HEW 178 Construction of brick toe wall near GH-38 in sector-65, Faridabad and open gym equipment in park near H.No.2662 Sector-2 Faridabad

Air Walker :- Providing And Fixing Air Walker With Below Specifications:- Dimensions (Lxwxh) 1100x550x1480mm, Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. ‘U’ Shaped Main Frame Of Nb 65mm (G.I) ‘C’ Class Pipe. All Other Pipes Of Nb 32mm (G.I) ‘C’ Class. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres), All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured.

Double cross walker :- Providing And Fixing Double Cross Walker With Below Specifications:- Dimensions (Lxwxh): 1600x600x1600mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Handle Frame Of Nb 32mm And 25mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres).

Horse Rider Station: - Providing, designing and fixing of horse rider station of size 1200 x600 x1300 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 42mm and 32 mm dia with 3.2mm thickness all pipes/ms part made up of hot rolled tubular steel and hot dipped galvanized, And powder coated using Akzo Nobel or equivalent of 100-130 micron thick. Zinc primer paint to be applied at all welding points prior to finishing.

[11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand)

[2.B0156] B0156. Common burnt clay F.P.S. (non modular)bricks tile class designation 10

[4.14.1]Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.

[5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar

[5.70]Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

[6.8.2]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 2. 40mm thick

[7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand)