as per serial item No 96 here in before but for socket outlet point 5 Amp on same board.

All as per serial item No 96 here in before but for socket outlet point 5 Amp on Independent board.

All as per serial item No 96 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6A module 230/250 volt, AC supply, ISI Marked, white cover plate with frame, complete, all as specified and directed.

Supply and fixing modular switch 1 way 16A module 230/250 volt , AC supply, ISI Marked, white cover plate with frame, complete, all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular switch 16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, complete all as specified and directed.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix bell push, piano type, 5A, single pole, 240 V, ISI marked all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked), 2/3 pin and 5 Amps, 240 volts, complete all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15Amps, flush type, 240 volts complete all as specified and as directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked, complete, all as specified and directed. Make- Havells/anchor/ Legrand.

S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete with all accessories, including taking down old unserviceable one, complete, all aspecified and Directed by Engr-in-charge. Make: HAVELLS Cat Part Plutoneo2X2Plr28Wled857s equivalent model from Make Bajaj/CG

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size, including taking down old unserviceable one, complete, all aspecified and Directed by Engr-in-charge. Make: Havells Cat no LHEXACP7PN1W018 or PHILIPS Model no DX18 UJJWAL or Crompton cat no LCTL 18 CDL

S&F wall mounted LED batten fittings with all accessories, 1X 9 Watt LED/foot Light 6000K, extruded polycarbonate type and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make:- Philips/ Bajaj / Havells/Crompton.

S & F Table light fittngs hanging type Crystine pendant type , Elegant carved strip pattern glass design, Easy height adjustment during installation, reommaned to use with energy saving inverted lamp 7.5/ 9 watt complete with necessary connection compelete all as specified and as directed Make- Havells Item code- LHFXAHN1TN1H060

S&F wall light fitting (Florette) Alabaster glass for diffured light effect, recommended to use with energy saving lamp and synchronised design concept with 4 watt complete with necessary connection complete all as specified and as directed. Make: Havells Cat Part LHFOAIC1TZ11010 or equivalent make in Philips/ Bajaj /Crompton.

S&F wall mounted Gobleto light fittings with Elegant carved stirpped mouth blown glass design , superior glass diffffuser to minimise glare, reommanded to use with energy saving lamp 7.5 LED filment lamp - 02 Nos complete with necessary connection compelete all as specified and as directed Make- Havells Item code- LHFOAKD2TZ1C060

S&F lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.

Supply and fix and testing of storage type , electrically driven ,ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating, AC, single phase including necessary fixing arrangements, electric and water connection complete all as specified and as directed. Make: Havells Cat part no. GHWASEIB025 or equivalent make in Racold / Bajaj/ LG.

S&F heat resistant PVC connection pipe for hot and cold water, 15mm size, 450 mm long with PTMT nuts, complete, all as specified and as directed. Make: Parayag/ Polytuf/ Havells

Supply and laying GI tubing medium grade, for geyser connection, 15mm bore with all GI fittings, fixed to walls and ceiling or laid in floor for cable crossing, complete, all as specified and as directed.

S&F CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe, complete, all as specified and as directed. Make: Prayag Cat part No.7606 or equivalent model in Jaquar / Hindware/ parryware.

S&F CP Brass angular Stop cock,15 mm bore, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. Make: Prayag Cat part No. 8010 or equivalent model from make Jaquar/ Marc/ Parryware.

Supplied & fixed, Single pole and neutral enclosure with a two pin and earth plug and socket, with one single pole MCB as directed, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete, all as specified and directed.

Supply and fix in repairs MCCB Distribution board, TP&N 415 Volts 4 way, 50Hz, with IP43 protection, loadline, double door, vertical sheet metal enclosure, powder coated with 200 Amps rated busbar with neutral link, all enclosed in standard Flush mounting, fixed on wall duly grouted in solid block wall or on wooden board including incoming MCCB 100 Amps with electrical connection complete all as specified and directed. Make: Havells/ L&T/ GE/ C&S. Note: 1. MCB SP/TPN shall be measured and paid seperately under appropriate item of this schedule. 2. Copper thimble shall be used for connection of cable.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Schnieder/GE/C&S.

Supply and fix in repair MCCB TPN, 4 Pole, 240 volt, 100 Amps, 10 kA, rupturing, including taking down old unserviceable, complete, all as specified and directed. Make: Havells/ GE / C&S / L&T.

Supply and fix in repair MCCB TPN, 240 volt, 40 to 63 Amps, 10 kA, adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Havells/ GE / C&S / L&T.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete, all as specified and directed. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one complete, all as specified and directed. Make: L&T/ Schneider/ Indoasian

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 6.0 sqmm cable, one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

M&L Point wiring with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 6.0 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC conduit not less than 20mm dia with all fittings and accessories, concealed on wall/ceilling, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 6.0 sqmm cable, one run of earth wire of 6.0 sqmm and one run of PVC conduit shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 4.0 sqmm cable, one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Material and labour for sub main wiring with two single core 1.5 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 1.5 sqmm green colour as earth lead including PVC casing capping of suitable size, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 1.5 sqmm cable, one run of earth wire of 1.5 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make: Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S & F Exhaust fan 230 volts, 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion, with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and directed. Make: Bajaj Cat part No- 169821 LED/CG as part No LSTO 25 CDL equivalent model as in Philips / havells .

Supply and fixing LED security Building light LED 45 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion, with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and directed. Make: Bajaj Cat part No- 169821 LED/CG as part No LSTO 45 CDL equivalent model as in Philips / havells .

Supply and fixing in repair single phase digital electronic meters with LCD Display 5-30 Amps including all electric connection etc complete all as specified and as directed. Make- L&T Cat Part No WM101BC5DL0 or equivalent make of Legrand / Seimns. Note: Meters obtained after taking down shall be deposited to MES store and taken into credit ledger.

Supply and fix in repair, factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque junction box of size 800mm X 300mm X 170mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal, with locking arrangement suitable for fixing TPN DB 4way and energy meter single phase with glass for showing meter reading and 2 Nos M40 size cable gland and one M32 size gland suitable up to 16 Sqmm cable etc complete all as specified and directed. Make: HENSEL or equivalent in Sintex .

Supply and fix in repair, factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque junction box of size 120mm X 70mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal, with locking arrangement suitable for fixing TPN DB 4way and energy meter single phase with glass for showing meter reading and 2 Nos M40 size cable gland and one M32 size gland suitable up to 16 Sqmm cable etc complete all as specified and directed. Make: HENSEL or equivalent in Sintex .

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete including taking down old unserviceable one, all as shown in Electrical Plate No 3 of SSR part -I.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth strip 32X6mm by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete including taking down old unserviceable one, all as shown in Electrical Plate No 3 of SSR part -I.

M&L for maintenance free chemical earthing comprising of 17.2 mm dia molecularly copper bounded 250 mm micron on steel electrode 2.5 meter long each 03 nos per set, earth enhancing soil treatment compound TEREC + having essential chemical ingredients such as ionic chemical to provide stable low resistance for earth terminal to make it maintenance free ( TEREC + comes in 25 kg per bag required per set of chemical earthing ) HDPE earth pit cover medium duty to withstand 2000 kg load U clamp bolt for connecting copper strip (minimum size of copper strip 25 x 3 mm -20 meter) to earth rod. Note:- The subject item shall be executed at site by the authorised person or its agent. Approval of the same shall be obtained from Accepting Officer before execution.

M&L for PVC Cable of Three core 2.5 Sq.mm size PVC insulated, un sheathed, multi stranded aluminum conductor cables in 20 mm PVC conduit including clamp and connecting up to street light fitting. Make- Havells/ Polycab/ KEI

Material and labour Street light bracket, made out of 25 mm dia GI pipe, (medium grade) 1.5m long bend to shape as required and welded and fixing in position including dismantling and taking down old unserviceable bracket complete all as specified and directed.

Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed by Engineer in Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in any type of soil etc complete all as specified and as directed by Engineer in Charge.

Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge.

Supply lay/ spread in trenches, river sand, clean, including spreading, levelling, punning for laying/ cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection, complete, as directed by Engr-in-charge.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc., of size 70Sqmm, 3.5core, confirming to IS specifications, complete, all as specified and directed by Engr-in-charge.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc., of size 16Sqmm, 4core, confirming to IS specifications, complete, all as specified and directed by Engr-in-charge.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc., of size 16Sqmm, 2core, confirming to IS specifications, complete, all as specified and directed by Engr-in-charge.

S&F Three Phase street light time switch distribution board consisting with 32 Amps 3 pole power contactor and analogue time switch including taking down old unserviceable time switch complete all as specified and as directed by Engr-in-charge. Make: Indo Asian cat No. TL032ABO or equivalent model in Legrand/ BCH

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection, all as directed for sizes 50MM dia bore, complete, as directed by Engr-in-charge.

