GE(S)/M-34/2021-22

Amount

M&L for Disconnecting chloronome plant vacuum operated capacity 200 gm/hr Make Jesco, alongwith components, dismantling and segregation of all parts for repair/replacement of defective parts, cleaning, washing ,re-assembling the chloronome plant and fixing in position and testing after repair complete all as specified and directed. Notes:- (i) Defective major components/spares if required shall be measured as Supply and replacement under respective items here-in-after and labour element shall be deemed to be included in this item for replacement. (ii) Non taking over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till completion of the job. (iii) All the repair shall be carried out at the installation or if required in worksshop and spare parts as under will be replaced as required as per cat part or as per existing sample. Nothing extra shall be admissible for transportation to workshop. (iv) The u/s material components to be replaced shall be assessed through a BOO to be finalised before carring out the repair

Supply only non return valve with back pressure regulator for Chlorine Gas (Pt No. 23232912) complete all as specified and directed.

Supply only single measuring glass assembly with measuring glass (Part No 33354) complete all as specified and directed.

Supply only spare measuring glass capacity 0 to 500gm/hr of chlorine gas (Part No 87011) complete all as specified and directed.

Supply only Rotometer control Nut upper side or lower side complete all as specified and directed.

Supply only gas cylinder connection with union nut (Pt No 10157/58) complete all as specified and directed.

Supply only inlet valve (Part No 35008) complete all as specified and directed.

Supply only ejector with union nut ( Part No mB 23101) complete all as specified and directed.

Supply only back stop/back pressure valve (Part No 20400060) complete all as specified and directed.

Supply only union nut (Part No 10365) complete all as specified and directed.

Supply only full Vacuum regulator complete with Gas filter, Safety relief valve, Flow meter with manual setting and Residual pressure safety device and Rotometer, measuring glass assembly suitable to Vacuum connection PE Tubing D 8/12 complete all as specified and directed.

Supply only main set for diaphragm disc with diaphragm (Part No 35026) complete all as specified and directed.

Supply only ejector nipple 3" to 8" long with PVC seat complete all as specified and directed.

Supply only rubber kit and maint set for measuring glass tube of chloronome plant complete all as specified and directed.

Supply only rubber kit and maint set for non-return valve of chloronome plant complete all as specified and directed.

Supply only rubber kit and maint set for inlet valve of chloronome plant complete all as specified and directed.

Supply only rubber kit and maint set for vaccume regulator of chloronome plant complete all as specified and directed.

Supply only PE (Polyethylene) tubing 8/12 mm complete all as specified and directed.

Repair to centrifugal/vertical booster pump up to 10 stage and up to 5 HP by dismentling and segregation of all parts, repair/replacement of defective/worn out parts, rubber/oil seal, nuts , bolts , washers, gland packing and necessary machine work welding , grinding, polishing etc. including greasing. Fixing new spare parts, re-assembling the pump and fixing in position and testing after repair complete all as specified and directed. Note:- (i) Defective major components/spares if required shall be measured as Supply and replacement under respective items here-in-after and labour element shall be deemed to be included in this item for replacement. (ii) All the repair shall be carried out at the installation or if required in worksshop and spare parts as under will be replaced as required as per cat part or as per existing sample. Nothing extra shall be admissible for transportation to workshop. (iv) The old u/s material/components to be replaced shall be assessed through a BOO to be finalised before carring out the repair

Supply only Impeller Gun Metal/Bronze complete all as specified and directed.

Supply only Discharge/Suction case housing of cast iron complete all as specified and directed.

Supply only Intermediate casing bush Gun Metal complete all as specified and directed.

Supply only Ball bearing 6202/6203 complete all as specified and directed.

Supply onlyGland nut/Cup complete all as specified and directed.

Supply only Pump motor coupling cast iron with rubber complete all as specified and directed.

S&F motor starter consist contactor,relay on off switch SPP auto/manual mode,terminal plate and volt and Amp meter complete all as specified and directed.

Supplying and laying of CPVC pipes outer dia 20mm , SDR 11 & Plain CPVC SDR 11 fittings in trenches/ wall complete all as specified and directed.

Supplying and laying of GI pipes dia 20mm medium grade with all fittings in trenches/ wall complete all as specified and directed.

S&F Gun Metal ball Valve 20 mm dia heavy duty ISI marked screwed both ends for fixing pipe complete all as specified and directed.

S&F S/S or cast iron ball Valve 20 mm dia heavy duty ISI marked screwed both ends for fixing pipe complete all as specified and directed.

Supply only water pressure guage 0-200 PSI x 4" liquid filled with valve & connecting pipe etc complete all as specified and directed.

Supply only gas pressure gauge with valve & adopter etc complete all as specified and directed.

Disconnecting Calcium Hypo chlorite dosing plant of any make and capacity alongwith components, and transporting to authorized workshop to carry out repair/replacement of defective minor spares parts i.e. spring, oil seal, pan head screw, circlip, Stroke knob and nut, bolt and washer etc. including cleaning, washing/reassembling the plants and testing after repair complete all as directed by Engr-in-charge Note:- (i) Defective major components/spares if required shall be measured as Supply and replacement under respective items here-in-after and labour element is deemed to be included in this item for replacement. (ii) All items being spare parts as under will be replaced as required as per cat part or as per existing sample. (iii) Non taking over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till completion of the job. (iv) The old u/s material components to be replaced shall be assessed through a BOO to be finalised before carring out the repair

Supply only ball ceramic (liquid end) complete all as specified and directed.

Supply only ring seal viton (liquid end) complete all as specified and directed.

Supply only suction valve seat (liquid end) complete all as specified and directed.

Supply only discharge valve housing (liquid end) complete all as specified and directed.

Supply only anti syphon valve (liquid end) complete all as specified and directed.

Supply only special function valve (liquid end) complete all as specified and directed.

Supply only low level switch (liquid end) complete all as specified and directed.

Supply only diaphragm (liquid end) complete all as specified and directed.

Supply only foot valve assembly (liquid end) complete all as specified and directed.

Supply only head for dosing plant (liquid end) complete all as specified and directed.

Supply only white suction/ discharge PE tubing complete all as specified and directed.

Supply only PP ring (EPU drive end) complete all as specified and directed.

Supply only housing for dosing plant (EPU drive end) complete all as specified and directed.

Supply only Thermostat (EPU drive end) complete all as specified and directed.

Supply only Varistor (EPU drive end) complete all as specified and directed.

Supply only Disck 0.5 SQ inch (EPU drive end) complete all as specified and directed.

Supply only EPU Assembly (EPU drive end) complete all as specified and directed.

Supply only pulsar assembly with LLS (EPU drive end) complete all as specified and directed.

Supply only rotor assembly with bearing brackets & tolerance rings pumps complete all as specified and directed.

Supply only shaft and impeller for agitator motor (as per existing sample) complete all as specified and directed.

Supply only agitator motor single phase flange mounted complete all as specified and directed.

Supply only chlorine powder dosing pump of capacity as per existing sample dosing pump complete all as specified and directed.

Supply only single head feed rate control with shaft for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

Supply only pump head (ferrules 1/4" and duckbil included) for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

Supply only roller assembly for DECRIN dosing pump set complete all as specified and directed.

Supply only pump tube for DECRIN dosing pump set complete all as specified and directed.

Supply only injection check valve 3/8" forDECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

Supply only weighted suction line strainer 3/8" for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

Supply only Check valve duckbill only (Pk of 5) for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

Supply only connecting Nut 3/8" with adapter for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.

M&L for Disconnecting Satyasai make dosing plant of any model any capacity alongwith components, for repair/replacement of minor defective spares parts i.e. filter, ceramic ball, rubber/oil seal, PVC socket, drain cap, circlip, piston stroke knob, piston sleeves, liner and nut, bolt and washer, gear oil etc.as required at installation for smooth functiong of dosing plant and greasing , cleaning, washing/reassembling and testing of dosing plant after repair complete all as specified and directed. Note:- (i) Non taking over of site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till completion of the job. (iii) Minor spare parts will be replaced as required as per cat part or as per existing sample.

M&L for Dismantlimng all parts of 3 phase 415 volts electric motor of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete and M & L for rewinding of 3 phase electric motor of 3/5 HP with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.

M&L for Dismantlimng all parts of single/three phase electric motor of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete and M & L for rewinding of single/three phase electric motor of 0.5/1 HP with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.

Supply only chlorine gas in empty cylinder of capacity rating 25 Kgs to 100 Kgs suitable for chlorination of drinking water including painting of cylinder as existing colour complete all as directed by Engineer-in-Charge. Note:- (i) In case failure of gas cylinder valve and chlorine gas leakage then contractor shall be responsible for rectification of defects immediately till stopped of leakage at site as well as at cylinder store yard by use of all safety measures. (ii) The empty cylinder shall be issued on proper gate pass for filling of chlorine gas complete all as specified and directed

Supply only Calcium Hypo Chlorite 65 to 70% (calcium based granular) disinfectant for water treatment is sealed packing of 45 Kg HDPE jars to MES store yard as directed by Engineer-in-Charge. Make of product : As per approved by E-in-C Branch/CEWC/CEPZ. (Note :- Make shall be got approved from GE before incorporation in the work)

Supply only Sodium Hypo Chlorite solution of 12.5% strength in sealed container, complete all as specified and directed by Engineer-in-Charge. Make of product : As per approved by E-in-C Branch/CEWC/CEPZ (Note :- Make shall be got approved from GE before incorporation in the work)

Supply only SCS-10K (CLO2-Chlorine Dioxide powder) for drinking water as per sample, complete all as specified and directed by Engineer-in-Charge. Make of product : As per approved by E-in-C Branch/CEWC/CEPZ (Note :- Make shall be got approved from GE before incorporation in the work)

Supply only Alum as per sample, complete all as specified and directed by Engineer-in-Charge. Make of product : As per approved by E-in-C Branch/CEWC/CEPZ (Note :- Make shall be got approved from GE before incorporation in the work)

M&L Comprehensive maintenance and servicing of DG sets of capacity 125/250KVA of any Make with replacement of defective/worn out parts by new spares such as filters, Engine oil, coolent etc including cleaning, greassing and testing after repair complete all as specified and directed. Note:- (i) Defective major components/spares if required shall be measured as Supply only under respective item here-in-after and labour element is deemed to be included in this item for replacement. (ii) All the repair carried out at the installation or if required in worksshop and spare parts as under will be replaced as required as per cat part or as per existing sample (iii) The u/s material components to be replaced shall be assessed through a BOO to be finalised before carring out the repair

Description all as per Srl item No 72 here-in-before but of 50 to 100 KVA capacity complete all as specified and directed. .

Description all as per Srl item No 72 here-in-before but of 25 to 40 KVA capacity complete all as specified and directed. .

Supply only diesel filter (Primary and baby) element with O rings for 250 KVA capacity DG set complete all as specified and directed.

Supply only diesel filter (Primary and baby) element with O rings for 100/125 KVA capacity DG set complete all as specified and directed.

Supply only diesel filter (Primary and baby) element with O ringsfor 50/63/75 KVA capacity DG set complete all as specified and directed.

Supply only diesel filter element with O rings for 25/40 KVA capacity DG set complete all as specified and directed.

Supply only engine oil filter with O rings for 250 KVA capacity DG set complete all as specified and directed.

Supply only engine oil filter with O rings for 100/125 KVA capacity DG set complete all as specified and directed.

Supply only engine oil filter with O rings 50/63/75 KVA capacity DG set complete all as specified and directed.

Supply only engine oil filter with O rings 25/40 KVA capacity DG set complete all as specified and directed.

Supply only air filter element for 125/ 250 KVA capacity DG set complete all as specified and directed.

Supply only air filter element for 50 to 100 KVA capacity DG set complete all as specified and directed.

Supply only air filter element 25/40KVA capacity DG set complete all as specified and directed.

Supply only fan belt suitable for 100 to 250 KVA capacity DG set (as per existing sample) complete all as specified and directed.

Supply only fan belt suitable for 40 to 75 KVA capacity DG set (as per existing sample) complete all as specified and directed.

Supply only radiator ruber hose pipe with clamp suitable for 100 to 250 KVA capacity DG set (as per existing sample) complete all as specified and directed.

Supply only radiator ruber hose pipe with clamp suitable for 40 to 75 KVA capacity DG set (as per existing sample) complete all as specified and directed.

Supply and filling in sump/toping up multi grade engine oil complete all as specified and directed.

Supply and filling coolent in DG set radiator complete all as specified and directed.

Supply and filling Electrolite of specific gravity in lead acid batteries of DG set complete all as specified and directed.

Supply and replacement old unsv battery brass terminal (as per existing sample) complete all as specified and directed.

Supply and replacement old unsv DG set battery lead PVC insulated multi stranded copper conductor (as per existing sample) complete all as specified and directed.

Supply and replacement old unsv fuel pipe of reqd length with end terminal for 40 to 250 KVA capacities DG set (as per existing sample) complete all as specified and directed.

M&L for disconnecting of radiator from 100 to 250 KVA DG set and transporting to authorized workshop to carry out repair i.e cleaning descaling with restore plus solution,removal of leakage, welding brazing and re-fixing it at site and testing after repair complete all as specified and directed.

M&L for disconnecting of radiator from 25 to 75 KVA DG set and transporting to authorized workshop to carry out repair i.e cleaning descaling with restore plus solution,removal of leakage, welding brazing and re-fixing it at site and testing after repair complete all as directed

M&L for disconnecting of fuel tank from 100 to 250 KVA DG set for cleaning internally and externally by removing all the dust/sadiments etc and refixing in position including replacement of fuel cap if required at site complete all as directed and specified

M&L for disconnecting of fuel tank from 25 to 75 KVA DG set for cleaning internally and externally by removing all the dust/sadiments etc and refixing in position including replacement of fuel cap if required at site complete all as directed and specified

Supply and replacement old unsv water pump for 40 to 250 KVA capacities DG set (as per existing sample) complete all as specified and directed.

Supply and replacement of fuel injector pipe set of suitable number and size maching to existing sample complete for 40 to 250 KVA capacity DG set complete all as specified and directed.

Supply and replacement old unsv oil pressure gauge as per existing sample complete all as specified and directed.

Supply and replacement old unsv Tempreture pressure gauge as per existing sample complete all as specified and directed.

Supply and replacement old unsv door hingages as per existing sample complete all as specified and directed.

Supply and replacement old unsv Ignition switch with key as per existing sample complete all as specified and directed.

M&L for repairing and overhauling of 12/24 volts self starter including replacement of flywheel ring carbon bushes,bearing bushes,re-winding of armature and filled and varnishing complete all as directed

Supply and replacement old unsv AMF panel battery charger of DG set as per existing sample complete all as specified and directed.

M&L for repairing of defective battery charger 12/24 volt of any make and type with replacement of defective parts such as rectifier, voltage regulator, Diode plate, transformer, amp meter, voltmeter etc complete all as specified and directed.

M&L for preparation of old painted surfaces for repainting complete body of DG set upto 125 KVA with superior quality super enamelled paint of colour as approved for engine alternator base frame etc using spray guns by spraying and including writing SM No/MES No complete all as specified and directed.

M&L for Disconnecting existing over heated or burnt cable terminal at existing panel and cutting out over heated / burnt portion of cable, stretching / opening cable to suitable required length from available rings and reconnecting cable in position properly by providing new lugs, tapes etc for cable size upto 95 sqmm complete all as specified and directed.

Supply and fixing in replacement volt meter 0 to 500Amp 3 phase as per existing sample complete all as specified and directed.

Supply and fixing in replacement 3 phase Ammeter as per existing sample rating complete all as specified and directed.

Supply and fixing in replacement CT as per existing sample rating complete all as specified and directed.

Supply and fixing in replacement indication lamps LED type with showing red, yellow and green colours suitable for 240 Volts AC supply complete all as specified and directed.

Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 100/125 Amps in Open execution complete all as specified and directed.

Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 200 Amps any type complete all as specified and directed.

Supplying, fixing in replacement for Contactor 3 pole, coil voltage 220/ 415 Volts, 50 Hz having current rating (AC3 ) of 40/50/70 Amps suitable for existing size and rating as per existing sample complete all as specified and directed.

Supplying, fixing in replacement for Contactor 3 pole, coil voltage 220/ 415 Volts, 50 Hz having current rating (AC3 ) of 110/140 Amps suitable for existing size and rating as per existing sample complete all as specified and directed.

Supplying, fixing in replacement for MCCB 3/4 Pole ,415 Volt , adjustable type ,63/100 Amps with breaking capacity 25 KA. Suitable to existing frame size sample complete all as specified and directed.

Supplying, fixing in replacement for MCCB 3/4 Pole ,415 Volt , adjustable type ,125/160 Amps with breaking capacity 25 KA. Suitable to existing frame size sample complete all as specified and directed.

Supplying, fixing in replacement for MCCB 3/4 Pole ,415 Volt , adjustable type, 200/250 Amps with breaking capacity 25 KA. Suitable to existing frame size sample complete all as specified and directed.

M&L for Replacement of existing unserviceable/damaged part / portion of the existing feeder pillar box / panel boards with supplying and fixing new part or portion fabricated out of 2mm thick MS sheet in position including making necessary adjustments and alignments to make the existing feeder pillar box/ panel board body to required shape(s) and size(s) complete all as specified and directed. NOTE:- (i) The panel board repaired shall be made totally enclosed, weather proof for installing incoming / outgoing MCCB / Switch fuses/ cable etc. complete all as directed (ii) The rates quoted by the contractor are deemed to be with and including necessary cutting, welding, leveling and jointing etc. as directed to match & accommodate with the existing feeder pillar box / panel board . (iii) The replaced portion shall be spray painted with two coat of synthetic enameled paint over a coat of red oxide primer.

S&F for replacement of aluminium bus bars of any shape and size including appropriate colour PVC sleeves complete all as specified and directed.

S&F in replacement of LT panel door lock chromium plated or as per existing sample complete all as specified and directed.

S&F in replacement aluminium earthing strip 25×3mm complete all as specified and directed.

S&F in replacement of automatic voltage regulator 25 to 160 KVA as per existing sample complete all as specified and directed.

S&F in replacement of automatic voltage regulator 200 to 250 KVA as per existing sample complete all as specified and directed.

S&F in replacement of 4 pole connector of different capacity DG sets as per existing sample complete all as specified and directed.

DASHMESH BUILDERS

Bidder Name

VIRAT CONSTRUCTIONS

DASHMESH BUILDERS