Supply and installation, testing, commissioning Erection of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364, complete, with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 30 KVA with following details:- Make- Ashok Leyland, DG Set Model: LP30D1 ENGINE DETAILS: Engine Rating: 30KVA, Engine Rated HP:38.6, Stroke:4, No. of Cylinders-2, RPM-1500,Cyl. Configuration -Inline, Direction of Rotation-Counter Clockwise viewed from flywheel end, Method of aspiration-Turbo charged after cooled, Method of cooling-Coolant cooled, Type of Governor-Electronic, Starting system-12V Electric Start, Overload capacity- 10% for 1hr. in every 12hrs. running, Continuous duty, Safety control-Low lube oil pressure, High coolant Temp., Standards-ISO 3046,BS 5514,Bore X Stroke-104X113mm, Displacement-1.915ltrs, Compression Ratio-16.5±0.5:1, Lube oil sump capacity-6 ltrs. Coolant capacity approx.-13 ltrs., Oil change period-600hrs or 1 year whichever is earlier, Lube oil specification-Gulf Ley power XLL Diesel Engine Oil, DG Set Dimension with Acoustic Enclosure-2000X900X1420mm (LXWXH), DG Set Weight-750Kgs (Approx).

ALTERNATOR: Rating: 30KVA , 24KW, Type : Brushless, Excitation : Self excited, self regulated (AVR), Enclosure : SPDP, Enclosure protection : IP-23, Rating : Continuous, Rated current : 30KVA: 42Amps, Rated Voltage : 415V, No. of Phases : 3Ph., 4 wire system, Frequency : 50Hz, Power factor : 0.8pf. Class of Insulation: H, Voltage Regulation: ±1%, Overload capacity: 10% for 1hr. for every 12hrs. Running, standards: IS 4722/BS 5000 ACCESSORIES: 1) Fuel Tank 75 ltrs. Capacity shall be supplied and to be mounted inside the canopy. 2) Exide make Batteries 1 No.X12V, 90Ah 3) Battery lead. 4) Anti-vibration mounting pads (fitted inside the canopy) 5) Residential silencer (fitted on top of canopy) 6) First fill of lube oil & coolant

AMF CONTROL PANEL (AUTO): Acoustic enclosure shall be made of specially procured 16SWG CRCA Sheet and structural sheet metal Base frame and comply with CPCB norms with following features: • The most compact, six sided close, modular construction and detachable. • Meet CPCB / MOEF norms. • Sound level < 75 dBA at one-meter distance. • Easy accessibility around the DG Set, which ensures optimum serviceability. • Special power coated enclosure, weather proof, corrosion resistant, environment friendly. • Specially designed lifting hooks. • Use of high-quality hardware ensures longer life of enclosure. • Provision for emergency stop facility. Fuel tank of 75ltrs Capacity specially designed and is mounted inside the enclosure as an integral part of Acoustic enclosure

Supply, install, testing and commissioning of outdoor LT distribution feeder pillar IP-65, CPRI approved of suitable size factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 200 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mmx40mmx5mm in PCC foundation and PCC work around the panel board within two feet area: INCOMING (a) MCCB 4 pole 125 Amps, 415 V, 35 KA-01 No (b) Changeover switch 125 Amps-01 No (c) LCD multi-functioning meter-01 No (d) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (e) CTs 100/5 amps-set of three (f) Aluminium bus bar 300 Amps-03 Nos and 150 Amp -01 No (g) Internal Wiring for panel incl insulators, sleeves etc OUTGOING (a) MCCB TPN 63 Amps , 25 KA-02 Nos (b) MCB SPN 63Amps , 10 KA-4 Nos (c) MCB SPN 40Amps , 10 KA-4 Nos (d) MCB SPN 32Amps , 10 KA-6 Nos

Supply, install, testing and commissioning of outdoor LT distribution feeder pillar IP-65, CPRI approved of suitable size factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 200 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mm x 40mm x 5mm in PCC foundation and PCC work around the panel board within two feet area, (near Cottage no - NCC Officer mess & Stn Cell). INCOMING (a) MCCB 4 pole 160 Amps, 415 V, 35 KA-01 No (c) LCD multi-functioning meter-01 No (d) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (e) CTs 100/5 amps-set of three (f) Aluminium bus bar 300 Amps-03 Nos and 150 Amp -01 No (g) Internal Wiring for panel incl insulators, sleeves etc OUTGOING (a) MCCB TPN 125 Amps, 25 KA-01No (a) MCCB TPN 63 Amps, 25 KA-03Nos (b) MCB SPN 32 Amps, 10 KA-2 Nos

M&L for PVC casing capping, size one/ two inch for laying of telephone cable/ data cable etc., fixed in position as per instruction, complete, all as specified and directed by Engr-in-charge.

M/S T N CONSTRUCTION